• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.280-287
• /
• 2016

In railway tunnels, dust is generated when trains run due to the contact between the wheels and the rails. The generated dust is suspended due to the train-induced airflow, with some of it deposited due to gravitational sedimentation. In this study, the diurnal variation of the dust concentration was investigated in a railway tunnel. A single lane of a tunnel was selected in which to observe more easily the dust concentration due to the passing of a train. Four particle-measuring instruments were utilized to detect dust ranging from 5nm to $20{\mu}m$. To synchronize the train passing time at the measuring location, a three-dimensional ultrasonic anemometer and a video camera were used. It was found that the dust concentration was significantly increased from $50{\mu}g/m^3$ to $150{\mu}g/m^3$ due to the train. Particularly, the dust concentration was greatly increased to more than $250{\mu}g/m^3$ during the morning rush-hour times.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1437-1443
• /
• 2013

Railways are currently subject to the enforcement of speed limits for each curve as prescribed by the Railway Operating Rules in Korea. However, research is required to determine the maximum speed of trains passing through each curve that allows them to run without the risk of derailment in relation to the speed enhancement of existing railway tracks. In addition, factors affecting the running safety of railway vehicles can be classified into those in terms of vehicle aspects and those in terms of track aspects. This study sought to analyze the running safety of railway vehicles according to changes in the inclination of the rail from among the factors affecting the enhancement of safety against derailment. To increase the speed of trains passing through curves that have high derailment risk, this study also analyzed the running safety of railway vehicles according to the inclination of the rail and changes in running speed while a vehicle passes through each curve section in both the up and the down train line sections between Namsunghyun and Chungdo, which represent the actual conditions of railway tracks.

• Journal of the Korean Society for information Management
• /
• v.39 no.1
• /
• pp.257-280
• /
• 2022

In this study, we analyzed comments on news articles of representative companies of the three industries (i.e., semiconductor, secondary battery, and bio industries) that had been listed as national strategic technology projects of South Korea to identify public opinions towards them. In addition, we analyzed the relationship between changes in public opinion and stock price. 'Samsung Electronics' and 'SK Hynix' in the semiconductor industry, 'Samsung SDI' and 'LG Chem' in the secondary battery industry, and 'Samsung Biologics' and 'Celltrion' in the bio-industry were selected as the representative companies and 47,452 comments of news articles about the companies that had been published from January 1, 2020, to December 31, 2020, were collected from Naver News. The comments were grouped into positive, neutral, and negative emotions, and the dynamic topics of comments over time in each group were analyzed to identify the trends of public opinion in each industry. As a result, in the case of the semiconductor industry, investment, COVID-19 related issues, trust in large companies such as Samsung Electronics, and mention of the damage caused by changes in government policy were the topics. In the case of secondary battery industries, references to investment, battery, and corporate issues were the topics. In the case of bio-industries, references to investment, COVID-19 related issues, and corporate issues were the topics. Next, to understand whether the sentiment of the comments is related to the actual stock price, for each company, the changes in the stock price and the sentiment values of the comments were compared and analyzed using visual analytics. As a result, we found a clear relationship between the changes in the sentiment value of public opinion and the stock price through the similar patterns shown in the change graphs. This study analyzed comments on news articles that are highly related to stock price, identified changes in public opinion trends in the COVID-19 era, and provided objective feedback to government agencies' policymaking.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.89-96
• /
• 2001

Agent-mediated electronic markets have been a grow-ing area of agent research and developmen tin recent year. There exist a lot of e-commerce sites on the In-ternet(e.g. Priceline, com, Amazon, com etc). These e-commerce site have proposed new business models for effective and efficient commerce activity. Intelli-gent agents have been studied very widely in the field of artificial intelligence, For purpose of this paper, an agent can act autonomously and collaboratively in a network environment on behalf of its users. It is hard for people to effectively and efficiently monitor, buy, and sell at multiple e-commerce sites. If we intro-duce agent technologies into e-commerce systems, we can expect to further enhance the intelligence of their support. In this paper, we propose a new coopera-tion mechanism among seller agents based on exchang-ing their goods in our agent-mediated electronic market system. G-Commerce. On G-Commerce, seller agents and buyer agents negotiate with each other. In our model, seller agents cooperatively negotiate in order to effectively sell goods in stock. Buyer agents coopera-tively form coalitions in order to buy goods based an discount proices. Seller agent's negotiation goods. Our current experiments show that exchanging mechanism enables seller agents to effectively sell goods in stock. Also, we present the Pareto optimality of our exchang-ing mechanism.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.29-36
• /
• 2008

In this paper, the orbital forming analysis of an automotive hub bearing was studied to predict forming performances using the explicit finite element method. To find an efficient solution technique for the orbital forming, axisymmetric finite element models and 3D solid element models were solved and numerically compared. The time scaling and mass scaling techniques were introduced to reduce the excessive computational time caused by small element size in case of the explicit finite element method. It was found from the numerical simulations on the orbital forming that the axisymmetric element models showed the similar results to the 3D solid element models in forming loads whereas the deformations at the inner race of bearing were quite different. Finally the strains at the inner race of bearing and the forming forces to the peen were measured for the same product of the numerical model by test, and were compared with the 3D solid element results. It was founded that the test results were in good agreements with the numerical ones.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.723-730
• /
• 2013

The speed-limit regulation on a turnout is the main factor inhibiting the speed-up of conventional lines. The specified speed for a train moving through a turnout system is lower than that for a train traveling over the general track. This is done to ensure the running safety of a railway vehicle moving through a turnout. In this study, the shape change example of the guard rail component of a turnout in the Daegu Metropolitan Transit Corporation (DTRO) system was studied. A theoretical examination of the geometrical interaction formula according to wheel/rail shape at the turnout was conducted. Running safety analysis by changing the length of the guard rail on the F10/F12 turnout using the developed analysis techniques (by VI-Rail) was achieved, and the effect on railway safety was examined accordingly.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.197-205
• /
• 2007

Radio frequency identification, or RFID, is a generic term for technologies that use radio wave to automatically identify people or objects. UHF RFID technology is used for everything from tracking goods within their supply chain, working in process and for other applications. If RFID is applied in wheel scanner that is a important equipment to measure a diameter, width, height of wheel, efficiency in maintenance will be improved because of checking data in real-time. In domestic technology, capacity of wheel scanner technology as well as RFID are less good than foreign goods there a up to current day a point of read range, anti-collision, a tolerance. Therefore, sturdy on the development of wheel scanner using RFID technology to measure wheel in maintenance of rolling stock was carried out in this paper.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.10a
• /
• pp.1-10
• /
• 2008

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.160-167
• /
• 2015

The reduction of energy consumption in papermaking process has been considered as one of the major issue in the paper technology. The energy efficiency of paper mill becomes more significant for the mill which manufacture the board grade products such as linerboard with recycled paper such as OCC. The application of lignocellulose spacer to the board grade paper stock would be the feasible solution by increasing the paper bulk and the drying efficiency. The major defects originated from the application of the lignocellulose spacer could be the loss of strength properties. In this study, the ways for improving the strength properties of the spacer-added linerboard were suggested and evaluated. The effects of the addition of various types polyelectrolytes were tested and the different methods of polyelectrolytes were applied for finding the efficient way. The pretreatments of lignocellulose spacer with the polyelectrolytes during wood spacer hydration resulted in the higher strength properties than the typical application method such as the addition to the mixed stock. Multilayer treatments of the spacer with polyelectrolytes were also evaluated and leaded to the higher strength properties with the similar bulk improvement.

• Journal of Information Technology Services
• /
• v.17 no.1
• /
• pp.33-45
• /
• 2018

Recently, many South Korean firms have suffered financial losses and damaged corporate images from the data breaches. Accordingly, a firm should manage their IT assets securely through an information security investment. However, the difficulty of measuring the return on an information security investment is one of the critical obstacles for firms in making such investment decisions. There have been a number of studies on the effect of IT investment so far, but there are few researches on information security investment. In this paper, based on a sample of 76 investment announcements of firms whose stocks are publicly traded in the South Korea's stock market between 2001 and 2017, we examines the market reaction to information security investment by using event study methodology. The results of the main effects indicate that self-developed is significantly related to cumulative average abnormal returns (CAARs), while no significant effect was observed for discloser, investment characteristics and firm characteristics. In addition, we find that the market reacts more favorably to the news announced by the subject of investment than the vendor, in case of investments with commercial exploitation. One of main contributions in our study is that it has revealed the factors affecting the market reaction to announcement of information security investment. It is also expected that, in practice, corporate executives will be able to help make an information security investment decision.