• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.

• Journal of Contemporary Eastern Asia
• /
• v.8 no.2
• /
• pp.27-43
• /
• 2009

A ban on political podcasting during the General Elections 2006 in Singapore was justified by the Singaporean government on the grounds that the new medium had a greater power to influence voters than traditional modes of political discourse. A between-subjects controlled experiment was conducted to test whether podcasts of political speeches had a greater power to influence voters' evaluations of political candidates and likelihood of voting for them than online text-based transcripts of the same speeches. The study also examined whether mere exposure to political speeches online, irrespective of the modality, had an effect on voters' more general political preferences, i.e. the likelihood of support and voting for the opposition. The findings suggest that political podcasts were no more persuasive than text-based websites and that the effects on political preferences, if any, were likely due the exposure to political content online, not because of the nature of the medium. The implications of the findings are discussed.

• Current Optics and Photonics
• /
• v.8 no.5
• /
• pp.484-492
• /
• 2024

In response to the difficulty of synchronously obtaining multiwavelength images for fast two-dimensional (2D) temperature measurement, a multispectral framing imaging optical system is designed, based on the segmented-aperture imaging method and asymmetric surface shape. The system adopts a common-aperture four-channel array structure to synchronously collect multiwavelength temperature-field images. To solve the problem of asymmetric aberration caused by being off-axis, a model of the relationship between incident and outgoing rays is established to calculate the asymmetric custom surface. The designed focal length of the optical system is 80 mm, the F-number is 1:3.8, and the operating wavelength range is 0.48-0.65 ㎛. The system is divided into four channels, corresponding to wavelengths of 0.48, 0.55, 0.58, and 0.65 ㎛ respectively. The modulation transfer function value of a single channel lens is higher than 0.6 in the full field of view at 35 lp/mm. The experimental results show that the asymmetric-custom-surface imaging system can capture clear multiwavelength images of a temperature field. The framing imaging system can capture clear images of multiwavelength temperature fields, with high consistency in images of different wavelengths. The designed optical system can provide reliable multiwavelength image data for 2D temperature-field measurement.

• International Commerce and Information Review
• /
• v.9 no.4
• /
• pp.395-413
• /
• 2007

The main purpose of this study is to analyze the relationships between the R&D characteristics and R&D performance for Korean enterprises. We divided R&D performance into technological and business launching performance and analyzed four R&D characteristics' effect on the performance. The empirical analysis results can be summarized as follows: First, R&D characteristics of enterprises show a strong relationship with R&D performance in the case of R&D process control. Second, firm capability and information routine positively affect to technological performance at 0.1 significant level but not showing significance in the case of business launching performance. Third, managerial support negatively affects to technological performance but dose not show statistical significance. Its effect on business launching performance, however, shows positive and significant effect. This result is expected to be highly suggestive for establishing the effective R&D strategies of enterprises and also the relevant overseas marketing plan to support R&D planning.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.354-358
• /
• 2006

In addition to documents or technologies at working place, the importance of technology management riese through increasing know-hows. In particular, in the field of construction, a variety of management systems including ERP and PMIS have been introduced since 90's. Therefore, the range of shared information extends to construction grounds, headquarters or even to collaborating companies. It means that the competitiveness of companies depends on the efficient management of technological documents in the field of construction. Accordingly, this study shows the purpose to develop the construction system which save, search and share technological information in order to improve any problem of current construction systems. The construction system offers you both the searching function and the viewing function for various information. In addition, the system contains the highlighting function to know if any information is available. The Construction system is possible to be used with current systems at the same time because is is designed to make up for them. In addition, it is expected to solve their problems and supplement their defects.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.211-218
• /
• 2018

In this paper, we propose that investigating the relationship between the dynamic capacity and the technological innovation performance of firms. Based on the previous research, we divide the dynamic capacity into the adaptive capacity, absorption capacity, and productive capacity. Among the 3,400 companies responding to the technical statistics of SMEs in 2011, we performed multiple regression analysis with 2,807 except service industries. As a result, the absorptive capacity and productive capacity have a positive effect on the technological innovation performance at the 99% level, whereas the adaptive capacity has a negative effect on the technological innovation performance at the 95% level. The implications of this study are as follows. First, in order to improve the performance of technological innovation, it is important to strengthen the absorption capacity and productive capacity of companies. Absorption capacity shows that it is important to secure sufficient R & D manpower and R & D cost to utilize internal knowledge as well as to bring outside knowledge into the capacity to assimilate and utilize external knowledge. Second, the ability to commercialize a product is a capability to commercialize a technology that has succeeded in development, showing that the technology development organization must have the capability of post-development commercialization as well as technology development. Finally it shows the negative effect on adaptation capacity and innovation performance. Companies actively utilize external sources of information in order to respond to and adapt to the rapidly changing business environment. However, the results of this study show that a strategic approach is needed to use external sources of information and technology development resources. Especially as the use of external information resources and technology development resources increases.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.628-649
• /
• 2017

Security and resource-saving are both demands of the fifth generation (5G) wireless networks. In this paper, we study the secrecy spectrum efficiency (SSE) and secrecy energy efficiency (SEE) of a K-tier massive multiple-input multiple-output (MIMO) enabled heterogeneous cellular network (HetNet), in which artificial noise (AN) are employed for secrecy enhancement. Assuming (i) independent Poisson point process model for the locations of base stations (BSs) of each tier as well as that of eavesdroppers, (ii) zero-forcing precoding at the macrocell BSs (MBSs), and (iii) maximum average received power-based cell selection, the tractable lower bound expressions for SSE and SEE of massive MIMO enabled HetNets are derived. Then, the influences on secrecy oriented spectrum and energy efficiency performance caused by the power allocation for AN, transmit antenna number, number of users served by each MBS, and eavesdropper density are analyzed respectively. Moreover, the analysis accuracy is verified by Monte Carlo simulations.

• Knowledge Management Research
• /
• v.21 no.4
• /
• pp.109-127
• /
• 2020

This study empirically investigates the effects of information search on new product development (NPD) process and performance with a sample of 82 NPD projects in 5 firms. The information search is consisted of general sources, internal sources, and external sources. The performance is consisted of technological and market performance. Findings show that information search from internal sources increases the technological knowledge of the NPD team, and information search from external sources increases the market knowledge of the NPD team. The technological and market knowledge of the NPD team increases its technical performance respectively. Only the market knowledge of the NPD team increases its market performance. Overall, the technological knowledge of the NPD team fully mediates the relationship between the information search from internal sources and its technical performance. The market knowledge of the NPD team fully mediates the relationship between the information search from external sources and its technical performance, and the relationship between the information search from external sources and its market performance. There is no other significant mediation relationships between the information searches and the performances. Implications of the research findings are discussed, and recommendation for future research are provided.

• Management & Information Systems Review
• /
• v.34 no.2
• /
• pp.21-37
• /
• 2015

Entrepreneurship and innovation are highlighted as a way to overcome limitations and risk factors caused by today's uncertain business environment. As the uncertainty in the business environment increases, organizations are required to adapt to ever changing business dynamics. For this adaptation, entrepreneurship and innovation are crucial factors. This study proposes a model to explain a structural relationship between entrepreneurship, technological innovation, and innovation performance. The unit of analysis focus is small and medium-sized businesses. Empirical results show that there are positive causal relationships from entrepreneurship to technological innovation, and from technological innovation to innovation performance. Additionally, no direct relationship from entrepreneurship to innovation performance can be achieved through innovation activities such as technological innovation. This study points out the importance of entrepreneurship and technological innovation, and suggests that entrepreneurship along with technological innovation should be internalized as business practices leading to increased performance.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.4
• /
• pp.715-739
• /
• 2006

This paper reconstructs the concept of technological systems(TSs), which was first introduced by Carlsson and Stankiewicz(1991), and applies the concept to printing technology in Korea, We examine the dynamic process of the technological system of printing technology, co-evolving with biotechnology(BT), information technology(IT), environmental technology(ET), and nano technology (NT), We found that the technology-focused science and innovation policy can reinforce other existing policy tools such as national innovation system(NIS), regional innovation system(RIS), and industrial cluster more effectively.