• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.191-204
• /
• 2003

The target costing technique, mathematically discussed by Sauers, only uses the $C_p index along with Taguchi loss function and $\bar{X}$-P control charts to setup goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p value to $\bar{X}$-P control charts to obtain goal control limits. Studies have shown that the point estimator of the $C_p index, $C_p, could vary from time to time due to the sampling error. The suggested approach is to use confidence intervals, especially the lower confidence intervals, to replace the point estimator. Therefore, an improvement on target costing technique is presented by applying the lower confidence interval of the $C_p index and using both Taguchi and Spiring's loss functions together with $\bar{X}$-P charts to make this technique more robust in practice. An example is also provided to illustrate how the improved target costing technique works.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.325-330
• /
• 2011

동익 오버랩은 축류 터빈의 성능향상을 위해 적용되며, 동익의 익단과 익근에 추가적인 높이를 적용함으로써 충분한 유로를 확보할 수 있다. 특히, 초음속 터빈에서는 동익 유로에서 의 질식 가능성을 줄이며, 설계 압력비를 구현할 수 있도록 한다. 하지만 동익 오버랩을 적용하면, 펌핑손실, 확산손실 등의 추가적인 손실이 동반된다. 따라서 터빈 성능향상을 최대화하기 위해 최적화 기법을 적용하였으며, 최적화 과정의 효율성을 위해 근사 최적화 기법을 사용하였다. 설계변수는 동익 오버랩의 형상변수이다. 연구결과를 통해, 최적화된 동익 오버랩에 의한 상당한 터빈 성능향상을 확인할 수 있었다.

• 대한물리치료과학회지
• /
• 제31권1호
• /
• pp.1-15
• /
• 2024

Background: This study was conducted to apply active release techniques to male youth basketball players to help improve physical development and damage prevention and improve performance through improved balance and functional movement. Design: Randomized control trial. Methods: The subjects included 33 youth basketball players who were randomly assigned to the experimental group (n=17) and the control group (n=16). For the experimental group, the active release technique was applied to the hip muscles, calf muscles, posterior thigh muscles based on the distribution of injuries surveyed in youth basketball players in the Korean Basksetball League. The Y-balance test and the functional reach test (FRT) were used to assess balance and the Functional Movement Screen (FMS) was used to assess functional movement. Interventions were conducted twice a week for 4 weeks at 40 minutes per session. The experimental group was the active release technique group, and static stretching, a common exercise therapy technique, and self-myofascial release using a foam roller were applied for 20 minutes. The control group received general exercise therapy and placebo active release technique. The placebo active release technique applies pressure only. results:The experimental group showed a greater improvement in balance, as evidenced by the FRT, compared to the control group, which received general exercise treatment. However, there was no statistically significant difference in improvement between the 2 groups. In the case of the experimental group, the difference in the Y balance test before and after the intervention was larger than that of the control group, but there was no statistically significant difference. Significant improvement was found in functional movement, as evidence by the FMS, for the trunk stability test (p < 0.05), in-line lunge test (p < 0.05), rotational stability test (p < 0.05), total score (p < 0.05). Conclusion: In this study, the active release technique improved the balance and functional movement of young basketball players more than general exercise therapy. The application of the active release technique is therefore expected to assist in physical development, prevent damage, and improve the performance of youth basketball players.

• 기술사
• /
• 제15권3호
• /
• pp.33-36
• /
• 1982

Dewaxing Technique was reconized as the removal of waxy materials from the lubriating distillates for the purpose of the improvement of the low temperative fluidity of the lubricating oils. Recently this technique is developed not only the removal of the waxy materials but the reformation of the waxy materials which does not effect the low temperative fluidity of the lutricating oils. The cutalytic dewaxing technique is developed is this letter direction. And so I insist here the defintion of dewaxing technique must be defined as the technique of the removal and reforming technique of the waxy materials which effect the fluidity of the lubricating oils.

• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.742-752
• /
• 2010

In case of the working machine that using in the loud-noisy workplace, as it generates the loud-noise, it is influencing a physical, mental bad effect to those workers. Accordingly, though the noise countermeasure for the loud-noisy workplace is acutely requiring, until now, those methods that wearing the soundproof-protection tool, or restriction the working hours, and minimize the noise exposure volume, were mainly used. However, such noise countermeasures occur many problem points. On such point of view, using the acoustic simulation technique, let the workers to choose the workplace where suffering many damages due to the noise of working machine, and after grasp the physical property of working machine and indoor acoustic characteristic, this Study has attempted to grasp the reduction degree of noise level at before-improvement?after-improvement, through the sound-absorption measure. Passing through such preceding step, using auralizational technique based on the noise of working machine of before-improvement after-improvement, and by conduct psycho-acoustics evaluation, this study intended to investigate the change degree of subject reaction. As the result of evaluation, it is considering that the noise-reduction countermeasure method for the loud-noisy workplace could be much effective, through the sound-absorption measure.

• 한국지반신소재학회논문집
• /
• 제12권4호
• /
• pp.35-44
• /
• 2013

본 연구에서는 개량토 벽면공을 활용한 보강성토사면의 거동에 대하여 실내모형시험 및 수치해석을 통해 분석하였다. 또한 수해발생현장에 이 연구에서의 방법을 이용하여 시험시공으로 보강성토사면을 구축한 후 약 6개월간 전면변위를 측정하여 실제 거동을 분석하였다. 실내모형시험, 수치해석, 현장시험 등을 통해 개량토 벽면공의 강성은 보강성토사면에서 충분한 벽면공의 역할을 수행할 수 있는 것으로 나타났고, 시험시공 후의 전면변위 측정결과 사면높이에 대한 수평변위의 비율은 최대 약 0.4%로 매우 안정적인 것으로 조사되었다.

• 한국가축번식학회지
• /
• 제7권2호
• /
• pp.41-52
• /
• 1983

Animal in dustry in Korea urgently needs the domestic introduction and the industrial a, pp.ication of embryo transfer technique. Namely, this technique can be utilized effectively, as means of the improvement of livestocks, as means of the increase of meat production, as means of substitute for the livestock import, and dissemination of new breed. However, as this technique avaliable in our country is remaining initial stage, we can not make use of the technique industrially unless we make much improvement as follows; induction of superovulation, non-surgical recovery of embryos, synchronization between the estrus such cycles of donor and recipient, non-surgical transfer of embryos, etc. Simultaneously, the basic studies such as harvesting oocytes from ovary, in vitro culture of oocytes, in vitro capacitation of spermatozoa, cloning by culture of blastomeres and transfer of nuclei, sexing embryo, etc. should not be neglected in order to make the technique of embryo transfer more simple and convenient. For the success of these studies, universities, national and public institutes, large scale cattle farms, and small scale cattle farms should cooperate each other. For instance, universities undertake basic researches, and the national and public institutes a, pp.y the results of the researches to animal industry along with cooperation by large scale cattle farms. By the help of the cooperative organizations, the technique relevant to our environment and farm condition may be able to be finalized, and to be a, pp.ied to samll scale cattle farm. Consequently, being served to stimulate animal productivity, this technique can be contributed to the development of livestock industry in Korea.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.404-410
• /
• 2002

Dynamic compaction is an efficient ground improvement technique for loose soils and waste landfill. The improvement is obtained by controlled high energy tamping and its effects vary with the soil properties and energy input. This study demonstrated the application of dynamic compaction method for the improvement of waste landfill in construction site. Various tests and measurements such as standard penetration test, bore hole loading test, crater settlement, ground settlement, pore water pressure were peformed during dynamic compaction field test. From the field test results, the efficiency of dynamic compaction method for the improvement of waste landfill was proved.

• 기술사
• /
• 제33권2호
• /
• pp.62-67
• /
• 2000

The trouble rank of business management of the small-medium manufacturing enterprises in Korea is constituted by that average 28.6% of production management in the worst trouble of business management from 1982 to 1999. The status of production management approaching problem is analyzed for Korean small-medium manufacturing enterprises and it us checked productivity improvement and requirement facts impede productivity improvement. It is expected to contribute much productivity improvement through a new established model of production management system and technique or tool for small-medium manufacturing enterprises in Korea.