• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.191-196
• /
• 2004

This paper is to measure and ealuates the technical efficiency, pure technical efficiency and scale efficiency with three inputs and two outputs with the use of DEA(data envelopment analysis) in Korean RCC(Rescue Co-ordination Center/RSC(Rescue Sub-Center). Several conclusion emerge. first the average efficiency of overall technical efficiency measure about $91.03\%$ and pure technical efficiency $96.80\%$ is much large then scale efficiency $93.83\%$. It means that inefficiency has much more to do whit the inefficient utilization of resources rather then the scale of production. second, DRS(decreasing return to scale) is Tongyeong and IRS(increasing return to scale) is Incheon, Taean, Gunsan, Yeosu, Ulsan, Donghae in RCC/RSC. finally, inefficiency RCC/RSC. have to benchmarking with reference sets.

• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1267-1274
• /
• 2017

A Controlled Low-Strength Materials (CLSM) is suitable for mine backfilling because it does not require compaction owing to it high fluidity and can be installed quickly. Therefore, a CLSM utilizing $CO_2$-solidified Circulating Fluidzed Bed Combustion (CFBC) coal ash was developed and it's properties were investigated, since. $CO_2$-solidification of CFBC coal ash can inhibit exudation of heavy metals. The chemical composition and specific surface area of Pulverized coal Combustion fly ash and CFBC fly ash were analyzed. The water ratio, compressive strength and length change ratio of CLSM were confirmed. The water ratios differed with the specific surface area of the CLSM. It was confirmed that the porosity of CLSM affected its compressive strength and length change ratio.

• Journal of Environmental Science International
• /
• v.27 no.2
• /
• pp.75-81
• /
• 2018

At present research on mining backfill materials is being carried out to prevent ground subsidence and breaking by underground cavern of exhausted mines. However, backfill materials can cause secondary environmental issues such as ground pollution. To solve these issues, liner and cover materials are constructed before backfill materials constructed, to inhibit toxic substances form moving to the surroundings. Liner and cover materials, however, should have an accelerating performance after construction and when the accelerating performance is degraded, the work efficiency can be lowered, and the construction cost can be increased, by many rebound content. Therefore, this study develops mining liner and cover materials, and evaluates their accelerating performance and physical properties of liner and cover materials by types and content of accelerating agent. In case of aluminate accelerating agent, it is mixed with more than 5% of liner and cover materials(binder/ratio); thus an accelerating performance satisfying Korean Industrial Standards(KS) occurs, and in case of alkali-free accelerating agent, when it is mixed with more than 7%(binder/ratio), accelerating performance satisfying KS occurs. The more the accelerating agent capacity increases, the more compressive strength decreases. In addition, it is confirmed that compressive strength of aluminate accelerating agent is more degraded than compressive strength of the alkali-free accelerating agent. It is also confirmed that drying shrinkage stability of the alkali-free accelerating agent is better than the drying shrinkage stability of the aluminate accelerating agent.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.865-873
• /
• 2021

The purpose of this study is to suggest an improvement plan for the practical evaluation method used to determine the national technical qualification in field of flower design to improve its development. First, an advisory committee was formed, after which comparisons, an analyses and matching were conducted of the currently used national technical qualifications and competency units and the competency unit elements of the National Competency Standards in an effort to strength practical skills and industrial field abilities in the field of flower design. Second, we visited an industrial site to understand the practical and technical aspects as well as the facilities and equipment used in the flower design field. The status of workers in the industrial field in the field of flower design was then analyzed. Through this process, practical examination questions were developed for improve the evaluation method. In addition, to ensure a properly configured result, a pilot test was conducted involving those majoring in the field of flower design. To investigate the feasibility of the developed exam, a survey focusing on targets related to flower design was conducted. Based on the results, by suggesting an improvement plan for the practical evaluation method of national technical qualifications in the field of flower design, it is possible to improve knowledge, technical aspects, and literacy, allowing us to train outstanding technical professionals. In the end, this study can be expected to contribute to the improvement of the flower design industry.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.57-66
• /
• 2019

This study carried out on-site investigation and precision monitoring to prepare proper design and operation technical guidelines for the use of bio gas in organic waste resources (fertilizing urine, food waste, food waste, food waste, etc.). According to the government's mid- and long-term policy on bio gasification, the expansion of waste resources is actively being pushed forward. However, facilities that use the biogas produced for urban gas and transportation are still under-efficient. Precision monitoring was carried out for biogasification facilities of organic waste resources in seven locations nationwide. When the results of precision monitoring were summarized with the four-season average, the efficiency analysis of each organic waste resource showed that the organic breakdown rate was 66.3% on average on VS basis. Analysis of biogas characteristics before and after pretreatment revealed that the $H_2S$ average of the entire facility was measured at 949.7 ppm using iron salts and desulfurization (dry, wet) and that the quality refining facility shearing and rear end was 29.0 ppm and 0.3 ppm. The methane content was found to be reduced by 65.6% at the rear of the fire tank, 63.5% at the back and 97.5% at the rear.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.277-280
• /
• 2006

Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision-making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. However, the objectives of maximising the degree of technical performance, maximising the safety levels and minimising the costs incurred are usually in conflict, and the evaluation of the technical performance, safety and costs is always associated with uncertainties, especially for a novel system at the initial concept design stage. In this paper, a design-decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. It is a Multiple Attribute Decision-Making (MADM) or Multiple Criteria Decision Making (MCDM) framework, which provides a juxtaposition of cost, safety and technical performance of a system during evaluation to assist decision makers in selecting the winning design/procurement proposal that best satisfies the requirement in hand. An illustrative example is used to demonstrate the application of the proposed framework.

• The Journal of the Korea Contents Association
• /
• v.20 no.2
• /
• pp.197-202
• /
• 2020

The business incubator is a useful system to help start-up companies, providing various supporting systems from the technical supporting system to human resources supporting system. This article investigates the moderating effect of technical support and competence support of business incubators' on the relationship between founder's experiences and performance of the company. A total 201 sample were used to empirically test the hypotheses. The results of the study partially supported the hypotheses, implying the needs of specific supporting systems for start-ups. Managerial implications are also discussed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.376-380
• /
• 2009

Peer-to-Peer content delivery technology recently begins to be used not only for file sharing applications such as eDonkey but also for every kind of content services. KBS, a broadcasting company in Korea, is aggressively driving to apply Peer-to-Peer technology to KBS's commercial internet video service but we found that there are two big huddles. First, end users may refuse to share their own resources for KBS's cost reduction using Peer-to-Peer content delivery technology. Second, it may cause that the number of free-riders increases and the efficiency of the overall system would fall. From commercial service provider's perspective, we have to avoid that end users have unfavorable impressions on the service and the usefulness of Peer-to-Peer technology decreases. In order to overcome these problems, we studied how to offer incentive to end users and how much incentive would be reasonable, and then applied the result to real service for verification.

• Journal of the Korean Society for Library and Information Science
• /
• v.36 no.3
• /
• pp.201-214
• /
• 2002

Recently, the service of the technical information(journals, proceedings) which are taken in from abroad and provided has some difficulties to make users acquire the information with ease because the bibliographic information, article and document delivery service are not linked to the related organizations. In this paper we propose to supply a high-degree retrieval service by the systematic and unitary DB construction and management and to make a nation-wide efficient management and cooperation system of the foreign technical information from abroad as building up the assigning a part of the location guide and document delivery service and cooperation system of the bibliographic information from the foreign technical resources.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.87-91
• /
• 2011

Eco-efficiency which is calculated by dividing economic productivity by the environmental load was made by synthesizing eco and efficiency from ecology and economy, proposed by World Business Council for Sustainable Development in 2000. Eco-efficiency by connection of resource efficiency with resource intensity is used as an indicator for evaluating green growth for minimizing the impact on the environment and achieving economic development as well by means of efficient use of resources. This research analyzes eco-efficiency with the case of organic agriculture promoted as a key green growth policy. Thirty questionnaires for farmers producing organic rice in Hongseong-gun, Choongcheongnam-do were used for the analysis. Eco-efficiency was measured by means of the amount of used nitrogen with respect to the amount of income, and was represented that organic agriculture was 32.0 higher than conventional agriculture. The analytical result of technical efficiency, using the (Data Envelopment Analysis (DEA) model showed that it is 0.765 which has a possibility of 21% in management improvement, and higher eco-efficiency was with higher technical efficiency. The analytical results showed that an organic agriculture contributes to green growth more than conventional agriculture. In addition, higher technical efficiency groups exhibited higher eco-efficiency indices.