• Explosives and Blasting
• /
• v.12 no.4
• /
• pp.59-63
• /
• 1994

본고는 업계에서 선진외국기술을 도입, 제휴함에 있어 대외적인 선진건설기술보유국의 기술자원화 경향의 심화로 첨단, 핵심기술의 도입 및 선정에 많은 어려움이 있어 외국의 기술도입과 관련한 국내의 제반법규의 계약서의 작성요령 등을 소개한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.711-714
• /
• 1996

The energy saving base technological processes were substantiated and high efficient equipment for the wet fractionation of the leafstalk biomass of the annual and perennial sown grasses into the multipurpose products was designed.

• Ocean and Polar Research
• /
• v.28 no.2
• /
• pp.187-199
• /
• 2006

The Kuroko-type seafloor massive sulfide deposits found in the western Pacific have been considered to have potentials for economic recovery of Au, Ag, Cu, Zn, and Pb. In this study, a preliminary model was developed for the technical and economic evaluation of them. The FRSC site on Lau Basin in the Tonga EEZ was selected as a target. In this study, no construction In for the metallurgical processing subsystem was accounted for. Instead, it was assumed to sell the Cu, Zn, and Pb concentrates to the existing sulfide customer smelter. The low total investment costs for the development make the venture very attractive. However, the result of the economic feasibility evaluation is still less attractive with the mean metal yield of the Kuroko on land. It is considered that commercial mining may be plausible if the richer metal yields are applied to the development. Quantitative information for metal yield is necessary for a more accurate evaluation. However, the important resource potential information regarding the amount of ore body, the inside structure, and the metal yields have not yet been clarified sufficiently. h addition, the flotation of ore body using seawater has not been tested yet. It is necessary to solve these problems through the experimental R&D and a survey.

• Knowledge Management Research
• /
• v.15 no.4
• /
• pp.105-126
• /
• 2014

Knowledge integration is becoming a primary function of improving organizational capabilities and performance in today's convergence paradigm. The knowledge integration capability of employees has increasingly been regarded as a critical source for developing new products and services. This study investigates the influential factors of employees' knowledge integration capability and its effects. A theoretical research model was developed based on the socio-technical perspective and information processing theory. The model includes teamwork quality, expertise, IT support, and knowledge complexity as the primary influential factors of employees' knowledge integration capability. A large-scale survey was conducted for gathering data (a total of 316 samples from 141 organizations) to test the proposed model. The test results of the hypotheses show that expertise and knowledge complexity are the significant influential factors of employees' knowledge integration capability, and also the capability has a positive effect on the knowledge creation performance of employees. Our findings contribute to the development of initiatives for promoting employees' knowledge integration capability, especially in knowledge intensive organizations focusing on convergence products and services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.1086-1094
• /
• 2008

Today's small and medium-sized enterprises in technology development for future industrial growth engine. In addition evaluation of the technological competitiveness of companies and countries for R&D investment as a significant item evaluated constantly expanding, he said. However, R&D productivity to properly measure and assess the companies rarely. This paper examines the existing technology, technology assessment, the study's limitations, the small and medium-sized companies to complement the U-IT TE and PSMP Model suggested by the design environment, and technology-related companies in the technology, the ability to comprehensively assess and as a tool to leverage, technical analysis and quantitative evaluation and production from the completion of the Process Model, presented want to formalize.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1457-1460
• /
• 2003

자바는 플랫폼에 독립적인 실행을 위해서 바이트코드를 사용하며, 자바가상머신에서 바이트코드를 해석하여 실행시키는 인터프리터 방식을 취하고 있으므로 느린 실행 시간을 갖는다. 이와 같은 느린 실행 시간에 영향을 주는 요인 중의 하나로써 다차원 배열(Multi-dimension Array)에 접근(Acess)할 때 비효율적인 방법으로 실행되는 것을 개선할 필요가 있다. 자바가상머신에서 오브젝트와 배열은 레퍼런스에 의해서 접근되어지고, 특히 다차원 배열은 배열 안에 또 다른 배열이 들어있는 자료구조를 취하기 때문에 다차원 배열의 크기가 커질수록 하나의 원소에 접근할 때 발생되는 레퍼런스(Reference)의 횟수가 많아질수록 성능 저하를 유발한다. 본 논문에서는 다차원 배열에 효율적으로 접근하기 위한 새로운 배열의 자료 구조를 제시하고, 다차원 배열에 접근하는 여러 개의 바이트코드 대신 이런 자료구조에 접근할 수 있는 새로운 바이트코드를 정의 및 구현하였다. 그리고 이를 실제 클래스파일에 적용하고, 간단한 성능 평가를 통해서 성능 개선 효과를 확인할 수 있다.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.126-129
• /
• 2006

The marine environment is under considerable threat from intentional or accidental oil spills, ballast water discharged, dredging and infilling for coastal development, and uncontrolled sewage and industrial wastewater discharges. Monitoring spills and illegal oil discharges is an important component in ensuring compliance with marine protection legislation and general protection of the coastal environments. For the monitoring task an image processing system is needed that can efficiently perform the detection and the tracking of oil spills and in this direction a significant amount of research work has taken place mainly with the use of radar (SAR) remote sensing data. In this paper the level set image segmentation technique was tested for the detection of oil spills. Level set allow the evolving curve to change topology (break and merge) and therefore boundaries of particularly intricate shapes can be extracted. Experimental results demonstrated that the level set segmentation can be used for the efficient detection and monitoring of oil spills, since the method coped with abrupt shape’s deformations and splits.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.610-614
• /
• 2006

In this paper the advanced method of geodesic active contours was developed for the task of building detection from aerial and satellite images. Automatic extraction of man-made structures including buildings, building blocks or roads from remote sensing data is useful for land use mapping, scene understanding, robotic navigation, image retrieval, surveillance, emergency management procedures, cadastral etc. A level set method based on a region-driven segmentation model was implemented with which building boundaries were detected, through this curve propagation technique. The essence of this approach is to optimize the position and the geometric form of the curve by measuring information along that curve, and within the regions that compose the image partition. To this end, one can consider uniform intensities inside objects and the background. Thus, given an initial position of the curve, one can determine global, region-driven functions and provide a statistical description of the inside and outside object area. The calculus of variations and a gradient descent method was used to optimize the variational functional by an iterative steady state process. Experimental results demonstrate the potential of the proposed processing scheme.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.209-216
• /
• 2006

A study has been conducted for an optimal processing and an apparatus for manufacturing a laser welded tube for one-body formed bumper beam. The tube dimensions used in calculation were the thickness of 1.4 mm, the diameter of 105.4 mm and the length of 2000 mm. The tube was formed of a cold rolled high strength steel plate(tensile strength of 600 MPa). The two-roll bending method was the optimal tube forming process in comparison with the UO-bending method, the bending method on the press brake, the multi-step continuous roll-forming method and the 3-roll bending method. Monitoring of the welding quality was conducted and the seam tracking along the butt-joint lengthwise to the tube axis was also examined. The longitudinal butt-joint was welded by using a $CO_2$ laser welding machine equipped with a seam tracker and a plasma sensor. The $CO_2$ laser tube welding machine could be used for precise seam tracking and real-time monitoring of the welding quality. As a result, the developed laser welded tube could be used for a one-body formed automobile bumper beam.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.317-324
• /
• 2004

Electromagnetically coupled coaxial dipole (ECCD) array antenna with and without short-ended termination is investigated theoretically. The integral equations are derived for the structure by use of the Fourier transform and mode expansion of radial waveguide. The integrals appearing in the integral equations are evaluated along the branch cut instead of real axis for a faster convergent integral. The effects of slots and dipoles, short-ended termination length, and dielectric coating on the radiation characteristics are presented. Radiation pattern of the structure is also investigated. The results of the present method are compared with those of the commercial EM simulator and good agreement is found.