• 수산경영론집
• /
• 제41권3호
• /
• pp.45-58
• /
• 2010

This study estimated the technical efficiency of coastal composite fishery in Korea by using the data envelopment analysis (DEA) and the stochastic frontier analysis (SFA) methods, and the results on the respective method were compared. In the DEA method, the constant returns to scale (CRS) and the variable returns to scale (VRS) output-oriented DEA models were separated and technical efficiencies were estimated, respectively. The average estimated value of technical efficiency by the SFA method (0.633) was found to be lower than that by the VRS-DEA method (0.738), while it was higher than that by the CRS-DEA method (0.479). It was found that strong correlation exists between the SFA method and the VRS-DEA method. The method which can utilize both methods in mutually complementing way for the estimation of technical efficiency was also considered.

• 농업과학연구
• /
• 제33권2호
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• 기술혁신연구
• /
• 제19권1호
• /
• pp.1-27
• /
• 2011

본 연구는 1984년부터 패널자료의 확보가 가능한 17개 OECD 국가를 표본으로 하여 R&D 생산성 및 효율성에 대한 실증분석을 통해 비교하고 우리나라의 수준과 특징을 살펴보고자 하였다. 이를 위해 그 성과를 산출(output) 측면과 성과(outcome) 측면으로 구분하고, 맘퀴스트 생산성지수와 자료포락분석방법을 활용하여 R&D경로단계별 생산성 및 효율성과 그 변화추이를 비교분석하였다. 우리나라는 R&D 투자 대비 산출 생산성은 매우 높은 반면, 평균효율성은 매우 낮게 나타났으며, 효율성의 시계열 변화추이를 보면 최초 지수 0.10에서 시작하여 최종 0.83까지 가파르게 상승하면서 주요 선진국들 수준에 도달하였다. R&D 산출 대비 생산성은 매우 낮으며, 통합 프런티어에 대한 효율성은 최초 지수 1.00에서 최종 0.057까지 주요 선진국들 수준으로 가파르게 하락하여 왔다. 그리고 상관분석을 통해 R&D 산출 대비 생산성이 곧 R&D 투자 대비 생산성을 가늠하는 지표가 될 수 있음을 보았다. 본 연구는 우리나라의 R&D 생산성 및 효율성 향상을 위해서는 R&D 투자 및 산출 증대의 노력이상으로 R&D 산출물의 활용 측면이 보다 강화되어야 하고 이를 위해 효과적인 기술확산 체계 구축, 기술금융시장환경 조성 및 사업화에 성공하기까지 실질적인 인큐베이팅 제공 등 전반적인 기술사업화 시스템의 혁신이 주요 과제임을 시사하고 있다.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.509-517
• /
• 2020

본 연구는 3D 프린팅 기술을 활용한 거리 가구 제작 시 기술 특성 중요도를 도출하고 거리 가구 중 비정형 벤치 제작을 통해 우선순위가 높은 3D 프린팅 기술의 적용 방안을 제시하는 것을 목적으로 한다. 본 연구를 위해 품질기능전개(QFD: Quality Function Deployment) 방식으로 중요도를 분석하여 점수로 계량화하였으며 개발 및 연구에서 우선시 되어야할 기술요소는 '출력 크기', '재료의 수축성', '출력 각도' 순으로 나타났다. 연구결과의 검증을 위해 비정형 거리 가구 디자인을 대형 3D 프린팅 출력물로 제작하였으며 제작 과정에서 우선순위 기술요소들의 적용 방안을 모색하였다. 거리 가구 제작은 기능성과 안정성을 기반으로 설계되어야 하며 경제성, 제작성, 심미성 등이 고려되어야 하므로 '출력 크기'는 파츠의 분할을 최소화시켜 안정성을 확보하였다. '재료의 수축성'은 형태의 오차를 최소화시켜 심미성 및 제작성을 충족시켰으며 마지막으로 '출력 각도'는 출력물의 품질을 향상시켜 다양한 출력 각도를 통해 효율적이고 구조적 안정성이 있는 각도를 선정함으로써 연구결과에 대한 검증과 적용 방안에 대해 제시하였다.

• Structural Monitoring and Maintenance
• /
• 제1권2호
• /
• pp.159-171
• /
• 2014

Real-time near and far-field monitoring of concrete structural components gives enough information on the time and condition at which damage occurs, thereby facilitating damage detection while in the same time evaluate the cause of the damage. This paper experimentally investigates an integrated monitoring technique for near and far-field damage detection in concrete structures based on simultaneous use of electromechanical admittance technique in combination with guided wave propagation. The proposed sensing system does not measure the electromechanical admittance itself but detect time variations in output voltages of the response signal obtained across the electrodes of piezoelectric transducers bonded on surfaces of concrete structures. The damage identification is based on the spectral estimation MUSIC algorithm. Experimental results show the efficiency and performance of the proposed measuring technique.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제65차 동계학술대회논문집 30권1호
• /
• pp.59-60
• /
• 2022

본 논문에서는 유아 영어 단어 학습 애플리케이션을 설계하고 구현한다. 이 애플리케이션은 키넥트 센서의 음성 인식 기능을 활용하여 동물과 음식 분야의 단어 학습 기능을 제공한다. 화면에 출력된 이미지에 해당하는 영어 단어를 말하면 키넥트 센서에서 그 음성을 인식하여 해당 단어의 발음이 정확한지 판별한다. 주어진 시간 내에 다양한 단어를 정확하게 발음함으로써 높은 점수를 취득하도록 구현한다.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.94-97
• /
• 2018

Lead zirconate titanate/poly-vinylidene fluoride (PZT/PVDF) piezoelectric devices were fabricated by incorporating carbon nanotubes (CNTs), for use as flexible energy harvesting devices. CNTs were added to maximize the formation of the ${\beta}$ phase of PVDF to enhance the piezoelectricity of the devices. The phase transition of PVDF induced by the addition of CNTs was confirmed by analyzing the X-ray diffraction patterns, scanning electron microscopy images, and atomic force microscopy images. The enhanced output efficiency of the PZT/PVDF piezoelectric devices was confirmed by measuring the output current and voltage of the fabricated devices. The maximum output current and voltage of the PZT/PVDF piezoelectric devices was 200 nA and 350 mV, respectively, upon incorporation of 0.06 wt% CNTs.

• 기술혁신연구
• /
• 제11권2호
• /
• pp.151-173
• /
• 2003

This paper analyses the efficiency and productivity of R&D system across time (1991${\sim}$2000) and 16 OECD countries using multi-output and multi-input non-parametric frontier methods such as DEA (data envelopement analysis) and Malmquist productivity indexes. Malmquist productivity indexes are decomposed into two components measures, namely technical change and efficiency change. To calculate R&D efficiency and productivity, we used R&D stock and the number or researchers as R&D input proxies and the number of adjusted SCI papers and U.S. patent applications as R&D output proxies. Empirical result shows that Switzerland, Canada, U.S., Australia's R&D efficiencies are the highest and Korea's R&D productivity growth is the highest in the sample for the period. Technical efficiency growth was a more important source of productivity growth than technological innovation.

• Journal of Multimedia Information System
• /
• 제2권4호
• /
• pp.317-326
• /
• 2015

The paper deals with the analysis of the effectiveness of acoustic emission monitoring and diagnostics of engineering products. We discuss the results of the processing results of the field experiment to study the acoustic emission in the alloy and its welded joints in the presence of technological defects. We study the characteristics of the output of acoustic emission signals at different stages of elastic-plastic deformation of alloys. Analyzed acoustic chart and the output waveform of the acoustic emission for the different types of welds. Studies have shown the effectiveness of the Acoustic emission techniques and help improve the accuracy of non-destructive testing systems in problems of automation and control.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.359-369
• /
• 2014

Due to the severe market conditions, pre-entrepreneur seeks to start their business through franchise company. This paper, using the data envelopment analysis(DEA) method, examines efficiency of a group of franchise company in order to provide efficiency information with pre-entrepreneur. Output-oriented DEA model is applied in the investigation of efficiency, and the overall efficiency score is decomposed into pure technical efficiency and scale efficiency. The input variables selected to evaluate the efficiency are franchise deposit, franchise contribution cost and the output variables are sales and number of franchises, and length of business. The results of this paper show franchise industry have the low level of overall efficiency and the main sources of inefficiency is found technical rather than scale. As a result, this paper provides not only the current status of efficiency information of a franchise with pre-entrepreneur but also give warning when they sign-up with franchise business.