• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.60-68
• /
• 1997

To develop paper coating technology for preventing print mottling, which is recognized as the most common printing problems in using coated papers, ink absorption properties of various coated papers were examined by employing K 8T N and Croda ink absorption tests. The influences of pigment compositions, coat weights and drying methods on these ink absorption properties were examined, and then the variations of ink absorption ratio were analyzed and discussed. It is demonstrated that the variation of Croda ink absorption ratio induced by coat weight variation can be utilized most succesfully to predict print mottling propensity of coating formulations. A systematic analysis approach was suggested that can be employed in the development of the most desirable coating color formulation to achieve target optical properties with the least print mottling.

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.391-406
• /
• 2019

The aim of this paper was to study the influence of the footing shape and the effect of the roughness of the foundation base on the bearing capacity of shallow foundations on rock masses. For this purpose the finite difference method was used to analyze the bearing capacity of various types and states of rock masses under the assumption of Hoek-Brown failure criterion, for both plane strain and axisymmetric model, and considering smooth and rough interface. The results were analyzed based on a sensitivity study of four varying parameters: foundation width, rock material constant (mo), uniaxial compressive strength and geological strength index. Knowing how each parameter influences the bearing capacity depending on the footing shape (circular vs strip footing) and the footing base interface roughness (smooth vs rough), two correlation factors were developed to estimate the percentage increase of the ultimate bearing capacity as a function of the footing shape and the roughness of the footing base interface.

• Advances in nano research
• /
• v.6 no.1
• /
• pp.39-55
• /
• 2018

Forced vibration analysis of a cracked functionally graded microbeam is investigated by using modified couple stress theory with damping effect. Mechanical properties of the functionally graded beam change vary along the thickness direction. The crack is modelled with a rotational spring. The Kelvin-Voigt model is considered in the damping effect. In solution of the dynamic problem, finite element method is used within Timoshenko beam theory in the time domain. Influences of the geometry and material parameters on forced vibration responses of cracked functionally graded microbeams are presented.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.93-101
• /
• 2016

Purpose - This study aims to advance our knowledge about factors influencing technical startup performance through analysing technical startup process empirically. This study was conducted to focus on industry structure(industry growth rate, competitive intensity, and enter barriers), technology characteristics(technical excellence and wide range of technical application), and the performance in the technology-based start-ups. Specifically, analyzing moderating effect of technology-marketing strategy, this studied how moderating variables affect technical startup performance under industry structure. Research design, data, and methodology - The subject of this study was technology-based start-ups company that received technology transfer from public organization. The development of the paper model is based on the literature of the preceding research analysis in technology commercialization, performance of technology-based start-ups, and marketing strategy. This study has a construct that was defined in the previous studies, such that technology marketing strategy was defined into the two ways of being broad or narrow in strategic application. From November 3. 2015 to December 22, 220 questionnaires were distributed with targeting to start-up companies in technology-based. 188 responses were collected for empirical analysis except the missing and wrong value responses. This data were used for structural equation modeling and regression analysis. Results - The results of this study are as follows. First, as industry structure variables influencing on performance(technical, financial) of technology-based start-ups, industry growth rate, competitive intensity and enter barriers of variables were verified; high growth rate has more positive effect on performance than low growth rate, competitive low intensity has more positive effect on performance than competitive high intensity, low enter barriers have more positive effect on performance than high enter barriers. Second, as technology characteristics variables influences on the performance(technical, financial) of technology-based start-ups, technical excellence and wide range of technical application of variables were verified ; technical high-excellence has more positive effect on performance than technology low-excellence, wide range of technical application has more positive effect on performance than narrow range of technical application. We also find that technology marketing strategy(broad/narrow) in moderating factors on performance (technical, financial) is as follows. Analyzing the moderating effect depending on technology marketing strategy(broad/narrow), application of technology, and the types of technology strategy(broad/narrow) were revealed that broad marketing strategy had a more significant effect on performance of technology-based start-ups. With AMOS, the relevancy of the study model revealed higher for broad technology-marketing strategy than narrow technology marketing strategy, and the explanatory power revealed to be 6.4% higher in broad marketing strategy than narrow marketing strategy. Conclusions - This study confirmed that industry structure and technology characteristics are important factors influencing the performance of technology-based start-ups. Technology-marketing strategy affects the performance of technology-based start-ups between industry structure and technology characteristics. According to additional analysis, moderating variables and technology-marketing strategy are important factors influencing the performance of technology-based start-ups under industry structure and technology characteristics. Broad type of technology-marketing strategy has more attractive industry structure and excellent technology characteristics than narrow types of technology-marketing.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.12
• /
• pp.1257-1263
• /
• 2011

This paper is dedicated to the study on the external and internal mass transfers of glucose for succinic acid fermentation under substrate and product inhibitions using a bioreactor with stirred bed of immobilized Actinobacillus succinogenes cells. By means of the substrate mass balance for a single particle of biocatalysts, considering the kinetic model adapted for both inhibitory effects, specific mathematical models were developed for describing the profiles of the substrate concentration in the outer and inner regions of biocatalysts and for estimating the substrate mass flows in the liquid boundary layer surrounding the particle and inside the particle. The values of the mass flows were significantly influenced by the internal diffusion velocity and rate of the biochemical reaction of substrate consumption. These cumulated influences led to the appearance of a biological inactive region near the particle center, its magnitude varying from 0 to 5.3% of the overall volume of particles.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.449-454
• /
• 2005

A waveguide method is developed to study the materials with relatively large dielectric constants at microwave range. Basically, the method is similar to the previous waveguide methods represented by short-circuit line and transmission/reflection measurement methods. However, the complex permittivity is not determined by the shift in resonance frequencies, but by numerical analysis of measured scattering parameters. In order to enhance microwave penetration into the specimen with relatively large permittivity, a dielectric plate with lower permittivity is employed for impedance matching. The influences of air gap between the specimen and waveguide wall are evaluated, and the corresponding errors are estimated. The propagation of higher order modes is also considered. Experimental results for several reference ceramics are presented.

• Geomechanics and Engineering
• /
• v.31 no.2
• /
• pp.183-195
• /
• 2022

Under the effects of the near-field earthquakes, the incident angle of the incoming wave could be different. In this study, the influences of some parameters such as incident angle, basin edge, peak ground acceleration level of the bedrock motion as well as different clay types with different consistency on the amplification behavior of the shallow basins are investigated. To attain this goal, the numerical analyses of the basins filled with three different clay types are performed using a fully nonlinear method. The two dimensional models of the basins are subjected to a set of strong ground motions with different peak ground acceleration levels and three different incident angles of 30◦, 45◦ and 90◦ with respect to the horizontal axes. The results show the dominant effect of the obliquely subjected waves at most cases. The higher effect of the 45◦ incident angle on the basin response was concluded. In the other part of this study, the spectral amplification curves of the surface points were compared. It was seen that the maximum spectral amplification of different surface points occurs at different periods. Also, it is affected by the increase in the peak acceleration level of the incoming motions.

• Journal of Korean Public Health Nursing
• /
• v.13 no.2
• /
• pp.84-100
• /
• 1999

Caring is the essential and universal concept of underlying nursing. Exactly how caring attributes relate to nurses' perception in the context of a contemporary technological environment have yet to be operationlized. In total. 560 Registered Nurses from 5 different university hospitals were involved in this study which aimed to : investigate technological influence and caring attributes as perceived by nurse. Data were obtained using Technological Influence Questionnaire (TIQ) and Caring Attributes Questionnaires(CAQ) which developed by Arthur et al(1999). Data were analyzed using SAS program for frequency. t-test. ANOVA and Tukey's Studentized Range test. and Pearson correlation coefficients. The results were as follows : 1) The mean score of TIQ was 48.84 and special unit nurses' TIQ was higher than that of general ward nurses. 2) The mean score of CAQ was 237.02 and it showed significant differences in the following variables : age. religion. educational background. marital status. career, and position. 3) With regard to the mean item score of CAQ by 3 perspectives : theoretical perspectives score was 3.76. practical perspectives score was 4.03, and pedagogical perspectives score was 3.84. 4) The correlation between TIQ score and CAQ score was slightly moderate (r=.35), The CAQ mean scsre was significantly different accordig to the level of TIQ meen score. The CAQ mean score was $247.19(\pm18.17)$ in high TIQ(>mean+1SD) group, $236.21(\pm19.71)$ In moderate $TIQ(between\;mean{\pm}1SD) $ group, and $228.47(\pm18.07)$ in low TIQ( (mean-1SD) group. In conclusion, nurses perceived the CAQ differently by several demographic characteristics which relating to age. religion, eduacational background. marital status. career. and position. This study provides an important message for administrators and nurse educators by highlighting factors which can be addressed by education programs. staff development and appraisal. Further research is necessary to improve and refine the Korean version of TIQ and CAQ instead of Arthur et al's scales directly to Korean nurses.

• Korea Journal of Hospital Management
• /
• v.14 no.4
• /
• pp.25-51
• /
• 2009

This model was empirically developed to test the effect of medical service quality and hospital's reputation on customer satisfaction, repurchase intention, and negative word of mouth as to disease severity. The model was tested in the context of the hospital industry. The findings are as follows. First, medical service provider's functional quality and technical service quality have significant effect on customer satisfaction. Second, hospital's reputation has positive(+) effect on customer satisfaction and significant negative effect on negative word of mouth. Third, customer satisfaction with medical service quality has significantly positive effect on customer's repurchase intention and has negative(-) effect on customer's negative word of mouth. Furthermore, customer's negative word of mouth has negative effect on their repurchase intention. Fourth, as to different disease severity, medical service quality and hospital's reputation have different effect on customer satisfaction, repurchase intention, and negative word of mouth. When patients get slightly ill, functional service quality and technical service quality have direct influence on customer satisfaction which has positive influence on repurchase intention and negative influence on negative word of mouth. Finally, negative word of mouth has negative effect on customer's repurchase intention. However, while hospital's reputation doesn't have effect on customer satisfaction, the reputation has significantly negative effect on negative word of mouth. When patients get seriously ill, only functional service quality has positive effect on customer satisfaction which influences on customer's repurchase intention and negatively influences on negative word of mouth. On the contrary, negative word of mouth doesn't influence on customer's repurchase intention as patients want to treat serious diseases in the large general hospitals even though negative word of mouth is known to them.

• Advances in aircraft and spacecraft science
• /
• v.10 no.1
• /
• pp.51-65
• /
• 2023

In this paper, the effect of deepness on in-plane free vibration behavior of a curved functionally graded (FG) nanobeam based on nonlocal elasticity theory has been investigated. Differential equations and boundary conditions have been developed based on Hamilton's principle. In order to figure out the size effect, nonlocal theory has been adopted. Properties of material vary in radial direction. By using Navier solution technique, the amount of natural frequencies has been obtained. Also, to take into account the deepness effect on vibrations, thickness to radius ratio has been considered. Differences percentage between results of cases in which deepness effect is included and excluded are obtained and influences of power-law exponent, nonlocal parameter and arc angle on these differences percentage are studied. Results show that arc angle and power law exponent parameters have the most influences on the amount of the differences percentage due to deepness effect. It has been observed that the inclusion of geometrical deep term and material distribution results in an increase in sensitivity of dimensionless natural frequency about variation of aforementioned parameters and a change in variation range of natural frequency. Finally, several numerical results of deep and shallow curved functionally graded nanobeams with different geometry dimensions are presented, which may serve as benchmark solutions for the future research in this field.