• 펄프종이기술
• /
• 제45권4호
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.16-25
• /
• 2014

This study was investigated in optimum condition of pulping of ramie and the mechanical properties of non-woven fabric for the performance of ramie/cotton panty liner. The result of pulping condition on ramie was most suitable for type I (mixed NaOH with $Na_2CO_3$ in 30%:70%). The sample (I) was showed yield value of 68.2% and the best fibrillation and lignin removal rate. The non-woven fabrics of ramie/cotton were made in range of ramie content of 0, 15 and 30%. As ramie content increased, so were increased in air permeability, compressive strength and compression recovery rate. But surface roughness and compressional energy were decreased. Therefore, the non-woven fabrics of ramie/cotton are very suitable in hygienic goods for female panty liner. The ramie panty liner showed a little decrease in absorption and strength, as increasing the amount of ramie. But the performance of ramie panty liner was appeared beyond standard values used by usual panty liner.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.42-50
• /
• 2005

Silk fabrics are widely used as high quality cloth, interior, quilting and bedding materials because of having excellent touch, drape, resilience and low specific gravity characteristics. But, many waste silk materials are produced during the reeling, spinning, weaving, dyeing and finishing processes. From this fact, the recycle of waste silks is interested in studying for the application of industrial textile materials such as filter, oil absorbent and wound protector. Thus, this research has surveyed the decolorizing and carding characteristics in order to recycle the colored waste silk materials. As the results, the carding condition of waste silk fabrics was optimized with different fiber lengths and curding passage. In addition, the fiber failure mechanism from the wasted silk microdamage caused by carding process was investigated. Also it was found that longitudinal and transverse cracks, abrasion and pilling were formed on the surface of wasted silk fibers.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.412-423
• /
• 2016

This paper explores the possibility, and suggests an experimental procedure, of industrial application of traditional textile design techniques, such as hand silkprinting and natural dyeing. Theoretical and traditional background of this study is William Morris and his followers' Arts and Crafts Movement from the late 19th century to the early 20th century, which laid the philosophical as well as technical foundations of modern textile design tradition. Based on the basic understanding of the design philosophy, and starting from the design techniques of Morris and his successors, I made some experimental and systematic color plans reflecting and exploiting the physical traits and structure of jacquard woven silk material fabrics. And I applied hand silkscreen printing techniques on the jacquard silk fabrics of my own making, while testing various color combinations of natural dyes. After finishing final processing of design samples, I could get textile design products which met the criteria of my original expectation, i.e., eco-friendly and aesthetic design samples that can also be produced in automatized mass production system of contemporary textile industry. The conclusion of this experimental study is that I can expect the natural dyeing techniques, jacquard silk fabrics design techniques, silkprinting techniques, and the basic processes used in this study to be safely applied for contemporary commercial textile industry utilizing automatized silkscreen printing system and digital printing devices.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.17-23
• /
• 2009

The influence of different forming elements on the local paper structure and the related paper properties was investigated in this study. Specifically, a conventional papermaking foil system and a velocity induced drainage (VID) system were compared. The study involved the analysis of the product samples obtained from the commercial machine trials. The paper samples produced with VID forming systems showed better formation. The deterministic patter in the local structural profile map of the Foil samples indicated the structure of foil samples was more supple after forming process and then easier to be marked by various fabrics such as wet pressing fabric. The higher bulk was observed in the VID samples, which resulted in higher scattering coefficient, lower ZDT strength, and higher bending stiffness.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.49-55
• /
• 2002

A new method is proposed for the on-line measurement of the fiber orientation of sheet materials. The measurement of fiber orientation is very important in manufacturing paper sheets, non-woven fabrics, and glass sheets, because fiber orientation strongly affects product properties represented by, for example, dimensional stability of paper. A method developed in this research utilizes anisotropy of dielectric constants of sheet materials as a key characteristic to determine the fiber orientation. The new on-line sensor, consisting of 5 microwave dielectric resonators set in different directions, was designed to detect the fiber orientation while paper is running with high speed on a paper machine. This sensor can determine the direction and the degree of fiber orientation from the measured direction of the maximal dielectric constant and its variation, respectively. The fundamental performance of this system was examined by the static measurement of printing grade paper, which gave a satisfactory result. Then, the dynamic measurements were done at a speed of 1,000 m/min by using a high-speed test-coating machine.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.27-35
• /
• 2013

Cotton linter pre-treatment methods using electron beam and sulfuric acid were investigated to prepare high quality regenerated fibers for fabrics. So far, NaOH was used to reduce the degree of polymerization (DP) of the cotton linter for ease of dissolving by cellulose solvent. Two pre-treatment methods were developed to reduce the consumption of the chemicals (NaOH) and to control the DP of cellulose more precisely. Changes in ${\alpha}$-cellulose contents and brightness by the pre-treatments were also important concerns. Both electron beam irradiation and sulfuric acid were shown to be effective on controlling the DP of cellulose and to reduce the chemical consumption, but reduced ${\alpha}$-cellulose contents as well in this study. Sulfuric acid pre-treatment, which needed additional washing process after the pre-treatment when comparing to the electron beam irradiation method, gave the highest brightness and the highest reduction of ${\alpha}$-cellulose content.

• 복식
• /
• 제58권4호
• /
• pp.99-112
• /
• 2008

The aim of the study was to look into the construction methods of historical corsetry and compare them with the construction methods of corsetry today. Through a comparative study, it was concluded that the design, material, sewing and functions of corsetry of a certain period are sum of the clothing techniques and fashion of the time. Corset was first appeared at the end of the 16th century. It has been through many changes in terms of items, materials, patterns, sewing methods in order to make right silhouettes of the time. Now corsetry has been developed into various items such as waist nipper, all-in-one, nipper bra, and girdle. All these items have a common purpose, that is to improve the body shape. The corsetry of the past was made of non stretchable materials, so they used to restrict body movements, and required individual fitting several times. Due to the development of thin durable stretchable fabrics, functional bones, and advanced sewing machines, construction methods of seam, hem and opening are simplified compare to their predecessors. Consequently corsetry became less weighted, easy to wear, easy to wash and easy to mass produce. Yet they have consistency in sewing techniques such as using bones or wires to support bodice shape, using durable twill fabrics over plain for attractive body shapes.

• 동굴
• /
• 제85호
• /
• pp.28-34
• /
• 2008

For trying to frontal attack of new solution by fusion of technical tasks and conditions with it's solving methods of the essential tasks of marine resource development and environmental conservation in addition with elements of electronic high-technologies, the magnetic oil spill adsorbent of Mag-Sorbent* has been prepared and proposed to dispose oil spill from the marine disaster for preventing oil pollution by using them and their system with sequentially circular collection of oil spill mag-sorbent powder and fabrics on the electronic equipment like as barge robot for the scheme of sustainable development of environment-friendly technology. Because of recent marine accident occurred at Tae-An cost and earthquake in Sichuan province were very large scale accident of disaster to prevent and manage of them. So, it was verified from the experiment of electronic demonstrator that the skimmer system of oil spill mag-sorbent powder and fabrics prepared was very effective and useful technique to collect oil spill samples on the water surface specially at the closed space of underground cave. At this point, the barge-based electronic remote control was very useful system operating easily on the marine fields but also water level at the small pool to skim it with the environment-friendly system of the disposing marine disaster and preventing oil pollution using magnetic adsorbents of Mag-Sorbent*.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.555-558
• /
• 2008

For trying to frontal attack of new solution by fusion of technical tasks and conditions with it's solving methods of the essential tasks of marine resource development and environmental conservation in addition with elements of electronic high-technologies, the skimmer robot was proposed by using of oil spill disaster prevention and its disposal system with sequentially circular collection type of magnetic oil spill adsorbent powder and fabrics on the electronic barge robot for the scheme of sustainable development of environment-friendly technology. It was verified from the experiment of electronic barge robot demonstrator that the skimmer system of magnetic oil spill adsorbent powder and fabrics was very effective and useful technique to collect oil spill samples. At this point, the barge-based electronic remote control was very useful system operating easily on the marine fields to skim oil spill with dangerous toxic substances of crude oil and very harmful to human. Therefore, fusion technology proposed in this study combined with electronic and marine technology is the novel contributable technology for developing marine environmental conservation and environment-friendly disaster prevention, and also its management techniques.