• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.292-298
• /
• 2010

Recently, with the beginning of the commercial operation of high-speed railway, there have been a number of changes in track structure fields. Also, it is expected that the development and introduction of new technology will be increased afterwards. However, it accompanies a lot of risk to install new track structures of which performance and safety are not verified on permanent ways with high traffic density. Therefore, to minimize the risk and enhance the adoption of new technology, it is required to develop a systemic verification system for track structure. To do this, in this paper, main contents of a draft of guidelines for track structure verification, and main issues in debate such as criteria and method for verification, test conditions and test periods are discussed. Also, a process to choose a most appropriate one for a specific project out of proven track structures by the above verification system, the selection process by the technical investigation committee and the VE process to analyze the economical and maintenance aspects based on LCC concept in Korea Rail Network Authority is introduced.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.62.1-62.1
• /
• 2010

GMTO(Giant Magellan Telescope Organization) 이사회(Board Meeting)는 GMT의 1세대관측기기 1차 선정을 하였다. 의향서(Letter of Intent)를 제출한 12개 기기 중 9개 기기에 대해 제안서를 받아 과학자문위원회(Science Advisory Committee)에서 과학적 측면(Science), 기술적 측면(Technical), 비용 및 작업범위측면(Cost, scope & management)에서 심사한 결과 6개를 추천하였고 이사회에서 이를 승인하였다. 한국이 참여하는 GMTNIRS를 포함하여 G-CLEF, GMACS, GMTIFS, NIRMOS, TIGER가 선정되었다. 이 기기들은 2010년 4월부터 14개월 동안의 Conceptual Design Study를 거쳐 2011년 하반기에 이중에서 다시 3~4개가 GMT 1세대 관측기기로 최종 선정되어 제작될 예정이다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.35-40
• /
• 2006

Ultrasonic cold forging technology (UCFT) utilizing ultrasonic vibration energy is a method to induce severe plastic deformation to a material surface, therefore the structure of the material surface becomes a nano-crystal structure from the surface to a certain depth. It improves the mechanical properties; hardness, compressive residual stress, wear and fatigue characteristics. Applying UCFT to a rolling process in the steel industry is introduced in this study. First, the UCFT specimens of a tool steel (SKD-61/equivalent H13) are prepared and tested to verify the effects of the UCFT in a variety of mechanical properties, the UCFT is applied to the trimming knives in a cold rolling process. It has been determined that UCFT improves the mechanical properties effectively and becomes a practical method to improve productivity and reliability by about two times compared with the conventionally treated tooling in the trimming process in a cold rolling line.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.261-264
• /
• 2006

This paper deal with development of dredging equipment that proper water head elimination method changing transitional dredging method. Numerical simulation and model test were accomplished for development of seabed sediment inhalation equipment using water head. Sediment elimination system by the difference of water head has been analysed by numerical method. Model test was achieved for inhalation equipment performance test using water head by primary design. Also sediment elimination system has designed and developed that doesn't occur secondary pollution phenomenon. To verify the numerical results are compared with experimental results.

• KCID journal
• /
• v.17 no.2
• /
• pp.35-41
• /
• 2010

For efficient water quality management of Saemangeum lake, it is very important to accurately analyze discharged load characteristics using investigated pollution sources data from Saemangeum watershed. Investigation of pollution sources was conducted from 2003 to 2007. In this study, pollution sources are largely classified into human population, livestock, industry, and land use. Discharged loads of BOD, T-N and T-P from classified pollution sources were calculated by Korea TMDL (Total Maximum Daily Load) technical guideline. The calculated results showed that the major sources of BOD and T-N were land use, human population, livestock, and industry in order. However, the major sources of T-P were livestock, land use, human population, and industry in order. Our results clearly show that pollution sources of the priority management for water quality enhancement in the Saemangeum lake has represented land use and livestock.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.81-87
• /
• 2016

Recently, as the heterogeneous network (HetNet) has been deployed widely to support various kinds of Radio Access Networks(RANs) with a combination of Macro, Pico, and/or Femto cells, research and standardization efforts have been very active regarding the concept of Licensed Shared Access (LSA) for supporting spectrum sharing. In order for a mobile device to efficiently support the spectrum sharing, the mobile device shall be reconfigurable, meaning that its radio application code has to be adaptively changed in accordance with the hopping of desired spectral band. Especially, Working Group 2 (WG2) of Technical Committee (TC) Reconfigurable Radio System (RRS) of European Telecommunications Standards Institute (ETSI) has been a main driving force for developing standard architecture for Multi-mode Mobile Device (MD) that can be applied to the LSA system. In this paper, we introduce the Multi-mode MD architecture for supporting LSA-based spectrum sharing. An implementation of a test-bed of Multi-mode MD is presented in order to verify the feasibility of the standard MD architecture for the purpose of LSA-based spectrum sharing through various experimental tests.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.64-69
• /
• 2012

Head injury is one of the most common cause of deaths in car-to-pedestrian collisions. To reduce the severity of such injuries, many international safety committees have performed headform impact test for pedestrian protection. In this paper, an adult headform impactor model is developed based on the finite element (FE) method and validated through the numerical simulation. The skin material of headform impactor is known as polyvinyl chloride skin (PVC) and its material was assumed as viscoelastic. The viscoelastic parameters of headform skin are identified by a series of trial and error methods. The new developed FE adult headform impactor is verified by the drop test and FE JARI adult headform impactor provided by Madymo program.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2016

In this paper, we propose a technique that can be mapped to the most appropriate type of health patterns, depending on the health status of health promotion measures to establish a body mass index (BMI). When used as a mapping scheme proposed in this paper it is possible to contribute to effective healthcare and health promotion. BMI is widely used as a simple way to assess obesity because body fat increases the status and relevance. Despite normal weight determined by this and because of the social atmosphere has increased prefer the skinny tend to try to excessive weight loss. Since health can affect the health maintenance and promotion of the rest of your life, depending on whether and how much weight perception and health can be considered as very important. Therefore, this paper identifies the differences in perception and in this respect for the body mass index (BMI). And physical, mental and map the appropriate type of pattern in the relationship between body mass index (BMI) in order to facilitate the social and health conditions. Proposal to give such a mapping technique provides the opportunity to increase the efficiency of health care and health promotion.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.35-43
• /
• 2008

This study analyzes the present state of disaster management system in Korea and the international standardization trend of disaster management systems in advanced nations. ISO has developed international disaster management standards in ISO/TC 223 Societal Security Technical Committee, and the advanced nations such as U.S.A., U.K. and Japan are in competition with each others to reflect their national disaster management standards in international standardization. Each disaster management organization in Korea separately carries on the disaster management standardization and activities because national standards for the disaster management is not established yet. The national standardization efforts for disaster management system have to be executed in Korea to raise efficiency in disaster management activities and to cope with the international standardization of disaster management.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.254-259
• /
• 2001

There are advantages in the installation of dual subsea pipelines over two separate single lines. In many case it can reduce the cost for trench, back-filling and installation. However the installation of dual pipelines often requires technical challenges. Dual Pipelines should be placed to be stable to external loading not only during the installation but also in the design life. Dual pipelines in trench can reduce the influence of external forces. To investigate applied forces as slope changes, number of experiments are conducted with PIV (Particle Image Velocimetry) in a circulating water channel. Numerical approaches are also made to compare with experimental results. The velocity fields around dual pipelines in trench are investigated and analysed. Comparison of both results show similar pattern of flow around dual pipelines. it is proved that the trench slope affects the pipeline stability significantly. The results can be applied in the stability design of dual pipelines in trench section. The complex flow patterns can be referenced effectively linked in the understanding of fluid around circular bodies in trench.