• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.29-34
• /
• 2006

In this paper, the mechanical characteristics of ultrasonic cold forged technology (UCFT) used for the trimming knife and the effects of ultrasonic vibration energy (UVE) into the trimming process on the state of the strip cutting face were studied. And a diagnosis system to quality control for trimming knife and strip cutting face was developed and installed in plant. By the plant application of UCFT, service life of knife was more increased over 100% than that of conventional knife. And using the developed diagnosis system, the knife breakage and saw ear have been perfectly detected and quality control of trimming face is obtained effectively.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1293-1297
• /
• 2015

This paper introduces the insulation coordination study results for UHV AC systems which was performed by CIGRE working group. The study results will be discussed within IEC technical committee in order to amend the IEC Insulation Coordination 60071-1 Ed. 8 2010 and 60071-2 Ed. 3, 1996. This paper includes the insulation coordination of transformer, gas insulated switchgear, metal oxide arresters and clearances of transmission towers. This article also illustrates the overvoltage specific to UHV systems such as TOV(temporary overvoltage), switching overvoltage, lightning overvoltage and VFTO(very fast transient overvoltage).

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.886-891
• /
• 2005

This study aims to provide divers with improved safe diving practices by analyzing reports on scuba diving casualties that recently occured in Korea, Japan and USA. The result of this study should be notified to all the divers in Korea for the purpose of preventing the diving accident. All the data were collected through the diving accident reports of various sourses, which include KUA(Korea Underwater Association) technical committee, the accident statistical data of National Maritime Police Agency, articles of domestic and foreign scuba diving magazine, accident reports of various newspaper, annual report on decompression illness and diving fatalities by DAN(Diver Alert Network), various type of data on diving accident from local as well as national seminars, and medical treatment data of diving accident.

• The Journal of Korea Robotics Society
• /
• v.2 no.2
• /
• pp.196-204
• /
• 2007

In this paper, we are looking for requirements of software, hardware and application for use in network-based robots and also directions in building standardization and research activities by reviewing technical status of the robot industries developing robots. The questions are including awareness of RUPI(Robot Unifies Platform Initiative) activities, target market and applications, hardware specifications, software development technologies, and HRI(Human Robot Interaction). The RUPI committee creates standard and drives implementation software for network-based robots through industrial requirements as like of the results. Many robots have been developed and launched services based on RUPI 1.0 standards. Based on this achievement we are expanding RUPI standard to include thin and thick client robots. The results also show that which one is important and urgent technology in the sense of industrial robotic business.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.218-223
• /
• 2003

UDDI is the open standard for distributed Web-based registry standard which supports registrations and discoveries of Web services. Recently, UDDI version 3.0 specifications were opened by OASIS UDDI Spec, technical committee. UDDI version 3.0 supports many useful functions, which are not supported in version 2.0 specification, such as nested query, enhanced find qualifiers, digital signatures subscription, etc. Despite of its merits, complexity of the standard and backward-compatibility support makes it difficult to adopt this standard in real application domains. In this paper, we develop the Registry server which support UDDI version 3.0 standard. This server is based on common RDBMS and it supports all functions of UDDI version 3.0 including backward-compatibility with version 2.0 API, XML digital signature and URI- based key schemes.

• International Journal of High-Rise Buildings
• /
• v.2 no.4
• /
• pp.323-330
• /
• 2013

The ASHRAE Technical Committee for Tall Buildings, TC 9.12, has defined a tall building as one whose height is greater than 300 feet (91m). Since the publication of the HVAC Design Guide for Tall Commercial Buildings in 2004, there were only about 300 buildings taller than 200 meters; this number has risen to 600 in 2010 and the prediction 765 buildings taller than 200 meters in 2012. There has also been an introduction of two new classes of tall buildings: ${\bullet}$ Mega tall, which are buildings taller than 300 m, and ${\bullet}$ Super tall, which are buildings taller than 600 m. The effect of ambient air temperature over the height of buildings, especially Mega tall and Super tall buildings. The ambient climatic conditions vary with altitude and these changes in ambient conditions can seriously affect load calculations and performance of super and mega tall buildings. This paper presents revised calculations for stack effect for Tall, Mega Tall and Super tall Buildings.

• 수도
• /
• v.24 no.5 s.86
• /
• pp.5-15
• /
• 1997

This year the Ministry of Environment(MOE) made a fifth amendment to the Sewerage Act, which was enacted in August 1966. The first objective of this amendment is to introduce small public sewerage system that is designed to treat wastewater produced in rural areas. Before small public sewerage system was introduced to the Act through this amendment, only urban areas were covered by public sewerage system. Because small sewerage system was introduced, wastewater generated in urban areas as well as rural areas can now be treated by public sewage treatment plants. In addition to this, some authorities on sewerage affairs were moved from the MOE to local governments by this amendment in order to enhance the power and responsibility of local governments in relation to sewerage affairs. Also, this amendment enabled local governments to entrust the authority to establish and manage sewage treatment plants to private companies, and enabled the MOE to organize an advisory committee on sewerage to review economic and technical aspects ofsewage treatment plants. This amendment went into effect September 8, 1997.

• Annals of Clinical Neurophysiology
• /
• v.20 no.1
• /
• pp.18-25
• /
• 2018

Evoked potentials (EPs) measures the electrophysiologic responses of the nervous system to variety of stimuli. In clinical practice, only a few are used on a routine basis. Because of the small amplitude of EPs recorded by noninvasive methods, computer summation or averaging generally is necessary to resolve them from background noise. Therefore, waveform acquisition under good condition according to standard method is important. We aimed to provide the standards for clinical EP equipment, technical consideration and minimal requirements for obtaining good clinical EP waveforms, and general criteria for writing EP reports in practice as Korean guidelines.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.83-86
• /
• 2001

This paper aims to make a feasibility study and to propose a master plan for the development of "integrated ocean energy utilization system", which utilizes various renewable ocean energies. Fossils energy, as the most important energy resources which are inevitable for the living and industrial development, becomes exhausted and its consumption creates serious environmental problem. It is important to utilize renewable ocean energy for a sustainable and environmentally friendly development. We survey the integrated utilization of ocean energy based on surveyed energy density distribution and propose concepts of integrated ocean energy utilization plant for both onshore and offshore system. The results of this study can support national effort for renewable energy development utilizing integrated ocean energy and refer as a guideline for the technical development of sustainable integrated ocean energy.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.53-59
• /
• 2001

In this Paper, the resistance performances of twin hull forms, which are simplified as two-dimensional wedge shape, are experimentally investigated in low and middle speed ranges to find out the effect of distance between two hulls and fore-body shape for the future hull form development of catamaran type sweeping vessel. The model tests are performed for seven different cases for three models in the circulating water channel(CWC) of Inha Technical College. The free surface flows are observed together to investigate the relation between resistance performance and free surface characteristics. A conceptual design for the modification of bow hull form is presented and the efficiency is discussed.