• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.390-399
• /
• 2015

This study was conducted to examine the potential use of coffee waste (CW) as an adsorbent of HCHO by adding into fiberboard. For the purpose, CW treated with various temperatures and times was placed in desiccator with a HCHO solution and then the HCHO adsorptivity of the CW was measured by acetylacetone (ATAN) and DNPH methods. In the results of ATAN analysis, amount of HCHO adsorbed in distilled water was the lowest on the non-treated CW and steadily increased to $100^{\circ}C$-treated temperature. However, over the $100^{\circ}C$, heating temperature (H-Temp) had not an effect on the HCHO adsorptivity of CW. Amount of HCHO adsorbed on CW itself was the highest at $100^{\circ}C$ H-Temp, following by $50^{\circ}C$, $150^{\circ}C$, $0^{\circ}C$, $250^{\circ}C$ and $200^{\circ}C$. For the HCHO adsorptivity of CW measured by DNPH methods, HCHO was not detected in the distilled water stirred with non-treated CW, but detected from the distilled water stirred with heating-treated CW. The content was the highest in the CW heating-treated at $100^{\circ}C$ for 10 min. In addition, HCHO adsorbed on CW itself increased to the H-Temp of $100^{\circ}C$ regardless of heating time, but decreased or reduced greatly degree of the increase over $100^{\circ}C$ H-Temp. In conclusion, optimal heating conditions of CW for the HCHO adsorption might be H-Temp between 100 and $150^{\circ}C$ with 10 min according as technical and economical reasons. Heating-treated CW manufactured with above the conditions can be used as an adsorbent in conventional fiberboard production for reducing HCHO emssion.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.173-178
• /
• 2010

A privately held, third generation family owned company, Boom Technologies, Inc. (BTI), a provider of products and services to the electric utility, telecommunications and contractor markets, continues to make progress in exporting. Although export sales only equaled 5% of total revenue in 2008, BTI has an entire export division. Their export division's Managing Director reveals the trial and errors of a privately held company and their quest for success overseas. From its inception, BTI has always believed its greatest asset is its employees. When export sales struggled due to lack of strategy and direction, BTI hired a Managing Director for its export division. With leadership and guidance from BTI's president and from the Managing Director, they utilized the department's skills and knowledge. Structural changes were made to expand their market presence abroad and increase export sales. As a result, export sales increased four-fold, area managers in new countries were added and distribution networks were successfully cultivated. At times, revenue generation was difficult to determine due to the structure of the company. Therefore, in 1996, the export division was restructured as a limited liability company. This allowed the company to improve the tracking of revenue and expenses. Originally, 80% of BTI's export sales came from two countries; therefore, the initial approach to selling overseas was not reaching their anticipated goals of expanding their foreign market presence. However, changes were made and now the company manages the details of selling to over 80 countries. There were three major export expansion challenges noted by the Managing Director: 1. Product and Shipping - The major obstacle for BTI was product assembly. Originally, the majority of the product was assembled in the United States, which increased shipping and packaging costs. With so many parts specified in the order, many times the order would arrive with parts missing. The missing parts could equate to tens of thousands of dollars. Shipping these missing parts separately in another shipment also cost tens of thousands of dollar, plus a delivery delay time of six to eight weeks; all of which came out of the BTI's pockets. 2. Product Adaptation - Safety and product standards varied widely for each of the 80 countries to which BTI exported. Weights, special licenses, product specification requirements, measurement systems, and truck stability can all differ from country to country and can serve as a type of barrier to entry, making it difficult to adapt products accordingly. Technical and safety standards are barriers that serve as a type of protection for the local industry and can stand in the way of successfully pursuing foreign markets. 3. Marketing Challenges - The importance of distribution creates many challenges for BTI as they attempt to determine how each country prefers to operate with regard to their distribution systems. Some countries have competition from a small competitor that only produces one competing product; whereas BTI manufactures over 100 products. Marketing material is another concern for BTI as they attempt to push marketing costs to the distributors. Adapting the marketing material can be costly in terms of translation and cultural differences. In addition, the size of paper in the United States differs from those in some countries, causing many problems when attempting to copy the same layout and With distribution being one of several challenges for BTI, the company claims their distribution network is one of their competitive advantages, as the location and names of their distributors are not revealed. In addition, BTI rotates two offerings yearly: training to their distributors one year and then the next is a distributor's meeting. With a focus on product and shipping, product adaptation, and marketing challenges, the intricacies of selling overseas takes time and patience. Another competitive advantage noted is BTI's cradle to grave strategy, where they follow the product from sale to its final resting place, whether the truck is leased or purchased new or used. They also offer service and maintenance plans with a detailed cost analysis provided to the company prior to purchasing or leasing the product. Expanding abroad will always create challenges for a company. As the Managing Director stated, "If you don't have patience (in the export business), you better do something else." Knowing how to adapt quickly provides BTI with the skills necessary to adjust to the changing needs of each country and its own unique challenges, allowing them to remain competitive.

• Journal of Chest Surgery
• /
• v.32 no.6
• /
• pp.536-542
• /
• 1999

Background: The purpose of this study is to improve the quality of the diagnostic procedures in the preoperative evaluation so as to reduce the unnecessary thoracotomy and to ensure resectability in non-small cell lung cancer. Material and Method: Of 616 patients who underwent thoracotomy for primary lung cancer from January 1990 to December 1996, 59 patients(9.6%) turned out to have inoperable lesions after the thoracotomy. We reprospectively reviewed the bronchoscopic findings, methods of tissue diagnosis, CT scans, pulmonary function test and lung perfusion scan, reasons for nonresectability, and adjuvant therapy, and then followed up on the survival rate after exploratory thoracotomy. Result: The cell types were squamous cell carcinoma in 38, adenocarcinoma in 15, large cell carcinoma in 3 and others in 3. Primary loci were RUL in 20, RML in 6, RLL in 8, LUL in 13, LLL in 4 and others in 8. The reasons for non-resectability were various; direct tumor invaison to mediastinal structures(n=41), seeding on pleural cavity(n=8), poor pulmonary function(n=2), invasions to extranodal mediastinal lymph node(n=2), technical non- resectability due to extensive chest wall invasion (n=3), small cell carcinoma (n=1), malignant lymphoma(n=1), and multiple rib metastases(n=1). In the follow-up of 58 patients, 1-year survival rate was 55.2% and 2-year survival rate was 17.2% and the mean survival time was 14 months. When compared according to cell types or postoperative adjuvant therapeutic modalities, no significant difference in the survival rates were found. The squamous cell carcinoma was frequently accompanied by local extension to contiguous structures and was the main cause of non-resectability. In adenocarcinoma, pleural seeding with malignant effusion was frequently encountered, and was the major reason for non-resectability. Conclusion: These data revealed that if appropriate preoperative diagnostic tools had been available, many unnecessary thoracotomies could have been avoided. Both the use of thoracoscopy in selected cases of adenocarcinoma and the more aggressive surgical approach to the locally advanced tumor could reduce the incidence of unnecessary thoracotomies for non-small cell lung cancers.

• Journal of the HCI Society of Korea
• /
• v.11 no.1
• /
• pp.47-55
• /
• 2016

Three Dimensional Printing (herein, 3D printing) not only gives novelty and interests to modern people but is also a spotlighted technology that could herald a new industrial revolution. The introduction of various 3D printing service platforms has enabled individuals to easily possess products designed through 3D printing. However, there are still many issues to consider until the era of new manufacturing, when 3D printing becomes available to the general public so that anyone can make and design products with 3D printing. For instance, there needs to be sufficient consideration and research on whether the current 3D printing services can prove their higher capability to produce products conventionally done by machines and hands through 3D printing, and on the meaning of selling a wide range of product families like those of most 3D printing service platforms to the consumers. This study, which was initiated in this context, aimed to gain insight on the directions that 3D printing services need to advance going forward by letting consumers have first-hand experience on 3D printing online service platforms with a wide range of product families and those with relatively limited services, and then asking them to answer multiple-choice and short-answer survey questions on the websites they wish to purchase from, diversity of designs, design satisfaction, perceived technical skills, perceived purchase satisfaction, perceived after-sales service(A/S). As a result, we were able to witness that consumers generally had a strong preference for services with a wide range of product families (e.g. Shapeways) compared to services with a narrow range (e.g. Digital Forming). We also verified that design diversity and the possibility of realizing the designs were the crucial aspects that need to be considered with 3D printing services. Moreover, we also carried out discussions on carrying out design consulting by securing a pool of designers from diverse fields, on providing web-based designing software that can be utilized even by beginners, and on operating shops both online and offline in order to provide more competitive 3D printing services.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.665-673
• /
• 2011

In order to estimate the hydrocarbon reserves, the porosity of the reservoir must be determined. The porosity of the area without a well is generally calculated by extrapolating the porosity logs measured at wells. However, if not only well logs but also seismic data exist on the same site, the more accurate pseudo porosity log can be obtained through artificial neural network technique by extracting the relations between the seismic data and well logs at the site. In this study, we have developed a module which creates pseudo porosity logs by using the polynomial neural network method. In order to obtain more accurate pseudo porosity logs, we selected the seismic attributes which have high correlation values in the correlation analysis between the seismic attributes and the porosity logs. Through the training procedure between selected seismic attributes and well logs, our module produces the correlation weights which can be used to generate the pseudo porosity log in the well free area. To verify the reliability and the applicability of the developed module, we have applied the module to the field data acquired from F3 Block in the North Sea and compared the results to those from the probabilistic neural network method in a commercial program. We could confirm the reliability of our module because both results showed similar trend. Moreover, since the pseudo porosity logs from polynomial neural network method are closer to the true porosity logs at the wells than those from probabilistic method, we concluded that the polynomial neural network method is effective for the data sets with insufficient wells such as F3 Block in the North Sea.

• Journal of Korean Public Health Nursing
• /
• v.3 no.1
• /
• pp.74-100
• /
• 1989

Inspite of the lots of studies on the harmfulness of cigarette smoking to the body published by many researchers since 1950, cigarette smoking people are increasing in number especially, cigarette smoking by young and women causes a serious problem. Examining the physiological motives of youth shows that, impulse which the youth want to immitate the adults, alluring curiousity, and defiant physiology of escaping from the norm of traditional groups which has been banned are cooperated well compoundly. As the period of the youth is the one which they accumulate knowledge and charactor by learning as well as the period of growth mentally, and physically they should be rightly educated about smoking before they addicted to smoking and it is desirable for us to make the youth to understand how harmfully the smoking is to effect to their growth and mental soundness simply not as a social norm which they should not smoke. The main motive of this study on the attitude of smoking by the youth is to give basic materials related on this field. For this study, 647 questionnaires were used as studying material which were able to analyze among 720 questionnaires of 2 classes of each grade of 3 high schools among the high schools of boys, girls and co-educated in Seoul from Oct. 21, 1988 through Oct. 26, 1988. Study Instrument are graded in Likert's 5 point from 40 questions which are 20 questions m affirmations and 20 questions in negations after analyzing the factors on 60 simple sentence questions which the students showed in preliminary studies. And these are systemized to be measured from 1 point which means they think smoking IS very bad to 5points which means they think smoking is really good. In these collected materials, technical statistics of frequency. percentage, average, standard deviation are used for general character and smoking attitude, $X^2-test$ for examinning Independant variables of physical. emotional, ethical and other areas pearson's coefficient of correlation for related direction and degree" and step­regression analysis for the degree of relative contribution of all variables which effect smoking attitude. The results of this study are as follows; 1. The smoking attitude of high school boys and girls showed average of 1.78 in physical area, 2.63 in emotional area, 2.61 in ethical area, 2.29 in other area respectively in a negative attitude generally also the negative attitude are expressed most strongly in physical area. I've can also say by this results that smoking is harmful to their health and further more it can be judged that this proves the youth in the period of preparation be adults have a strong curiousity in the emotional, ethical and other areas. 2. The most influential variables in each field as related factors effecting smoking attitude of the student can be explained from 13.2 in physical area the lowest experienced variables to 25.2 in emotional area the highest of degree of smoking experience. The fact that the more the smoking experienced students are increasing in number the higher tendency which accept the' smoking tells as the importance of health education about the population of latest student's smoking as important variables shown equally in each area. Those of grade, age, numbers of smoking people in house are showed meaningful in pure interrelation. Those related to the acceptance of teacher's smoking, sex, mothors education are shown meaningful in opposite interrelations. This means that the' increasing number' of smoking people in grade age, the number of smoker in family have a affirmative attitude. And people who are not interested in teacher's smoking wants to quit it, and whose mother's education is higher have a negative attitude. 3. The most negatively answered questions of the smoking attitude In physical, emotional, ethical and other areas are as belows; Firstly too much smoking is harmful to our health is 1.12 point. Secondly smoking have a ill-effect on pregnancy and embryo is 1.13 point. Thirdly smoking is harmful· to our health is 1.27 point. Fourthly smoking in crowed area with the people such as In a bus or subway should be prohibited is 1.27point. Fifthly smoking can ruin lungs is 1.31 point. And the most affirmatively answered questions are also as below; Firstly we showed smoke depending on time and place is 3.96 points. Secondly smoking is just habit is 3.83 points. Thirdly smoking people seem to be unable and deplorable is 3.69 point. Fourthly smoking should be prohibited by law is 3.56 points. Fifthly high school student's smoking is immitation of adults is 3.52 points.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.2
• /
• pp.181-188
• /
• 1989

The present study has been carried out to investigate the effect of Bactokil(made from didecyldimethyl ammonium chloride isopropanol and water) and Taipet-F (made from natural vitamin E, L-ascorbic acid, glyceride and gallic acid) on retarding lipid oxidation in boiled-dried anchovy. To process boiled-dried anchovy, boiled anchovy dried in cabinet drier $(dry-bulb\;temperature\;40^{\circ}C)$ for 1 hour were fronted with the Bactokil, the Taipet-F and mixture of Bactokil and Taipet-F, respectively. Anchovy fronted with chemicals were redried for 8 hours, packed in polyethylene film bag, and then stored at room temperature $(24{\pm}3^{\circ}C)$. These products were compared with control(untreated with chemicals) during storage. The changes in volatile basic nitrogen of each product was negligible during storage. The thiobarbituric acid and peroxide values of each product increased up to 10 days of storage, and then decreased. In color value of each product, L value increased, while n, b and ${\bigtriangleup}E$ values decreased during storage. The changes in brown pigment formation of each product increased up to final stage of storage. From the results of chemical analysis and sensory evaluation, the product treated with Taipet-F(0.5%, v/v) was the most effective on retarding lipid oxidation of the boiled -dried anchovy, followed by the product treated withthe mixture of Bactokil (0.04%, v/v) and Taipet-F (0.5%, v/v), the product treated with Bactokil(0.04%, v/v) and control, in the order named.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.1-21
• /
• 1974

A considerable change of the Korean nursing system has been made during the last decade not only in its philosophy but also in its function and structure to meet political and scientific need of the modern society. The main purpose of this study is to develope the new concept of comprehensive nursing care, both its Philosophy and ethics, as the basic of modern clinical nursing theory and practice. Comprehensive nursing care is the concept of human centered nursing care, and it helps a man to meet the basic physical, psychological, environmental, socioeconomic and teaching needs. It also helps him to help himself to meet these needs. This concept starts from the individualized nursing care and its ultimate goal is to improve a man to have a better position in his own community so that he may able to have a meaningful life. To accomplish this goal, an individualized nursing care plan as a nursing diagnosis and problem solving method should be set up for different patients with similar diagnosis to meet their needs, because each patient has a different social background. from this viewpoint, nursing is a science as well as abstruse humanity. The performance of comprehensive nursing care is a goal and issue of modern clinical nursing care. If nursing is a science and a profession for man, it should have ethics which recognize the dignity of man and offers infinite service voluntarily, and should be able to show leadership in carrying out the nursing responsibility. This leadership finds a person's potential and encourages him to utilize it. Such concepts should develop into a nursing ideology and this ideology should become a priority in comprehensive nursing care. The following statements are the conclusion of this study. 1) Modern nursing has been developed from disease centered nursing care to comprehensive nursing care based on humanity. The primary principle of nursing was to assist in the treatment of disease, but it has been changed to the professional nursing system independently. 2) The concept of nursing is one of continuous or endless scope of dispersion. It proves that nursing is grasping the professional responsibility to be able to coordinate scientific principles Patient health problems are according to scientific principles rather than adhering to nursing technical discipline as a daily work. 3) In chapter I and Ⅱ, the philosophy and ideology of nursing have been discussed and the flow of concept of clinical nursing and the rate of progress which emerges from naturalizing performance of the concept of comprehensive nursing in clinical nursing studied. The discussion developed the theory that a nurse should be to embody nursing ideas and objectives by establishing definite conviction of professions and study. 4) In chapter lil, nursing planning based on nursing diagnosis as a method to attain ideal nursing care for humanity with a definite idea of establishing philosophy of nursing was presented. 5) From the result of survey on patient needs about treatment and nursing, it was observed that all patient had emotional stress from unknown factors. Therefore it was concluded that nurses should not only educate the patient but also give them the opportunity to communicate freely their needs and anxieties. Furthermore complaints and doubts of the patient should be carefully noted and must be considered to meet these needs. 6) Patient teaching is the most important part of comprehensive nursing care. In chapter, Ⅲ, the important of patient teaching was emphasized by demonstrating the effect of patient teaching for diabetic patient. 7) In Chapter Ⅳ, from the result of the study on nurses attitudes to comprehensive nursing care, it was pointed that the evolution of nursing education and the establishment of a complete concept and value of comprehensive nursing was necessary.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.1
• /
• pp.44-50
• /
• 2013

The persons in charge of management request diagnosis and prescription to tree hospitals in order to get consultation about the problems like blight that occur in landscape tree management. This study aims to analyze what the main problems and questions raised by landscape gardeners are and those concerned in landscape tree management. This is done by investigating landscape tree-related questions and answers uploaded on the online consultation boards of the plant diagnostic centers approved in Korea including the Seoul National University Plant Clinic, the Chungbuk National University Plant Hospital, and the Kangwon Diagnostic Center. As a result, those concerned in landscape occupied the most as 81.4% among the questioners. However, only 11.5% did explain the plant management history or surrounding environment, which is essential for landscape tree diagnosis when asking questions. This shows that those concerned in landscape lack basic knowledge or interest about plant diagnosis. Among 263 questions about landscape trees, questions about physiological damage included 94 cases that were the most taking up 35.8%. Moreover, the next were damage by insects and damage by disease in order. It is thought that due to the characteristics of physiological problems that occur by various sorts of stress and with no signs, they tend to request diagnosis or prescription the most. The most frequent reasons for physiological damage are water stress and temperature stress. About damage by disease, there exist many types of diseases, and there are many complex damages accompanied by physiological causes. About damage by insects, the most common include damage by moths. In consideration of this result, universities or technician training centers should provide education for landscape tree management so that landscape technicians and students can acquire essential knowledge and information about landscape tree management and increase their interest in it. In particular, it is necessary to provide profound learning opportunities for plant physiology, and the technicians should make efforts themselves. In addition, it is needed to build organizations to which they can ask technical questions about landscape planting and management in order to understand landscape industry in general and the actual status of landscape planting technique and the actual field. Moreover, to elevate systemicity and expertise in the area of landscape tree management not yet equipped with the foundation, it is needed to cultivate the technicians intensively and conduct research by those concerned both in academic and industrial circles.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.69-96
• /
• 1991

Economic circumstances of enterprise began to change after a series of democratization measures in 1987. Accompanied with it, competitive advantage of enterprise began to change as well. By that time Korean enterprises had a competitive advantage based on low wages of labor. Abrupt and steady upsurge in wage, however, weakened competitive advantage based on low wages, upward revaluation of won currency caused by surplus in BOP strengthened upward trend in price increase of export products. An urgent problem in Korea economy is, therefore, to find 'new' competitive advantage. For the time being preserving competitiveness based on cost advantage must inevitably remain our basic strategy in industrial policy. While cost advantage in the past referred to low wage level, this cost advantage must have foundation on the improvment in producing technology, which will increase labor productivity and decrease unit cost of products. Besides, other measure to improve competitiveness can be considered such as increasing the extent of production automation, self-development of new products, and spread and strengthening subcontracting system among various enterprises. In this paper we tried to perceive how subcontracting system as a form of intercompany division of labor operates and to which direction this system proceeds responding to the recent changes in economic circumstances. Speaking more concretly, we tried to perceive how large the gap of bargaining power between mother-company and subcontracting company is and how effectively subcontracting company's technical power contributes to mother-company. Facing up to weakeening of competitiveness, how stably is the partnership between mother-company and subcontracting company established and what measures are being prepared to retore the weakened competitiveness. In conclusion the result of investigation through the questionaire on subcontracting system is positive, from which we can infer the optimistic view of restoring Korean economy's competitiveness.