• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.371-372
• /
• 2012

We have studied lead-based gapless semiconductors, $PbPdO_2$, which is very sensitive to external parameters such as temperature, pressure, electric field, etc[1]. We have fabricated pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films using the pulsed laser deposition. Because of the volatile element of Pb, it is very difficult to grow the films. Note that in case of $MgB_2$, Mg is also volatile element. So in order to enhance the quality of $MgB_2$, some experiments are carried out in annealing with Mg-rich atmosphere [2]. This annealing process with volatile element plays an important role in making smooth surface. Thus, we applied such process to our studies of $PbPdO_2$ thin films. As a result, we found the optimal condition of ex-situ annealing temperature ${\sim}650^{\circ}C$ and time ~12 hrs. The ex-situ annealing brought the extreme change of surface morphology of thin films. After ex-situ annealing with PbO-rich atmosphere, the grain size of thin film was almost 100 times enlarged for all the thin films and also the PbO impurity phase was smeared out. And from X-ray diffraction measurements, we determined highly crystallized phases after annealing. So, we measured electrical and magnetic properties. Because of reduced grain boundary, the resistivity of ex-situ annealed samples changed smaller than no ex-situ sample. And the carrier densities of thin films were decreased with ex-situ annealing time. In this case, oxygen vacancies were removed by ex-situ annealing. Furthermore, we will discuss the transport and magnetic properties in pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films in detail.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.123-127
• /
• 2013

The electrolytic reduction of a spent oxide fuel involves liberation of the oxygen in a molten LiCl electrolyte, which is a chemically aggressive environment that is too crosive for typical structural materials. Therefore, it is essential to choose the optimum material for the process equipment for handling a molten salt. In this study, the corrosion behavior of pyro-carbon made by CVD was investigated in a molten LiCl-$Li_2O$ salt under an oxidation atmosphere at $650^{\circ}C$ and $750^{\circ}C$ for 72 hours. Pyro-carbon showed no chemical reactions with the molten salt because of its low wettability between pyro-carbon and the molten salt. As a result of XRD analysis, pyro-carbon exposed to the molten salt showed pure graphite after corrosion tests. As a result of TGA, whereas the coated layer by CVD showed high anti-oxidation, the non-coated layer showed relatively low anti-oxidation. The stable phases in the reactions were $C_{(S)}$, $Li_2CO_{3(S)}$, $LiCl_{(l)}$, $Li_2O$ at $650^{\circ}C$ and $C_{(S)}$, $LiCl_{(l)}$, $Li_2O_{(S)}$ at $750^{\circ}C$. $Li_2CO_{(S)}$ was decomposed at $750^{\circ}C$ into $Li_2O_{(S)}$ and $CO_{2(g)}$.

• 공업화학
• /
• 제23권5호
• /
• pp.440-444
• /
• 2012

본 연구에서 반탄화 우드칩은 저온 열처리 방법에 의하여 제조하였고, 열처리 온도에 따라 제조된 반탄화 우드칩의 열분해 특성과 발열량을 측정하였다. 반탄화 우드칩의 기초 열분해 특성을 조사하기 위하여 열중량 분석기를 이용하였고, 발열량은 발열량 측정기를 이용하여 확인하였다. 열중량 분석기 결과로부터, 저온에서 열처리된 열처리 샘플은 순수 우드칩과 유사한 $200^{\circ}C$에서 $400^{\circ}C$ 구간에서 가장 활발한 열분해 반응을 보였고, 반면에 열처리 온도의 증가에 따라 제조된 반탄화 우드칩의 초기 열분해 온도는 증가하는 것을 확인할 수 있었다. 또한, 반탄화 우드칩의 발열량은 열처리 온도의 증가에 따라 증가하는 것을 확인하였다. 이는 열처리 온도 증가에 따라 우드칩의 주성분인 셀룰로오스, 헤미셀룰로오스, 그리고 리그닌의 부분적인 탄소화에 의한 탄소함량의 증가에 기인하는 것으로 판단된다.

• 한국결정성장학회지
• /
• 제15권3호
• /
• pp.124-127
• /
• 2005

[ $Ti:LiNbO_3$ ], 광도파로 제작을 위해 큐리온도$(T_c)$ 아래에서 백금박스 내에서 알곤 과 산소 분위기 내에서 열처리 과정 동안 기판 표면의 강유전 도메인 특성 변화를 관찰하였다. 열처리 된 $LiNbO_3$ 기판의 +Z면의 경우 전체적으로 약 $1.6{\mu}m$ 두께로 도메인 반전이 이루어 졌으며, 표면에서 etch hillock이 관찰되었다. $LiNbO_3$ 결정 표면의 Li 이온이 외부로 확산 되는 영향을 감소시킬 수 있는 환경에 있는 기판 면에서 하나의 도메인이 관찰되었으며, 이때 결정 표면에서의 식각특성, 결정성 및 양이온 분포변화에 관하여 X-선 회절, AFM 및 SIMS를 이용하여 분석하였다.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.373-383
• /
• 2020

본 연구에서는 한반도 중심 해역을 포함하는 북서태평양 영역에서의 폭풍해일 예측을 위해 NEMO(Nucleus for European Modelling of the Ocean) 모형을 이용하여 지역규모의 폭풍해일 예측시스템을 구축하였다. 이 시스템은 조석과 해일 예측으로 구성되어 있으며보다 정확한 폭풍해일을 예측하기 위해 수심자료와 대기-해양 경계에서의 모수화(parameterization) 최적화 과정을 수행하였다. 이를 통해 2018년 8~10월과 태풍 솔릭 사례에 대하여 국립해양조사원 조위 관측자료를 이용한 통계 방법을 적용하여 검증을 수행하고, 이를 POM(Princeton Ocean Model) 기반의 예측모델 결과와 비교하였다. 수행결과 NEMO 기반의 폭풍해일 예측시스템이 POM 기반의 예측결과에 비해 평균오차와 RMSE가 각각 약 29%와 약 20% 감소한 것으로 나타났으며, 태풍 시기에도 NEMO 기반 예측결과에서 전반적으로 오차가 낮게 나타났다.

• 대한예방한의학회지
• /
• 제4권2호
• /
• pp.93-107
• /
• 2000

Korea follows the Korea standard classification of disease and causes of death according to the ICD(international classification of disease) Oriental medicine began to of officially follow the classification of disease for using the Korean classification of diseases in 1972. The classification of OM(oriental medicine) has changed in shape experiencing two amendments. The largest difficulty was to overcome the different names of diseases between OM and ICD. A one-to-one correspondence of the name of a disease between OM and ICD is impossible So in the primary stage one-to-one and one-to-many correspondence was made. During the first amendment the international disease names were re-classified on the oriental medicine disease name's basis and at the same time the classification of OM was corresponded on a one-to-one basis to the ICD . During the second amendment this changed to many-to-many correspondence . Analyzing the history of classification of OM during the first and second amendments, it was discovered that establishment of the standards of classification, the unification of oriental medical terms, and overcoming the difference of disease names between the OM and ICD is necessary Also th classification and standardazation of OM must not stop as a single round. It must go on for a long time. The hosts of this project Korean oriental medical society and AKOM(association of korean oriental medicine) need to build a independant department which will supervise the classification project and monitor any problems to come up. Also a route through which suggestions can be taken in and new solutions can be brought up needs to be secured and an atmosphere in which studies can take place about the basis of classifications needs to be developed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.892-895
• /
• 2006

The atmospheric effects on the retrieval of sea ice concentration from passive microwave sensors are examined using simulated data typical for the Arctic summer. The simulation includes atmospheric contributions of cloud liquid water and water vapor and surface wind on surface emissivity on the microwave signatures. A plane parallel radiative transfer model is used to compute brightness temperatures at SSM/I frequencies over surfaces that contain open water, first-year (FY) ice and multi-year (MY) ice and their combinations. Synthetic retrievals in this study use the NASA Team (NT) algorithm for the estimation of sea ice concentrations. This study shows that if the satellite sensor’s field of view is filled with only FY ice the retrieval is not much affected by the atmospheric conditions due to the high contrast between emission signals from FY ice surface and the signals from the atmosphere. Pure MY ice concentration is generally underestimated due to the low MY ice surface emissivity that results in the enhancement of emission signals from the atmospheric parameters. Simulation results in marginal ice areas also show that the atmospheric and surface effects tend to degrade the accuracy at low sea ice concentration. FY ice concentration is overestimated and MY ice concentration is underestimated in the presence of atmospheric water and surface wind at low ice concentration. In particular, our results suggest that strong surface wind is more important than atmospheric water in contributing to the retrieval errors of total ice concentrations over marginal ice zones.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.38-44
• /
• 2017

시멘트 제조 공정에서 발생하는 바이패스 더스트는 지정폐기물로서 고가의 처리비용이 요구되고 있다. 바이패스 더스트의 주성분은 KCl이며, KCl은 주로 비료에 사용되고 있다. 비료에 사용하기 위해서는 pH 수준이 중성 혹은 약산성 이어야 한다. 그러나 바이패스 더스트의 pH는 12.0~12.5 수준으로, 또다른 전처리 없이 비료로 사용될 수 없다. 본 연구에서는 시멘트 바이패스 더스트에서 KCl을 수득하는 과정 중, 이산화탄소를 사용하여 산화칼슘을 제거하고, 동시에 pH 변화량을 제어하고자 하였다. 탄산화시험기 내부 분위기를 $25^{\circ}C$-50RH%로 고정한 후, 이산화탄소 20 vol% 조건에서 0~7시간으로 유지하고, 각 시간별 산화칼슘 함량 및 pH 값을 분석하였다. 이산화탄소 유지시간 증가에 따라 산화칼슘 함량 및 pH 값은 감소하였으며, 6시간 경과 후 pH 값은 7에 근접하였다.

• 대기
• /
• 제28권4호
• /
• pp.443-455
• /
• 2018

Nowcasting algorithms using weather radar data are mostly based on extrapolating the radar echoes. We estimate the echo motion vectors that are used to extrapolate the echo properly. Therefore, understanding the general characteristics of these motion vectors is important to improve the performance of nowcasting. General characteristics of radar-based motions are analyzed for warm season precipitation over Jeju region. Three-year summer season data (June~August, 2011~2013) from two radars (GSN, SSP) in Jeju are used to obtain echo motion vectors that are retrieved by Variational Echo Tracking (VET) method which is widely used in nowcasting. The highest frequency occurs in precipitation motion toward east-northeast with the speed of $15{\sim}16m\;s^{-1}$ during the warm season. Precipitation system moves faster and eastward in June-July while it moves slower and northeastward in August. The maximum frequency of speed appears in $10{\sim}20m\;s^{-1}$ and $5{\sim}10m\;s^{-1}$ in June~July and August respectively while average speed is about $14{\sim}15m\;s^{-1}$ in June~July and $8m\;s^{-1}$ in August. In addition, the direction of precipitation motion is highly variable in time in August. The speed of motion in Lee side of the island is smaller than that of the windward side.

• 대기
• /
• 제32권2호
• /
• pp.135-148
• /
• 2022

This study investigates the influence of atmospheric river (AR) on precipitation over South Korea with a focus on regional characteristics. The 42-year-long catalog of ARs, which is obtained by applying the automatic AR detection algorithm to ERA5 reanalysis data and the insitu precipitation data recorded at 56 weather stations across the country are used to quantify their relationship. Approximately 51% of the climatological annual precipitation is associated with AR. The AR-related precipitation is most pronounced in summer by approximately 58%, while only limited fraction of precipitation (26%) is AR-related in winter. The heavy precipitation (> 30 mm day^-1) is more prone to AR activity (59%) than weak precipitation (5~30 mm day^-1; 33%) in all seasons. By grouping weather stations into the four sub-regions based on orography, it is found that the contribution of AR precipitation to the total is largest in the southern coast (57%) and smallest in the eastern coast (36%). Similar regional variations in AR precipitation fractions also occur in weak precipitation events. The regional contrast between the northern and southern stations is related to the seasonal variation of AR-frequency. In addition, the regional contrast between the western and eastern stations is partly modulated by the orographic forcing. The fractional contribution of AR to heavy precipitation exceeds 50% in all seasons, but this is true only in summer along the eastern coast. This result indicates that ARs play a critical role in heavy precipitation in South Korea, thus routine monitoring of ARs is needed for improving operational hydrometeorological forecasting.