• Journal of the Korean Society of Visualization
• /
• v.21 no.3
• /
• pp.33-38
• /
• 2023

Spray cooling is a method of cooling high-temperature heating elements by spraying droplets. Recently, spray cooling has been proposed for use in next-generation nuclear reactors. When droplets are sprayed onto the outer wall of a heat exchanger tube, a film boiling occurs on the outer wall. Over time, the outer wall temperature decreases, and a liquid film forms on the outer wall, and the heat exchanger outer wall is subsequently cooled by the liquid film. In this case, the liquid film thickness has a great influence on the heat removal performance. In this study, an experimental study was conducted to measure the liquid film thickness distribution in a droplet spray environment. For this purpose, a method using the electrical conductivity of the liquid was adopted.

• Structural Engineering and Mechanics
• /
• v.89 no.1
• /
• pp.47-59
• /
• 2024

In this study, a new sustainable material was proposed to prepare precast tunnel lining segments (TLS), which were produced using a fiber-reinforced slag-based geopolymer composite. Slag was used as the geopolymer binder. In addition, polypropylene and carbon fibers were added to reinforce TLSs. TLSs were examined in terms of flexural performance, load-deflection response, ductility, toughness, crack characteristics, and tunnel boring machine (TBM) thrust force. Simultaneously, numerical simulation was performed using finite element analysis. The mechanical characteristics of the geopolymer composite with a fiber content of 1% were used. The results demonstrated that the flexural performance and load-deflection response of the precast TLSs were satisfactory. Furthermore, the numerical results were capable of predicting and realistically capturing the structural behavior of precast TLSs. Therefore, fiber-reinforced slag-based geopolymer composites can be applied as precast TLSs.

• Korean Journal of Animal Reproduction
• /
• v.27 no.3
• /
• pp.215-223
• /
• 2003

This study was to investigate the effects of fertilization time and culture medium of pig oocytes matured in-vitro by liquid boar sperm. The sperm rich fraction (30∼60 ml) was slowly cooled to room temperature (20∼23$^{\circ}C$) by 2 h after collection. Semen was transferred into 15 ml tubes, centrifuged at room temperature for 10 min 800 ${\times}$ g, and the supernatant solution was poured off. The concentrated sperm was resuspended with 5 ml of the LEN diluent to provide 1.0${\times}$10$^{9}$ sperm/ml at room temperature. The resuspended semen was cooled in a refrigerator to 4$^{\circ}C$. The medium used for oocyte maturation was TCM-199 supplemented with 26.19 mM sodium bicarbonate, 0.9 mM sodium pyruvate, 10 $\mu\textrm{g}$/ml insulin, 2 $\mu\textrm{g}$/ml vitamin B$_{12}$ , 25 mM HEPES, 10 $\mu\textrm{g}$/ml bovine apotransferrin, 150 $\mu$M cysteamine, 10 IU/ml PMSG, 10 IU/ml hCG, 10 ng/ml EGF, 0.4% BSA, 75 $\mu\textrm{g}$/ml sodium penicillin G, 50 $\mu\textrm{g}$/ml streptomycin sulfate and 10% pFF. After about 22 h of culture, oocytes were cultured without cysteamine and hormones for 22 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. Oocytes were inseminated with liquid boar sperm stored at 4$^{\circ}C$ for 2 days after collection. Oocytes were coincubated for 1, 3, 6 and 9 h in 500 ${mu}ell$ mTBM fertilization media with 1.0${\times}$10$^{6}$ sperm/ml concentration, respectively. Thereafter, oocytes were transferred into 500 ${mu}ell$ NCSU-23, HEPES buffered NCSU-23, PZM-3 and PZM-4 culture media, respectively, for further culture of 6, 48 and 144 h. The rates of sperm penetration and male pronuclear formation were higher in the fertilization times for 6 and 9 h than in those for 1 and 3 h. The rates of cleaved oocytes were higher in the fertilization times for 6 and 9 h (85.0 and 84.6%) than in those for 1 and 3 h (61.1 and 76.8%). The percentage of blastocyst formation from the cleaved oocytes was highest in the fertilization time for 6 h (33.6%) than in that for 1, 3 and 9 h (11.4, 23.0 and 29.6%). Mean cell numbers per blastocyst were 32.9, 27.6, 26.3 and 24.4 in the fertilization times for 6, 9, 3 and 1 h, respectively. The rate of blastocyst from the cleaved oocytes and the number of cells per blastocyst were higher in HEPES buffered NCSU-23 culture medium than in NCSU-23, PZM-3 and PZM-4 culture media. In conclusion, we found out that liquid boar sperm stored at 4$^{\circ}C$ could be used for in-vitro fertilization of pig oocytes matured in-vitro. Also, we recommend the coincubation time of 6 h in 500 ${mu}ell$ TBM fertilization medium with 1${\times}$10$^{6}$ sperm/ml concentration and the HEPES buffered NCSU-23 culture medium for in-vitro fertilization of pig oocytes matured in-vitro.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.407-419
• /
• 2012

It is difficult to obtain the accurate and homogeneous height information over the whole Korea due to the effect of different vertical datums have been divided into land and sea part. In this study, we tried to unify the different vertical datums using the precise spirit leveling between TBM (tidal bench mark) and BM (bench mark) in order to solve the problems caused by different vertical datums. For this, the vertical datum offsets at observed points which were calculate from leveling results and then transformation model of vertical datum will be modelled using calculated offsets along the coastal line. For suggesting the precise modelling method to vertical datum transformation, we analyzed results from various interpolation methods such as Spline and LSC method. As the results from analysis, the LSC method combined with 4-parameters trend model is more suitable for modelling the offsets between vertical datums. The final transformation model of vertical datum using the combination of LSC and 4-parameter model which provides the transformation accuracies of ${\pm}10.4cm{\sim}14.8cm$ level. And, the software for vertical datum transformation that was also developed using the final model in order to convert the height information included in various spatial data effectively. Therefore, the transformation model between vertical datums of land and sea part, which is developed in this study, is expected to minimize the confusion caused by mismatch of height information in the use of spatial data, and it also can be minimize economic and time losses in various application fields such as coastal development project, coastal disaster prevention, etc.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.4 no.1
• /
• pp.71-87
• /
• 1998

Even though appropriate immune response is necessary for the survival of the individual, excessive or insufficient immune Response might cause autoimmune or allergic disease. So the immune response must be controlled to the degree that is beneficial for the well being of the individual. This study was undertaken to know the effects of Gunleetang Gagambang on the immune system of the mouse. Gunleetang Gagambang has been used for cure of tumor as a traditional medicine without any experimental evidence to support the rational basis for its clinical use. This study was carried out to evaluate the possible therapeutic or antitumoral effects of Gunleetang Gagambang extract against tumor, and to carry out some mechanisms responsible for its effect. Some kinds of tumor were induced by the typical application of 3-methylcholanthrene(MCA) or by the implantation(s.c) of malignant tumor cells such as leukemia cells(3LL cells) or sarcoma cells(S180 cells). Treatment of the Gunleetang Gagambang on water-extract(dailly 1mg/mouse, i. p.) was continued for 7 days prior to tumor induction and after that the treatment was lasted for 20 days. Against squamous cell carcinoma induced by MCA, Gunleetang Gagambang decreased not only the frequency of tumor production but also the number and the weight of tumors per tumor bearing mice(TBM). Gunleetang Gagambang on also significantly suppressed the development of 3LL cell and S180 cell-implanted tumors in occurrence-frequency and their size. and some developed tumors were regressed by the continuous treatment of Gunleetang Gagambang extract into TBM. In vitro, treatment of Gunleetang Gagambang extract had no effect on the growth of some kinds of cell line such as FsaII, A431 strain but significantly inhibited the proliferation of 3LL, S180 cells and augmented the DNA synthesis of mitogen-activated lymphocytes. Gunleetang Gagambang also stimulated the migrative ability of leukocyte, the MIF and IL-2 production of T lymphocytes, but not IL 6 production of B cells. Gunleetang Gagambang administration to mice enhanced NK cells activities. These results demonstrated that Gunleetang Gagambang extract exhibited a significant prophylactic benefits against tumors and its antitumor activity was manifested depending on the type of tumor cells. And these results also suggested that effect of Gunleetang Gagambang might be chiefly due to nonspecitie enhancement of NK cell activities and cell-mediated immune responses.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.337-346
• /
• 2020

Traffic jam and congestion in urban areas has caused the need to improve the utility of underground space. In response, research on underground structures is increasingly being conducted. Notably, a double-deck tunnel is one of the most widely used of all those underground structures. This double-deck tunnel is separated by the middle slab into the upper and lower roadways. Both vehicle load and earthquake load cause the middle slab to exhibit dynamic behavior. Earthquake-related response characteristics, in particular, are highly complex and difficult to interpret in a theoretical context, and thus experimental research is required. The aim of the present study is to assess the stability of a double-deck tunnel's middle slab of the Collapse Prevention Level and Seismic Category 1 with regard to the presence of vibration-damping Rubber Bearings. In vibration table tests, the ratio of similitude was set to 1/4. Linings and vibrating platforms were fixed during scaled model tests to represent the integrated behavior of the ground and the applied models. In doing so, it was possible to minimize relative behavior. The standard TBM cross-section for the virtual double-deck tunnel was selected as a test subject. The level of ground motion exerted on the bedrock was set to 0.154 g (artificial seismic wave, Collapse Prevention Level and Seismic Category 1). A seismic wave with the maximum acceleration of 0.154 g was applied to the vibration table input (bedrock) to analyze resultant amplification in the models. As a result, the seismic stability of the middle slab was evaluated and analyzed with respect to the presence of vibration-damping rubber bearings. It was confirmed that the presence of vibration-damping rubber bearings improved its earthquake acceleration damping performance by up to 40%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.44-53
• /
• 2016

The era of Big Data has come and the importance of Big Data has been rapidly growing. The part of transportation, the Four-Step Travel Demand Model(FSTDM), a traditional Trip-Based Model(TBM) reaches its limit. In recent years, a traffic demand forecasting method using the Activity-Based Model(ABM) emerged as a new paradigm. Given that transportation means the spatial movement of people and goods in a certain period of time, transportation could be very closely associated with spatial data. So, I mined Spatial Big Data from SNS. After that, I analyzed the character of these data from SNS and test the reliability of the data through compared with the attributes of TBM. Finally, I built a database from SNS for the operation of ABM and manipulate an ABM simulator, then I consider the result. Through this research, I was successfully able to create a spatial database from SNS and I found possibilities to overcome technical limitations on using Spatial Big Data in the transportation planning process. Moreover, it was an opportunity to seek ways of further research development.

• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.275-282
• /
• 2004

This study was carried out to examine the effects of development media and those change on in vitro development (IVD) of porcine oocytes matured and fertilized in vitro. Putative embryos, which were matured in vitro in modified NCSU-23 (mNCSU-23) supplemented with 10％ porcine follicular fluid (pFF) and were fertilized in mTBM, were developed in vitro as the experimental scheme. The results are as follows. When porcine putative embryos were cultured in vitro in NCSU-23 or CZB/Pig-MEM, the percentage of oocytes cleaved was not different between two systems, but the percentage of blastocysts in NCSU-23 was significantly higher than in CZB/Pig-MEM (P<0.05). And when porcine putative embryos were cultured in vitro in NCSU-23 during 7 days with or without changing media at day 5, which was supplement with or without 10％ fetal bovine serum(FBS), the percentage of oocytes cleaved, blastocysts at day 6, and the cell number of ICM, TE and total of blastocysts at day 7 were not different among three treatments. As a result of this study, it is supposed that NCSU-23 be more favorable, to develop porcine embryos derived from IVM/IVF, than CZB/Pig-MEM, but that demonstration on the effects of changing medium with fresh one stand in need of the more experiments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.5
• /
• pp.501-513
• /
• 2020

Cutter cutting tests for the cutter placement in the cutter head are being conducted through various studies. Although the cutter spacing at the minimum specific energy is mainly reflected in the cutter head design, since the optimum cutter spacing at the same cutter penetration depth varies depending on the rock conditions, studies on deciding the optimum cutter spacing should be actively conducted. The machine learning techniques such as the decision tree-based regression model and the SVM regression model were applied to predict the optimum cutter spacing ratio for the nonlinear relationship between cutter penetration depth and cutter spacing. Since the decision tree-based methods are greatly influenced by the number of data, SVM regression predicted optimum cutter spacing ratio according to the penetration depth more accurately and it is judged that the SVM regression will be effectively used to decide the cutter spacing when designing the cutter head if a large amount of data of the optimum cutter spacing ratio according to the penetration depth is accumulated.

• Journal of Preventive Medicine and Public Health
• /
• v.6 no.1
• /
• pp.17-25
• /
• 1973

For purpose of understanding of women worker's nutritional status in Korea, the author had studied oil 668 workers who are working in textile industry, chemical industry, manufacture of electrical machinery and supplies, manufacture of rubber and transportation (bus-guider). Skin-fold caliper was applicated and measured five positions. As a results of this study the following conclusions were obtained; 1. The mean skin-fold thickness were; arm: $$9.08{\pm}3.40\;mm\;(7.23{\sim}10.50\;mm)$$ back: $$16.23{\pm}5.25\;mm\;(13.18{\sim}17.20\;mm)$$ waist : $$17.86{\pm}5.82\;mm\;(13.27{\sim}19.31\;mm)$$ abdomen : $$15.45{\pm}5.04\;mm\;(10.82{\sim}16.43\;mm)$$ knee: $$13.49{\pm}4.16\;mm\;(10.80{\sim}14.04\;mm)$$ The lowest mean skin-fold thickness by age was $12.26{\pm}3.50\;mm$ at 16 year-old and the highest mean skin-fold thickness was $14.57{\pm}5.55\;mm$ at 19 yesr-old respectively. 2. Fat amounts The lowest body fat weight was 10.77 kg at 16 year-old and the highest was 12.09kg at 19 year-old, respectively. The mean body fat weight was 11.76 kg. The lowest %Fat was 20.67% at 26 year-old, the highest was 23.89% at 18 year-old and the average was 22.76%, respectively. The mean FFW was 39.94 kg and the lowest was 37.91 kg at 17 year-old, the highest was 41.64 kg at 27 year-old. The ratio of fat weight and total body mass (FW/TBM) were 21.04% at 27 year-old 23.75% at 19 year-old and average was 22.75%, respectively. The ratio of fat free weight and total body mass (FFW/TBM) were 76.25% at 19 year-old and 78.96% at 27 year-old, respectively. The average was 77.25%. The ratio of fat weight and fat free weight (FW/FFW) were 27.31% at 27 year-old and 31.15% at 19 year-old. The average was 29.44%.