• Journal of Powder Materials
• /
• v.12 no.3
• /
• pp.167-173
• /
• 2005

Production of weakly agglomerated nanopowders with the characteristic size of about 10 nm and a narrow particle size distribution is still a topical problem especially if the matter is an acceptable output (>50 g/hour), a high purity of the final product, and a low (energy consumption. The available experience and literature data show that the most promising approach to production of such powders is the evaporation-condensation method, which has a set of means for heating of the target. From this viewpoint the use of pulsed electron accelerators for production of nanopowders is preferable since they allow a relatively simple adjustment of the energy, the pulse length, and the pulse repetition rate. The use of a pulsed electron accelerator provides the following opportunities: a high-purity product; only the target and the working gas will interact and their purity can be controlled; evaporation products will be removed from the irradiation zone between pulses; as a result, the electron energy will be used more efficiently; adjustment of the particle size distribution and the characteristic size of particles by changing the pulse energy and the irradiated area. Considering the obtained results, we developed a design and made an installation for production of nanopowders, which is based on a hollow-cathode pulsed gas-filled diode. The use of a hollow-cathode gas-filled diode allows producing and utilizing an electron beam in a single chamber. The emission modulation in the hollow cathode will allow forming an electron beam 5 to 100 ms long. This will ensure an exact selection of the beam energy. By now we have completed the design work, manufactured units, equipped the installation, and began putting the installation into operation. A small amount of nanopowders has been produced.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.821-829
• /
• 2019

This study investigated the location of grading lines and grading amount for a jacket item by the target age groups (20-30, 30-40, and 40-50) for 17 women's wear brands. This study then utilized 7th SizeKorea data to analyze the increase rate of body size and to suggest the grading deviation distribution ratio of the jackets using regression analysis. The increase in neck girth of the jackets targeting aged 30-40s did not reflect the human body change rate. The shoulder length increased by 4.6%-8.1% with the bust girth increase; however, the brands produced longer shoulder length reflecting 20-35% of the bust girth increase. The armhole girth was 54.9% - 59.7% of bust circumstance increase rate. However, the 20-30 target age group brands distributed 80% of bust girth to armhole girth and the 30-40 and the 40-50 target age group brands distributed 50% of the bust girth to armhole. In particular, the 20-30 target age group brands were found to produce a large margin around the armhole. When it came to length items, the brands targeting 20-30s and the 40-50s reflected deviation distribution rate of length from underarm to waist and length from waist to hip in comparison with the overall jacket length deviation. The 30-40 target age group brands, 8 out of 20 brands distributed the jacket length deviation in the length from the back of neck to the underarm; consequently, only 22% percent should be distributed in this part.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.448-453
• /
• 2012

Nitrogen-incorporated $SnO_2$ thin films were deposited by rf magnetron sputtering. Comparative structural, electrical and optical studies of thin films deposited by sputtering of the Sn metallic target and sputtering of the $SnO_2$ ceramic target were conducted. The $SnO_2$ thin films deposited by sputtering of the Sn metallic target had a higher electrical conductivity due to a higher carrier concentration than those by sputtering of the $SnO_2$ ceramic target. Structurally the $SnO_2$ thin films deposited by sputtering of the $SnO_2$ ceramic target had a better crystallinity and a larger grain size. This study confirmed that there were distinct and clear differences in electrical, structural, and optical characteristics between $SnO_2$ thin films deposited by reactive sputtering of the Sn metallic target and by direct sputtering of the $SnO_2$ ceramic target.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.129-132
• /
• 1996

Surface modification like cone formation on Pulsed laser deposition (PLD) occurs in YBCO target surface irradiated by laser beam. Cone formation results in a reduction of deposition rate, so that it is significant obstacles to an efficient deposition process. With the change of various conditions such as the number of laser shot, target density, direction of incoming laser beam, we have systematically analyzed the modification of target surface. Because cones formed by beam-target interactions grow in direction of incoming laser beam, we have used the method of rotating the target position by 180$^{\circ}$ with the same number and position of laser shot. Experimental results of losing the directionality and changing the shape of cones formed on laser irradiated YBCO target surface is obtained by the SEM image. Also, we have observed that the size of cones formed on target by pulsed laser became larger with increasing the number of laser shots.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1485-1487
• /
• 2000

A variety of target configurations in sputtering process have been proposed to deposit various structures of thin film alloys and compound films. In this study, we presented the comparative experimental results regarding to the characterization of properties of Cu-Ni thin films deposited by using a magnetron co-sputtering method, as a function of target configurations; one is using a single target with varying the area of Ni chips attached on the Cu target and another is using a dual-type target with two targets of Ni and Cu separated each other. Structural(d-spacing, crystal orientation, crystallite size, cross-sectional morphology) and electrical(resistivity) properties of deposited films are characterized and compared as a function of target configurations as well as deposition conditions.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.891-899
• /
• 2021

The United Nations' Millennium Development Goals (MDG) has become a goal to create a sustainable life. The MDGs' target was to be achieved in 2015, but it missed that date. The MDGs' target has turned into a Sustainable Development Goals (SDGs) to be achieved by 2030 The SDGs require financial support from companies. Funds are one of the resources to implement the SDGs. Government and private companies need to cooperate in achieving the SDGs target. The company has a responsibility to implement corporate social responsibility. The company's corporate social responsibility is part of the implementation of sustainable development in the SDGs. One of the essential industries that have responsibility for SDGs is the financial industry. This study aims to examine the determinant of corporate social responsibility funds in financial institutions in ASEAN countries. This study uses panel data to test the determinant variables on CSF provision. This study uses 45 sustainable development reports from 2015-2019. The total number of banks in the sample came from three countries, namely, Indonesia, Malaysia, and Thailand. This study concludes that firm size, profitability, efficiency, and the age of the CEO are variables that influence the size of corporate social responsibility funds.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.1
• /
• pp.59-67
• /
• 1995

Depending upon the eye and head movement, the visual field is often classified into three categories ; stationary field, eye field and head and eye field. To investigate the effect of background condition on the size of the visual field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the perimeter modified to cover the range of 330 .deg. around the fixation point, with the visual angle subtended 1.4 .deg. vertically and horizontally. Nontarget density, meridian, size contrast and subject showed a significant effect on the visual field at .alpha. =0.01, where density was inversely proportional to the size of the visual field, and size contrast linearly proportional to the size of the visual field. The size of the visual field on horizontal axis was larger than that on vertical axis, and that on right and upper meridian was also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. In addition, the regression equations to predict the visual field on the given background condition were suggested. These results were expected to be used as a design guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.159-167
• /
• 2017

Software safety is a key issue in embedded system of automotive and aviation industries. Various software testing approaches have been proposed to achieve software safety like ISO26262 Part 6 in automotive environment. In spite of one of the classic and basic approaches, stack memory is hard to estimating exactly because of uncertainty of target code generated by compiler and complex nested interrupt. In this paper, we propose an approach of analyzing the maximum stack usage statically from target binary code rather than the source code that also allows nested interrupts for determining the exact stack memory size. In our approach, determining maximum stack usage is divided into three steps: data extraction from ELF file, construction of call graph, and consideration of nested interrupt configurations for determining required stack size from the ISR (Interrupt Service Routine). Experimental results of the estimation of the maximum stack usage shows proposed approach is helpful for optimizing stack memory size and checking the stability of the program in the embedded system that especially supports nested interrupts.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.807-810
• /
• 2003

The PCI 2.2 spec introduces Delayed Transaction mechanism to improve system performance for target device with slow local bus. But this mechanism has some restriction since target device doesn't know prefetch data size. So, we propose a new mechanism, which target device prefetch exact data on local bus, to improve data rate on PCI or local interface. The simulation results showed that the proposed mechanism more improves system performance than the Delayed Transaction mechanism.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.66-74
• /
• 2008

This paper presents a new small target detection method using scale invariant feature. Detecting small targets whose sizes are varying is very important to automatic target detection. Scale invariant feature using the Laplacian scale-space can detect different sizes of targets robustly compared to the conventional spatial filtering methods with fixed kernel size. Additionally, scale-reflected adaptive thresholding can reduce many false alarms. Experimental results with real IR images show the robustness of the proposed target detection in real world.