• 제목/요약/키워드: target mobility

검색결과 221건 처리시간 0.1초

A Receiver-Aided Seamless And Smooth Inter-RAT Handover At Layer-2

  • Liu, Bin;Song, Rongfang;Hu, Haifeng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권10호
    • /
    • pp.4015-4033
    • /
    • 2015
  • The future mobile networks consist of hyper-dense heterogeneous and small cell networks of same or different radio access technologies (RAT). Integrating mobile networks of different RATs to provide seamless and smooth mobility service will be the target of future mobile converged network. Generally, handover from high-speed networks to low-speed networks faces many challenges from application perspective, such as abrupt bandwidth variation, packet loss, round trip time variation, connection disruption, and transmission blackout. Existing inter-RAT handover solutions cannot solve all the problems at the same time. Based on the high-layer convergence sublayer design, a new receiver-aided soft inter-RAT handover is proposed. This soft handover scheme takes advantage of multihoming ability of multi-mode mobile station (MS) to smooth handover procedure. In addition, handover procedure is seamless and applicable to frequent handover scenarios. The simulation results conducted in UMTS-WiMAX converged network scenario show that: in case of TCP traffics for handover from WiMAX to UMTS, not only handover latency and packet loss are eliminated completely, but also abrupt bandwidth/wireless RTT variation is smoothed. These delightful features make this soft handover scheme be a reasonable candidate of mobility management for future mobile converged networks.

The characteristics of Al-doped ZnO films deposited with RF magnetron sputtering system in various H2/(Ar+H2) gas ratios

  • Kim, Jwayeon;Han, Jungsu;Park, Kyeongsoon
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc2호
    • /
    • pp.407-410
    • /
    • 2012
  • The properties of Al-doped ZnO (AZO) films were investigated as a function of H2/(Ar + H2) gas ratio using an AZO (2 wt% Al2O3) ceramic target in a radio frequency (RF) magnetron sputtering system. The deposition process was done at 200 ℃ and in 2 × 10-2Torr working pressure and with various ratios of H2/(Ar + H2) gas. During the AZO film deposition process, partial H2 gas affected the AZO film characteristics. The electron resistivity (~ 9.21 × 10-4 Ωcm) was lowest and mobility (~17.8 ㎠/Vs) was highest in AZO films when the H2/(Ar + H2) gas ratio was 2.5%. When the H2/(Ar + H2) gas ratio was increased above 2.5%, the electron resistivity increased and mobility decreased with increasing H2/(Ar + H2) gas ratio in AZO films. The carrier concentration increased with increasing H2/(Ar + H2) gas ratio from 0% to 7.5%. This phenomenon was explained by reaction of hydrogen and oxygen and additional formation of oxygen vacancy. The average optical transmission in the visible light wavelength region over 90% and an orientation of the deposition was [002] orientation for AZO films grown with all H2/(Ar + H2) gas ratios.

보철물 조건에 따른 Periotest수치의 실험적 평가 (IN VITRO EVALUATION OF PERIOTEST VALUES UNDER VARIOUS CONDITIONS OF PROSTHESES)

  • 한중석
    • 대한치과보철학회지
    • /
    • 제35권4호
    • /
    • pp.793-800
    • /
    • 1997
  • Periotest(Siemens, Germany) has been used to test mobility of the implants clinically, however the effects of target materials and connection methods on the PTVs(Periotest Values) have not been evaluated. Periotest has been regarded as a reliable and objective tool to test implant and natural teeth mobility clinically, however this instrument showed different PTVs under various test conditions. This in vitro study was designed to compare PTVs of different veneering materials and prosthodontic designs (single and bridge restorations). To compare the effects of veneering materials on PTVs, 1 mm thickness of five different testing materials (porcelain, type III gold alloy, pure titanium, composite resin, acrylic resin) were placed on the resin block. Three full length of 13 mm Mark II implant fixtures were embedded into autopolymerizing resin block to fabricate single and bridge restorations. To evaluate effects of the connection method in single restorations, PTVs of screw retained(UCLA type) and cementation type(Cera-One system) were compared. Finally, to test reliability of PTVs of the final restorations, screw retained three unit short span PFM bridges were fabricated on the standard and Estheti-Cone abutments. All testing components were tightened with torque controller and PTVs of all specimens were measured 15 times for statistical analysis with SAS program. Following conclusions were made within the limit of this in vitro study. 1. PTVs of type III gold alloy, grade II titanium, composite resin veneering materials showed no significant differences, however acrylic resin and porcelain showed significant differences (P<0.05). 2. Single tooth restorations showed consistent PTVs as long as proper torque force was applied. 3. PTVs of bridge type prostheses was inconsistent regardless of abutment types. 4. PTVs of the prostheses showed higher scores and standard deviations than those of abutments regardless types of connection (P<0.05).

  • PDF

순환 지연 다이버시티를 사용하는 OFDM 시스템을 위한 선형 프리코팅 기법 (A Linear Precoding Technique for OFDM Systems with Cyclic Delay Diversity)

  • 휘빙;김영범;장경희
    • 한국통신학회논문지
    • /
    • 제34권3A호
    • /
    • pp.197-204
    • /
    • 2009
  • 순환 지연 다이버시티(CDD, cyclic delay diversity) 기법은 주파수 다이버시티를 이용하여 OFDM 시스템의 성능을 향상시키는 기법이다. 또한, 선형 프리코딩 기법은 채널 상황 정보(CSI, channel state information)를 이용하여 통신 시스템의 성능을 크게 증가시킬 수 있는 기법이다. 본 논문은 기존의 CDD-OFDM 송신 다이버시티 기법보다 향상된 성능을 얻기 위하여 선형 프리코딩 기법의 적용을 제안한다. 제안된 기법은 채널 상황 정보 feedback이 필요한 FDD(frequency division duplex) 시스템 보다, feedback을 사용할 필요 없이 채널 가역성(reciprocity)의 성질을 이용할 수 있는 TDD(time division duplex) 시스템에서 더욱 효과적이다. 모의실험 결과를 통해 본 논문에서 제안된 기법이 기존의 프리코딩을 사용하지 않는 CDD-OFDM 시스템에 비하여 target BER $10^{-4}$에서 3km/h의 이동성(mobility)을 갖는 flat 페이딩 채널과 Pedestrian A(Ped A) 채널, 120km/h의 이동성을 갖는 flat 페이딩 채널과 Vehicular A(Veh A) 채널에서 각각 6.3dB. 6.2dB, 2.8dB, 3.8dB의 SNR 성능 이득을 얻는 것을 보인다.

ZnO 스퍼터링에서 기판전압의 변화에 의한 성장 조절 (Control of ZnO Sputtering Growth by Changing Substrate Bias Voltage)

  • ;최재원;전원진;조중열
    • 반도체디스플레이기술학회지
    • /
    • 제16권2호
    • /
    • pp.94-97
    • /
    • 2017
  • Amorphous Si has been used for data processing circuits in flat panel displays. However, low mobility of the amorphous Si is a limiting factor for the data transmission speed. Metal oxides such as ZnO have been studied to replace the amorphous Si. ZnO is a wide bandgap (3.3 eV) semiconductor with high mobility and good optical transparency. When ZnO is grown by sputtering with $O_2$ as an oxidizer, there can be many ion species arising from $O_2$ decomposition. $O^+$, $O_2{^+}$, and $O^-$ ions are expected to be the most abundant species, and it is not clear which one contributes to the ZnO growth. We applied alternating substrate voltage (0 V and -70 V) during sputtering growth. We studied changes in transistor characteristics induced by the voltage switching. We also compared ZnO grown by dc and rf sputtering. ZnO film was grown at $450^{\circ}C$ substrate temperature. ZnO thin-film transistor grown with these methods showed $7.5cm^2/Vsec$ mobility, $10^6$ on-off ratio, and -2 V threshold voltage.

  • PDF

도심 항공 모빌리티의 다학제 설계 프레임워크 개발 (Development of a Multidisciplinary Design Framework for Urban Air Mobility)

  • 김현수;김형석;임대진;이관중
    • 한국항공우주학회지
    • /
    • 제50권8호
    • /
    • pp.583-590
    • /
    • 2022
  • 본 논문에서는 UAM의 다학제 설계 프레임워크 MADAM (Multidisciplinary Analysis Design for Advanced Mobility)을 소개한다. UAM의 실제 운영에서는 항공기 성능뿐 아니라 서비스의 수요와 비용 그리고 운항 시나리오까지 서로 상관관계가 있다. 따라서 다학제를 종합적으로 고려하는 프레임워크는 필수적이다. 본 연구에서는 다학제 설계 프레임워크 MADAM을 개발하였고 이를 소개한다. 프레임워크를 이용한 서울 지역에서 김포-삼성 UAM 노선의 수요 및 비용분석을 예시 결과로 제시하였다. 높은 비용을 요구하는 주요 요소들의 연도별 양상 변화를 적용하여 35년에는 7만 6천원 가장 높은 총이익을 도출하는 티켓 가격으로 계산이 되었다.

UAM 추락 시 인구 밀접 지역 지상 인명피해 분석 (Analysis of Human Casualties on the Ground in Urban Area due to UAM Crash)

  • 김연실;최인호
    • 한국항행학회논문지
    • /
    • 제26권5호
    • /
    • pp.281-288
    • /
    • 2022
  • 본 연구에서는 무게 약 1톤, 속도 약 100km/h에 달하는 멀티콥터 형 UAM(Urban Air Mobility)가 도심 지역에서 추락했을 때 발생할 수 있는 인명피해를 정량적으로 분석하였다. UAM 수요가 가장 많을 것으로 예상되는 서울지역의 인구밀도 및 건물 데이터 베이스를 기반으로 UAM 추락 시 충돌에 노출되는 인구를 도출하였고 멀티콥터 형 비행체가 제어 불가능한 상태에서의 무동력 추락을 고려하여 항력을 고려한 자유낙하 모델을 통해 UAM 추락 시 사고영향 반경을 계산하였다. 더불어, 사고영향 반경이 증가할 때 지상의 인명피해의 변화를 분석하였다. 최종적으로 서울지역에 대한 UAM 추락 시 지상 인명피해 맵을 생성하였고 서울의 대부분의 지역에서 UAM 추락 시 약 1~10명 내외의 인명피해가 발생할 수 있음을 확인하였다. 이를 통해 TLS (Target Level of Safety)를 만족하는 UAM의 고장률 요구사항을 분석하였다.

GIS 분석을 활용한 부산권 버티포트 위치 및 회랑 선정에 관한 연구 (A Study on Vertiport Location and Corridor Selections using GIS Analysis in Busan Area)

  • 문찬희;시하영;구태완;강범수
    • 항공우주시스템공학회지
    • /
    • 제17권6호
    • /
    • pp.46-53
    • /
    • 2023
  • 도심 교통 체증과 환경오염이 중요한 대도시 문제로 부각되는 가운데, 최근에는 Urban Air Mobility(UAM)가 효율적인 대책으로 주목받고 있다. 본 연구에서는 부산 지역의 지형 및 인프라 등의 실제 데이터를 고려한 GIS 기반 공간 분석과 군집 알고리즘을 수행하였으며 이를 통해 UAM 운영을 위한 버티포트 위치와 경로를 선정할 수 있었다. 부산권 UAM 인프라 시스템의 중심으로 예상되는 김해국제공항을 기반으로, 목표 지역에서 세 개의 버티포트 위치가 적합하다 판단하였으며, 이후 지상 위험 평가(Ground Risk)를 고려한 A*(A-star) 알고리즘을 이용해 위험도와 거리를 최소화하는 비행경로를 선정하였고, 이를 통해 최소 거리 경로 대비 80.168%의 위험 감소 효과를 확인하였다.

Seamless Lawful Interception Handover for 3G IP Multimedia Subsystem (IMS)

  • In, Hoh Peter;Lee, Myoung-Rak;Kim, Do-Hoon;Kim, Nung-Hoe;Yoon, Byung-Sik
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권7호
    • /
    • pp.1329-1345
    • /
    • 2011
  • After the 9.11 terror attack, lawful Interception (LI) has emerged as an important tool for anti-terrorist activity. Law enforcement agents and administrative government bodies effectively monitor suspicious target users of permanent IP-based network devices by LI in Packet Data Networks (PDNs). However, it is difficult to perform LI in monitoring migrating users from a location to another, who change their IPs due to the proliferation of portable Internet devices enabling 3G IP Multimedia Subsystems (IMS). The existing, manual handover technique in 3G IMS makes it even more difficult to continue the LI activities due to time-lag reissuance of LI authority warrants when the target users move to a new LI jurisdiction via a roaming service. Our proposed model is a seamless LI handover mechanism in 3G IMS to support mobility detection of the target users. The LI warrants are transferred to the new LI agent automatically with the target users when they move to a new LI jurisdiction. Thus, time-lag human intervention of reissuance of the LI warrants is removed and enables the LI authorities to continue monitoring. In the simulation of our proposed mechanism, the quality of lawful interception achieves a mean score of over 97.5% out of the possible 100% maximum score, whereas the quality of the existing mechanism has a mean score of 22.725%.

Zebrafish Dnd protein binds to 3'UTR of geminin mRNA and regulates its expression

  • Chen, Shu;Zeng, Mei;Sun, Huaqin;Deng, Wenqian;Lu, Yilu;Tao, Dachang;Liu, Yunqiang;Zhang, Sizhong;Ma, Yongxin
    • BMB Reports
    • /
    • 제43권6호
    • /
    • pp.438-444
    • /
    • 2010
  • Dnd (dead end) gene encodes an RNA binding protein and is specifically expressed in primordial germ cells (PGCs) as a vertebrate-specific component of the germ plasma throughout embryogenesis. By utilizing a technique of specific nucleic acids associated with proteins (SNAAP), 13 potential target mRNAs of zebrafish Dnd (ZDnd) protein were identified from 8-cell embryo, and 8 target mRNAs have been confirmed using an RT-PCR analysis. Of the target mRNAs, the present study is focused on the regulation of geminin, which is an inhibitor of DNA replication. Using electrophoretic mobility shift assay (EMSA), we demonstrated that ZDND protein bound the 67-nucleotide region from 864 to 931 in the 3'UTR of geminin mRNA, a sequence containing 60.29% of uridine. Results from a dual-luciferase assay in HEK293 cells showed that ZDND increases the translation of geminin. Taken together, the identification of target mRNA for ZDnd will be helpful to further explore the biological function of Dnd in zebrafish germ-line development as well as in cancer cells.