• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.832-846
• /
• 2020

The purpose of this research was to evaluate the vapor permeability of nine different species of domestic softwood and the vapor permeability evaluation through the production of small wall structures for the developing applications, utilizing the vapor permeability of wood. In addition, the permeability evaluation was attempted by means of the production of a small wall structure injected with a waste material, bottom ash, as a moisture absorbent for improving the permeability. Consequently, the results of the vapor permeability evaluation by means of S_d value are as follows: (1) It was observed that Abies holiphylla, Picea jezoensis, Ginkgo biloba, Pinus koraiensis and Pinus rigida are permeable to moisture among 9 species of domestic softwood in Korea. (2) By means of this, semi-permeability efficiency was evaluated when producing a small wall structure. (3) Besides, improved effects of permeability were evaluated when producing a small wall structure inserted with bottom ash. As a result, it was confirmed that the S_d value of Pinus koraiensis turned out to be 1.63, which is superior to other 8 tree species.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.257-262
• /
• 2013

A ship operating in rough sea may suffer from an undesirable motion which may severely degrade the performance of equipment onboard and give a person an uncomfortable feeling. Hence, roll stabilization received a considerable attention and various devices including bilge keels, stabilizing fins, gyroscopic, anti-rolling tanks, rudders and flaps have been conceived and utilized for the purpose. The Coanda effect is evident when a jet stream is applied tangential to a curved surface of a hydrofoil since then the jet increases the circulation around the foil and consequently the lift. Model tests and numerical simulation have been conducted to examine the practicality of a fixed type fin stabilizer augmented by the Coanda jet. The results show that the lift coefficient of the modified Coanda fin at the zero angle of attack identically coincides with that of the original fin at ${\alpha}=\26^{\circ}$ when Coanda jet is supplied at the rate of $C_j$ = 0.25. It is also shown that fixed type fin stabilizers for active control of the motions of ships and the other mobile units without rotation can be put to practical use if the Coanda effect is applied.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.327-336
• /
• 2013

Anatomical characteristics of White Jabon (Arthocephalus cadamba) and Red Jabon (Arthocephalus macrophyllus) were investigated by IAWA hardwood feature list. Both species were diffuse-porous, and radial multiple pore with 2~3 rows was mostly observed. Tangential diameter of vessel lumina was 100 to $200{\mu}m$, and vessels per square millimeter were 5 to 20. White Jabon has more vessels than Red Jabon. The number of solitary pore per square millimeter in both species was similar, but more pore multiple was observed in White Jabon. Axial parenchyma diffuse was observed in both species, but axial parenchyma of White Jabon was hardly identified on the cross section. Rays were classified into "body ray cells procumbent with over 4 rows of upright/square marginal cells" type and partly "all ray cells upright and/or square" type on radial section. Ray width 1 to 3 cells and 1 to 2 cells observed in White Jabon and Red Jabon, respectively. Ray height of White Jabon was $420{\mu}m$ and Red Jabon $474{\mu}m$. Fiber length was the range of 900 to $1,600{\mu}m$ in both species, and it showed a tendency to increase from pith to bark. Consequently, it is considered that pore multiple, ray width and axial parenchyma are to be suggested the keys for identification of both species.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.622-628
• /
• 2017

In order to develop value-added utilization technology of domestic oaks the processing yield rate from the standing tree to the flooring material for the Quercus variabilis and Quercus mongolica were investigated. Also, to reduce drying time, improved drying schedule was applied and the physical properties were measured. The drying time was 173 hours in total, and the final moisture content was 5.39% (Quercus variabilis) and 4.17% (Quercus mongolica). The color difference of oak lumber before and after drying showed a significant change as ${\Delta}E$ value from 7 to 11. The shrinkage rates of Quercus variabilis and Quercus mongolica during drying were 8.1% and 8.5% in the tangential direction and 5.0% and 6.2% in the radial direction, respectively. The lumber manufacturing yield rate of sawn lumber was 30 to 40% and that of the final product was 8 to 15%. It is expected that the processing characteristics of the Quercus species investigated in this research could contribute to formulate an efficient production plan of domestic hardwoods that are still under utilization.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.333-344
• /
• 2013

This paper discussed about the effect of permeability reduction of the jointed rock mass in the vicinity of a tunnel which is one of the reasons making large difference between the estimated ground-water inflow rate and the measured value. Current practice assumes that the jointed rock mass around a tunnel is a homogeneous, isotropic porous medium with constant permeability. However, in actual condition the permeability of a jointed rock mass varies with the change of effective stress condition around a tunnel, and in turn effective stress condition is affected by the ground water flow in the jointed rock mass around the tunnel. In short time after tunnel excavation, large increase of effective tangential stress around a tunnel due to stress concentration and pore-water pressure drop, and consequently large joint closure followed by significant permeability reduction of jointed rock mass in the vicinity of a tunnel takes place. A significant pore-water pressure drop takes place across this ring zone in the vicinity of a tunnel, and the actual pore-water pressure distribution around a tunnel shows large difference from the value estimated by an analytical solution assuming the jointed rock mass around the tunnel as a homogeneous, isotropic medium. This paper presents the analytical solution estimating pore-water pressure distribution and ground-water inflow rate into a tunnel based on the concept of hydro-mechanically coupled behavior of a jointed rock mass and the solution is verified by numerical analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.29-37
• /
• 2018

Bamboo is one of the major biomass resources in the world. To obtain valuable information for effective use of bamboo resources in Korea, the anatomical characteristics of the commercial Korean bamboo species (Phyllostachys pubescens, Phyllostachys nigra, and Phyllostachys bambusoides) were analyzed. The structures in bamboo culm were observed by optical and scanning electron microscopy. Also the crystalline properties as relative crystallinity and crystallite width were measured by an X-ray diffraction method. The three Korean bamboo species had the vascular bundle type I with tylosoid in intercellular space. In the outer part of culm, vascular bundles showed denser spacing than inner part. The fiber length in outer part samples of the three bamboo species showed longer than inner part samples. Furthermore, the fiber length showed a significant difference between inner part and outer part in three bamboo species, showing the longest fiber length in Phyllostachys bambusoides. Phyllostachys pubescens showed the greatest diameter in vessel and parenchyma on cross section. Parenchyma cells in Phyllostachys pubescens and Phyllostachys bambusoides showed similar length and width in both radial and tangential sections. The relative crystallinity and crystallite width in outer part samples of the three bamboo species showed higher values than those in inner part samples, with the greatest values from Phyllostachys bambusoides.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2889-2894
• /
• 2015

Background: To investigate the impact of the breast size, shape, maximum heart depth (MDH), and chest wall hypotenuse (the distance connecting middle point of the sternum and the length of lung draw on the selected transverse CT slice) on the volumetric dose to heart with whole breast irradiation (WBI) of left-sided breast cancer patients. Materials and Methods: Fifty-three patients with left-sided breast cancer undergoing adjuvant intensity-modulated radiotherapy (IMRT) were enrolled in the study. The primary breast size and shape, MHD and DCWH (chest wall hypotenuse) were contoured on radiotherapy (RT) planning CT slices. The dose data of hearts were obtained from the dose-volume histograms (DVHs). Data were analyzed by one-way analysis of variance (ANOVA), Student's t-test and linear regression analysis. Results: Breast size was independent of heart dose, whereas breast shape, MHD and DCWH were correlated with heart dose. The shapes of breasts were divided into four types, as the flap type, hemisphere type, cone type and pendulous type with heart mean dose being $491.8{\pm}234.6cGy$, $752.7{\pm}219.0cGy$, $620.2{\pm}275.7cGy$, and $666.1{\pm}238.0cGy$, respectively. The flap type of breasts shows a strong statistically reduction in heart dose, compared to others (p=0.008 for V30 of heart). DCWH and MHD were found to be the most important parameters correlating with heart dose in WBI. Conclusions: More attention should be paid to the heart dose of non-flap type patients. The MHD was found to be the most important parameter to correlate with heart dose in tangential WBI, closely followed by the DCWH, which could help radiation oncologists and physicsts evaluate heart dose and design RT plan in advance.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.274-281
• /
• 2011

We analysed ground motions form Mw 4.3 earthquake around Backryoung Island for the seismic source focal mechanism and horizontal response spectrum. Focal mechanism of the Backryoung Islands area was compared to existing principal stress orientation of the Korean Peninsula and horizontal response spectrum was also compared to those of the US NRC Regulatory Guide (1.60) and the Korean National Building Code. The ground motions of 3 stations, including vertical, radial, and tangential components for each station, were used for grid search method of moment tensor seismic source. The principal stress orientation from this study, ENE-WSW, is consistent fairly well with that of the Korean Peninsula. The horizontal response spectrum using 30 observed ground motions analysed and then were compared to both the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings (1997). Response spectrum of 30 horizontal ground motions were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that the horizontal response spectrum revealed higher values for frequency bands above 3 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed higher values for the frequency bands below 0.8 second than the Korean Standard Response Spectrum (SD soil condition). However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the higher frequency bands.