• Title/Summary/Keyword: tan$\delta$

Search Result 521, Processing Time 0.031 seconds

Electrical ppropperties of the In-situ Grown (Pb,La)$TiO_3$ Films on the Pt/MgO(100) (Pt/MgO(100) 기판상에 In-situ 성장된 (Pb,La)$TiO_3$ 박막의 전기적 특성)

  • 이상열;김민영;장호영;장지근
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1996.06a
    • /
    • pp.180-181
    • /
    • 1996
  • 적외선 센서의 재료로 활용되고 있는 ppLT 박막(두께:8000~9000$\AA$)을 ppt/MgO(100)의 하부 구조상에 50$0^{\circ}C$$600^{\circ}C$에서 스퍼터링 증착하여 결정성 및 전기적 특성을 조사하였다. $600^{\circ}C$로 in-situ 성장된 ppLT 박막은 c-축(00l) 방향으로 배향 성장되었 고, 비유전상수(r)와 유전정접(tan)의 값이 10kHz~100kHz의 주파수에서 $\varepsilon$r≒35와 tan$\delta$≒ 0.01로 나타났다. 잔류분극량(2ppr)과 초전계수(${\gamma}$)는 상온부근에서 2ppr≒5$\mu$C/cm2, ${\gamma}$≒4$\times$ 10-8C/cm2.$^{\circ}C$로 비교적 양호한 초전박막의 전기적 특성을 나타내었다.

  • PDF

Deterioration of Polyethylene Films Induced by Partial Discharge and Variations Observed in Mechanical Properties (Polyethylene film의 부분방전열화와 역학적 특성)

  • ;Shigeru Yamamot
    • Journal of the Korean Society of Safety
    • /
    • v.4 no.1
    • /
    • pp.5-14
    • /
    • 1989
  • Deterioration induced by partial discharge was investigated for low-density polyethylene samples. Under an electrical field, a cold-drawn PE film was stretched perpendicularly to the direction of the original drawing. The starting voltage of the discharge shows a minimum at the draw ratio of 1.2 to 1.8. Around the same draw ratio, the elastic modulus and mechanical loss factor (tan S) of the sample exhibit a minimum and a maximum, respectively. According to the X-ray analysis, the size itf microcrystals decreases with increasing draw ratios. Reorientation of the ru01ecular chains was observed above a draw ratio of 1.5 by the IR method.

  • PDF

Hall Effect of High $T_{c}$ superconductor $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ Thin Film (고온초전도체 $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ 박막의 Hall 효과)

  • 허재호;류제천;김형국;김장환
    • Journal of the Korean Magnetics Society
    • /
    • v.4 no.1
    • /
    • pp.44-47
    • /
    • 1994
  • High $T_{c}$ superconducting $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ thin film was grown up for c-axis orientation by epitaxial growth method on $LaAlO_{3}$ single crystal substrate. The crystal structures of this thin film were found to be c-axis orientation by X-ray diffraction patterns. Hall effect and resistivity measurements were made by van der Pauw method. Hall resistivity was calculated from the magnetoresistivity by considering thermomagnetic effect. The relation was $pH=p_{s}tan{\alpha}_{n}-QBT\frac{S_s}{K_s}$ The measured Hall resistivity and the calculated one are in good agreement each other.

  • PDF

Additive Effects on Magnetic Properties in High Permeability Mn Zn Ferrite (고투자율 Mn-Zn 페라이트의 첨가물 효과에 따른 자기적 특성연)

  • Jeong, Gap-Gyo;Choe, Seung-Cheol
    • Korean Journal of Materials Research
    • /
    • v.3 no.5
    • /
    • pp.497-504
    • /
    • 1993
  • Effects of $Ta_2O_5,ZrO_2$ and $SiO_2$ addition on magnetic properties of 0.02wt%$Bi_2O_3$ and 0 . 0 5 wt%$CaCO_3$ doped Mn-Zn ferrites(58.5mol% $Fe_2O_3$, 25.5 mol% ZnO) were investigated. E:lectrlcal resistivity and magnetic properties such as the initial permeability($\mu_i$), loss factor(tan$\delta$), coercive force Hc(m0c) were measured. With lncreasing $Ta_2O_5$ and $ZrO_2$ addition, the following effects were observed: I ) Decreasing of the average grain size; 2) lncreasing of the electrical resistivity and initial permeability; 3) Ilecreasmg of loss factor values. (very low loss esprcially at high frequency region) ; 4 ) Fine and uniform microsrructures were obtamed at O.lwt% nddecl samples. In case of $SiO_2$ addition, anomalous grain growth and degradation of magnetic properties were observed. The obtained maximum initial permeability value was 6260 at IOkHz. $25^{\circ}C$ from 0.02wt%$Bi_2O_3$. 0.05wt%$CaCO_3$, 0.lwt%$Ta_2O_5$ added sample, the corresponded relative loss factor (tan$\delta /\mu_i$)for the sample was $4.2 \times 10^{-6}$.

  • PDF

Filler Nano/Micro 혼합비가 Epoxy 수지의 유전특성에 미치는 영향

  • Jeong, In-Beom;Choe, Hyeon-Min;Sin, Jong-Yeol;Lee, Jong-Yong;Hong, Jin-Ung
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.249-249
    • /
    • 2009
  • we have studied that a effect depending on dielectric properties of epoxy resin mixing filler nano/micro. When compare with nano/micro composite and virgin, the nano/micro composite is better than virgin. A specimen mixing nano/micro is changed as temperate, however the width of change is low.

  • PDF

Electrical Properties of Pb(Mg1/3 Nb2/3)O3 Ceramics (Pb(Mg1/3 Nb2/3)O3 세라믹스의 전기적 특성)

  • 강동헌;윤기현
    • Journal of the Korean Ceramic Society
    • /
    • v.26 no.5
    • /
    • pp.712-718
    • /
    • 1989
  • PMN ceramics with excess MgO addition in the range of 0 to 70m/o were prepared, and their electrical properties, such as dielectric constant, tan$\delta$, diffuseness coefficient, remanent polarization, coercive field and electrical conductivity were measured. Dielectric constant and remanent polarization increased with up to 5m/o excess MgO and then decreased presumely due to the precipitation of second phase, etc. Electrical conductivity slightly increased with the addition of excess MgO.

  • PDF

Microwave dielectric properties and deposition of epitaxial $BaTiO_3$ films by RF magnetron sputtering (RF 마그네트론 스퍼터링으로 증착한 epitaxial BaTiO3 박막 성장과 유전특성)

  • 현태선;조영우;최시경
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.11a
    • /
    • pp.104-104
    • /
    • 2003
  • RF magnetron sputtering 법을 이용하여 LaA1O$_3$, SrTiO$_3$, MgO 단결정 기판 위에 BaTiO$_3$ 박막을 에피텍셜하게 증착하여 박막의 특성과 마이크로 웨이브에서의 유전특성을 평가하였다. 각 기판위에 증착한 박막의 격자상수와 FWHM을 조사하였고, pole figure로 에피텍셜 성장을 관찰하였다. 각 시편에 상부 전극으로 interdigital 타입의 전극을 photolithography 하여 캐패시턴스와 tan $\delta$을 조사하였다. 각 기판의 변화에 따른 격자상수 변화와 유전 특성의 변화를 고찰하였다.

  • PDF

Influence of Filler Shape on Dielectric & Electric Charge-Discharge Properties of Filled Epoxy Resin (에폭시 수지의 유전특성.충방전특성에 미치는 충전제 형상의 영향)

  • 이성일;박일규;류성림;주인규
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2000.11a
    • /
    • pp.81-84
    • /
    • 2000
  • In this paper, we have the investigated the Influence of Filler Shape on Dielectric & Electric Charge-Discharge Properties of Filled Epoxy Resin. In the low frequency range from 50Hz to a few kHz, the maginitude of tan$\delta$ become larger in the order, NON, RAS, SAS, SCS. The electrical Discharge of RAS measured for 60 min, decreased after 10$^2$∼10$^3$.

  • PDF

메조페이스/등방성핏치의 방사성판단을 위한 점탄성 거동

  • 양갑승;김용중
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.04a
    • /
    • pp.25-27
    • /
    • 1998
  • 나프탈렌으로부터 제조된 메조페이스 핏치(NMP)와 개질된 등방성 콜타르 핏치(MCP)의 방사성을 유변학적거동에 기초해 설명하고자 시도되었다. 기본적으로, 방사성은 l/4, l/l, 4/1(wt. NMP/wt. MCP)로 블렌드비를 달리 하면서 shear rate를 증가시켰을 때 등방성의 농도가 클 경우 급격한 점도 감소로 cohesive fracture의 원인이 됨을 관찰할 수 있었고 NMP가 증가할수록 탄성에너지 값이 전형적인 고분자의 거동처럼 응답하는 tan $\delta$값의 임계점이 고주파수영역으로 이전되어 최대값을 나타내었고 임계점보다 낮은영역에서 상대적인 크기는 NMP가 증가함에 따라 작아지는 현상을 관찰할 수 있었다.(중략)

  • PDF

중국에서의 전력기기에 대한 진단 기술

  • Yan, Z.
    • 전기의세계
    • /
    • v.45 no.4
    • /
    • pp.36-39
    • /
    • 1996
  • 1949년 이후, 중국에서의 전력사업은 급속히 증가하였으며, 1949년부터 1994년까지의 에너지 생산의 연평균성장률과 기존에 장치용량은 각각 12.68%와 10.97%이다. 하지만 중국의 많은 인구와 발전중인 산업의 엄청난 수요로 인하여 전기에너지의 부족은 여전히 중국의 가장 심각한 문제이다. 그래서, 서부에서 동부로 전력에너지를 전송하기 위해서도 더욱더 고압의 AC와 DC 전송 system 채택이 적절하다. 최근까지는 많은 500kV AC 계통과 하나의 .+-.500kV DC link를 운영하였다. 다른 한편으로는, 설치된 전력기기의 안전운전을 어떻게 보장 할 것인가가 또 다른 중요한 문제이다. 그러므로, 절연진단이 온 나라이 전력설비에 더 많은 관심이 기울어지고 있다.

  • PDF