• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.344-352
• /
• 2017

This study investigated the formability and appearance performance of 20 women's worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. The mechanical properties of the 20 fabrics were measured using KES-FB and FAST systems; subsequently, fabric formability (F) and total appearance value (TAV) were calculated and compared with a virtual 3-D simulation silhouette by i-designer CAD system. The fabric formability of the domestic fabrics, calculated by KES-FB system, was lower than foreign fabrics, which was assumed to be caused by the stiff tactile property. The result was similar to that of the FAST system. Good wearing performance of the foreign worsted fabric was assumed to be caused by high extensibility and the compressibility of the fabrics. The TAV's of the domestic fabrics were also lower than foreign fabrics. Both the correlation between TAV and formability by the KESFB system and the correlation between TAV and formability by FAST system showed a good correlation coefficient. Fabric formability between KES-FB and FAST systems also showed a good correlation. The 3-D simulation silhouette of the foreign fabric by i-designer CAD system appeared superior to the domestic one, and assumed to be attributed to the low extensibility of the weft direction, stiff bending and high shear properties of the fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.3
• /
• pp.544-559
• /
• 2018

Korea's traditional aesthetic criterion changed with a new makeup culture that followed the social change caused by modernization. Such transitional features are well seen in the cosmetic advertisements of the 1920's and 1930's. To investigate the cultural characteristics and aesthetic-criteria changes of makeup culture at this period, this thesis analyzes cosmetic advertisements carried in newspaper media of the 1920's and 1930's from an aesthetic perspective. This study found that after the late 1920's, more diverse tones were used for face-powder makeup, collapsing the visual, powder-focused makeup which had been considered criteria for beauty, in combination with smelling and tactile senses such as scent or touch. Domestic makeup had the highest value attached to basic skincare in terms of the aesthetic effect via powder makeup; however, Japanese makeup still stressed the importance of color. Besides, particular facts were found as to social significance of makeup acts such as powder users' age group, safety, superiority and rivals of products, and appeal for makeup popularization. This thesis demonstrates how traditional female beauty appears in powder advertisements in the modern period and how it is related to present-day female beauty.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.101-107
• /
• 2019

Purpose - The purpose of this study is to analyze the user requirements and developer requirements in virtual reality(VR), and suggest ways to increase the satisfaction of users who experience virtual reality. Specifically, focused on experience store of VR as a distribution retailer, user requirements were analyzed according to the results of previous research that the characteristics of Affordance, Presence, and Head Mounted Display (HMD) affect user satisfaction. Research, design, data, and methodology - Based on previous studies, in this study, we analyzed the importance of immerse, interaction, perception, and presence for the satisfaction of the user through the questionnaire, and the user experiences virtual reality (VR) The importance of HMD, Presence, Affordance, and experience satisfaction were analyzed. Based on this, we analyzed the user requirements and the developer requirements based on the questionnaires and interviews of the experts, starting from the user's desire or preference using QFD technique. Results - As a result of the analysis, the development factors that occupied a big part in the virtual reality field appeared to be visual. In detail, this showed that there was a lack of sense of presence for users. This should be improved. This paper shows that the requirements for visual, auditory, and tactile development are necessary. For the satisfaction of the users of virtual reality (VR) users, it is necessary to develop them according to their priority in consideration of importance and difficulty in the future. Conclusions - In this study, it was suggested that development according to priority should be considered, considering the difficulty level. Based on the results of this study, the following suggestions are made. First, we tried to search the list of user requirements as much as possible, but it is likely to change due to the development of VR technology. Therefore, it is necessary for developers to continually supplement user requirements with recent research literature. Second, development priorities according to difficulty level should be considered. This aspect should be considered in the actual VR development process, so if the numerical value of the difficulty is calculated, it should be presented in the research.

• Journal of the Korean Home Economics Association
• /
• v.44 no.10
• /
• pp.57-66
• /
• 2006

The purpose of this study was to evaluate the relationship between the tactile sensation and mechanical properties of towel. Six kinds of towels with different surface structure and fiber composition were used for this study. To evaluate the tactility of towel, 36 adjectives were collected and then 11 adjectives were selected. The subjective evaluation was examined by one to one comparative method and by blind test for estimating the only the sense of touch of the towels. Kawabata's Evaluation system for fabrics was used to measure the mechanical properties which are tensile, bending, shear, compression, surface, weight, and thickness of six towels. The results are as follows; First, surface structure of the towels had an effect on estimation the sense of touch. Pile surface was evaluated thicker, compacter, more cushiony, and more elastic. Waffle surface was evaluated knottier and rougher, and microfiber suede surface was evaluated softer and denser. Second, the highest value of the mechanical properties measured were G, 2HG, B, and SMD of 100% cotton 100% pile, WC, T, and W of elban loop pile, WT, 2HB, and LC of 100% cotton cut pile, RT and MIU of microfiber suede, and RC of microfiber waffle. Third, the 11 adjectives were correlated with more than one mechanical property. 'Knotty' and 'rough' were correlated with MMD and SMD, 'soft' were correlated with B, 2HB, MMD, and SMD. 'Thick', 'heavy', 'compact', and 'elastic' were correlated with WC, T, and W, 'cushiony' was correlated with WC. 'Stiff' was correlated with B and 2HB, 'dry out' was correlated with RT, WC, MIU, and T. 'Dense' was correlated with RT and SMD.

• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.29-36
• /
• 2010

This study was performed with 5 subjects and used three kinds of music and vibroacoustic stimuli wave based upon each kinds of music. Executing music stimulation, vibro tactile and acoustic wave stimulation to human body were performed. Then measured brain waves were analyzed under each condition including before stimulation, stimulation 1, and stimulation 2. Effects by stimulation results could be studied with experiments and summarized results are followings. 1. It may be concluded that effects on brain waves by music and vibroacoustic stimulation might differ under different situations such as stimulation types with vibroacoustic equipment, human body and mental conditions when measuring, etc.. 2. During stimuli by using music A, B, and C, the effect of $\alpha$ wave, $\beta$ wave, and SMR wave power values show same tendency to the subject c but music C had very different tendency during vibroacoustic stimuli. 3. During vibroacoustic stimuli by applying the signals of music C, because SMR wave power value was continually increased with consistency comparing to Bst, this can be estimated that an application of inducing mind concentration condition would be possible under relaxed body and mind conditions. 4. To secure data significance, all measured data need to be tested statistically whether data would be interrelated or not.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.25-31
• /
• 1981

One of the most important factors for successful endodontic therapy is an accurate length determination of physiological root apex. Some methods suggested for the measurement of root canal length, include digital-tactile sense and roentgenographic technique with measuring wire, scale and grid. But these methods do not derermine an accurate working length to physiological root apex. Recently electronic measuring devices are used to locate the physiological root apex in root canal length determination and these devices are accepted as an effective apparatus. The 89 patients (116 teeth, 144 canals) among the out-patients of Yonsei University Dental Infirmary, who had had an endodontic treatment in the Department of Operative Dentistry, were measured by the Root-Canal Meter$^{(R)}$ as an electronic device, and radiographs to determine the distribution and location of physiological root apex, then the following results were made: (1) Range of ${\pm}$1mm from the radiographic root apex were present in 88.88% (128 canals) of the subjects. (2) Physiological root apex and radiographic root apex were coincided in 31.94% (46 canals) of the subjects. (3) The actual length of the physiological root apex of the teeth were as follow; A : in the maxillary central incisor : 0.46mm B : in the maxillary lateral incisor : 0.44mm C : in the maxillary canine : 0.44mm D : in the maxillary 1st premolar : a) Buccal : 0.59mm b) Lingual : 0.34mm E : in the maxillary 2nd premolar : 0.54mm F : in the maxillary 1st molar : a) Mesio-buccal : 0.50mm b) Disto-buccal : 0.42mm c) Lingual : 0.56mm G : in the mandibular central incisor : 0.62mm H : in the mandibular lateral incisor : 0.45mm in the mandibular canine : 0.54mm J : in the mandibular 1st premolar : 0.47mm K : in the mandibular 2nd premolar : 0.34mm L : in the mandibular 1st molar : a) Mesio-buccal : 0.54mm b) Mesio-lingual : 0.31mm c) Distal : 0.37mm.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.33-40
• /
• 2013

Purpose: The purpose of this study was to evaluate the possibility to optimize the gated treatment delivery time and maintenance of stable respiratory by the introduction of breath with the assistance of auditory-visual-tactile sense. Materials and Methods: The experimenter's respiration were measured by ANZAI 4D system. We obtained natural breathing signal, monitor-induced breathing signal, monitor & ventilator-induced breathing signal, and breath-hold signal using real time monitor during 10 minutes beam-on-time. In order to check the stability of respiratory signals distributed in each group were compared with means, standard deviation, variation value, beam_time of the respiratory signal. Results: The stability of each respiratory was measured in consideration of deviation change studied in each respiratory time lapse. As a result of an analysis of respiratory signal, all experimenters has showed that breathing signal used both Real time monitor and Ventilator was the most stable and shortest time. Conclusion: In this study, it was evaluated that respiratory gated radiation therapy with auditory-visual-tactual sense and without auditory-visual-tactual sense feedback. The study showed that respiratory gated radiation therapy delivery time could significantly be improved by the application of video feedback when this is combined with audio-tactual sense assistance. This delivery technique did prove its feasibility to limit the tumor motion during treatment delivery for all patients to a defined value while maintaining the accuracy and proved the applicability of the technique in a conventional clinical schedule.

• Asia pacific journal of information systems
• /
• v.17 no.4
• /
• pp.97-112
• /
• 2007

Most traditional newspaper publishers provide online editions to counter the competition of online news providers. However, the relationship between the online and print editions of the same newspaper has not been clearly defined. Some see the online newspaper as a substitute, while others consider it a complement. A 2002 NAA online newspaper consumer survey indicated that one-third of its respondents said they were now using the print newspaper less. Others have argued that the online edition will not wipe out print consumption, and may even complement it. While the print edition offers particular advantages such as portability, less eye strain, and the tactile experience of a printed page, the online edition also offers specific advantages such as access to breaking news, continually updated information, access to old archives, etc. All these factors would tend to lower the degree of interchangeability between the products. However, recent empirical studies show that the online edition is a substitute for rather than a complement of the print edition. Still, to some print readers, the online edition provides additional value. In this paper, by capturing the two different aspects of online editions the substitute aspect and the additional value added aspect as well as other available online alternatives, we develop an analytical model to derive the optimal production and distribution strategies of both online and print editions. Confronting the "free versus fee" issue, we show that it is optimal to provide an online version of the print newspaper for free to non-print subscribers. However, the amount of free news content that the publishers need to put on the Web depends on the available alternatives on the online market. The "fee" and "free" options both have merits and demerits as well. If the publisher charges for the online version of the print newspaper, she can generate revenue from the fee charged to online readers. However, doing so will limit the size of the online audience and further reduce online advertising revenue. At the same time, by providing a high-quality online version and charging for it, the price of the print newspaper must stay low in order to lure high valued readers. On the contrary, if the publisher provides an online version of the print newspaper for free, she can obtain a larger audience for the online version. At the same time, by providing a low-quality online newspaper, the publisher can increase the print newspaper price to get more revenue from high valued offline readers, although no revenue is incoming from online version readers. Through systematic measuring of all the pros and cons, our analysis shows that the optimal option is not "fee" but "free."

• Science of Emotion and Sensibility
• /
• v.18 no.3
• /
• pp.17-24
• /
• 2015

This study investigated heat generation characteristics of knitted and woven intelligent garments made of ZrC imbedded yarns through thermal manikin measurement. These emotional and intelligent thermal characteristics by thermal manikin measurement were analysed and compared with light/thermal radiation experimental results. Surface temperature of ZrC imbedded woven and knitted fabrics by light/thermal radiation measurement was $4^{\circ}C$ and $2^{\circ}C$ higher than that of regular PET control fabrics, respectively. Clo value as heat generation characteristics of ZrC imbedded woven and knitted garments with light exposure was 0.14 and 0.08 higher than that of regular PET control garments, respectively. These results were attributed to the far-infrared thermal radiation from ZrC imbedded in the core part of the intelligent bi-component filament, which was verified by far-infrared emissive power ranged between $6{\mu}m$ and $20{\mu}m$ through FT-IR experiment and by inclusion of Zr through EDS ingredient analysis. However, compressibility of ZrC imbedded woven fabric was lower than that of regular PET one, and bending rigidity was higher than that of regular one, which resulted in a little stiff tactile hand property of ZrC imbedded fabric. We found that ZrC imbedded intelligent woven and knitted fabrics were applicable to the intelligent garment as a heat generation textile material by thermal manikin measurement.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.1
• /
• pp.62-75
• /
• 2022

In this study, experiential STEAM program using 3D printer was produced focusing on the content elements of 'solar' in the 2015 revised science curriculum, and in order to find out the effectiveness of the STEAM program, analyzed creative problem solving, STEAM attitude, and STEAM satisfaction by applying it to two middle school 77 students simple random sampled. The results of this study are as follows. First, a solar tactile model was produced using a 3D printer, and a program was developed to enable students to actively learn experience-oriented activities through visual impairment experiences. Second, in the response sample t-test by the difference in pre- and post-score of STEAM attitude tests, significant statistical test results were shown in 'interest', 'consideration', 'self-concept', 'self-efficacy', and 'science and engineering career choice' sub-factors except 'consideration' and 'usefulness / value recognition' sub-factors (p<.05). Third,, the STEAM satisfaction test conducted after the application of the 3D printer-based STEAM program showed that the average value range of sub-factors were 3.66~3.97, which improved students' understanding and interest in science subjects through the 3D printer-based STEAM program.