• 접착 및 계면
• /
• 제12권2호
• /
• pp.67-72
• /
• 2011

Acrylic pressure-sensitive adhesives are used in many different parts in the world. But acrylic acid in PSAs may occur unexpected results such as corroding adherends or producing by-products when applied within electronic devices. This study employed acrylic PSAs based on 2-ethylhexyl acrylate (2-EHA), 2-hydroxyethyl acrylate (2-HEA) and butyl acrylate (BA) with different coating thickness. There are two types of curing agents. One is methylaziridine derivative (MAZ) and the other is aluminum acetylacetonate (AlACA). This study examined the adhesion performance and curing behaviors using peel strength, probe tack and gel fraction. Also, the viscoelastic properties of acrylic PSAs were investigated from Advanced rheometric expansion system (ARES).

• Steel and Composite Structures
• /
• 제14권1호
• /
• pp.41-55
• /
• 2013

Fiber reinforced polymers (FRP) materials are increasingly being used for strengthening and repair of steel structures. An issue that concerns engineers in steel members which are retrofitted with FRP is stress experienced due to temperature changes. The changing temperature affects the interface bond between the FRP and Steel. This research focused on the effects of cyclical thermal loadings on the interface properties of FRP bounded to steel members. Over fifty tests were conducted to investigate the thermal effects on bonding between FRP and steel, which were cycled from temperature of $-11^{\circ}C$ ($12^{\circ}F$) to $60^{\circ}C$ ($140^{\circ}F$) for 21-36 days. This investigation consisted of two test protocols, 1) the tensile test of epoxy resin, tack coat, FRP and FRP-steel plate, 2) tensile test of each FRP compound and FRP with steel after going through thermal cyclic loading. This investigation reveals an extensive reduction in the composite's strength.

• 한국전문물리치료학회지
• /
• 제7권1호
• /
• pp.32-37
• /
• 2000

The purpose of this study is to determine the effects of exercise training on the strength and balance ability of the elderly. The results of this study are: 1) After 8 weeks exercise training, knee muscle strength showed a significant increment. 2) After exercise training, forward functional reach and balance index of KAT 2000 showed a significant increment. Results indicate that strengthening exercise can result in improved muscle strength and balance in the elderly. Further studies are required to show long-term effects of exercise training on the elderly.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.14-19
• /
• 1998

Increasing demand for high modulus high strength polymeric materials have drawn considerable interest in industry. Thermotropic liquid crystal polymers (TLCP), differing from lyotropic liquid crystal polymers, have excellent melt processability and mechanical property resulting from the high degree of molecular orientation under a shear flow field in the molten state with relatively low viscosity$\^$1,2/.(omitted)

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.38-44
• /
• 2007

환경문제의 대두에 따라 포름알데히드를 방산하는 접착제를 대신할 수 있도록 로진을 이용한 천연접착제를 개발하고자 한다. 경화속도와 접착물성을 향상시키기 위해 건조제의 배합에 따라 천연접착제를 제조하였다. 건조제의 배합에 따른 경화속도와 접착물성을 Texture Analyzer를 이용하여 얻어진 tack값과 single lap shear test를 통해 얻어진 접착력을 기반으로 평가하였으며, 외국에서 사용되고 있는 AURO, BioFa, Livos의 식물계 천연접착제와의 성능을 비교 분석하였다. 최적의 배합비는 Co 0.7 part, Zr 1.0 part, Ca 0.5 part, Activ8 0.1 part를 첨가하였을 때이며, 이 때의 접착력은 $93.2{\pm}19.1N/cm^2$의 수준에 도달하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.117-123
• /
• 2010

The objective of this research was executed to investigate the effect of molar ratio of formaldehyde to urea and melamine (F/(U+M)) of urea-melamine-formaldehyde (UMF) resin on bonding high and low moisture content veneers. For that purpose, UMF resin types with 5 different F/(U+M) molar ratios (1.45, 1.65, 1.85, 2.05, and 2.25) synthesized were used in present study. First, their curing behavior was evaluated by differential scanning calorimetry. Second, their adhesion performance in bonding high and low moisture content veneers was evaluated by probe tack and dry and wet shear strength tests. Curing temperature and reaction enthalpy decreased with the increase of F/(U+M) molar ratio. And the dry and wet shear strengthsof plywood manufactured from low moisture content veneers were higher than thoseof plywood manufactured from high moisture content veneers. Also, the maximum initial tack force on the low moisture content veneer was higher than that on the high moisture content veneer.

• 한국전문물리치료학회지
• /
• 제16권3호
• /
• pp.32-41
• /
• 2009

The purpose of this study was to suppose basis data the influence of different chair type and pelvic control on quadriceps muscle activity and strength during knee joint extension isometric exercise in hemiplegic patients. This research were investigated in ten healthy adults and tens hemipelgic patients. Surface electromyography (EMG) and Biodex system were used to collect kinematic data and muscle activity, respectively. Independent t-test, paired t-test and one-way repeated ANOVA were used to determine a statistical significance. The results showed as follows: (1) Posterior pelvic angles in healthy group and hemiplegic group were significantly different on isokinetic equipment (p<.05). (2) Different chair type and pelvic control on quadriceps muscle activity and strength were significantly different in hemiplegic patients (p<.05). From the result of this research, posterior pelvic angle control during knee joint extension isometric exercise in hemiplegic patients on isokinetic equipment is necessary to increase quadriceps muscle strength in hemiplegic patients.

• 접착 및 계면
• /
• 제10권3호
• /
• pp.134-140
• /
• 2009

분자설계를 통하여 측쇄를 변화시킨 아크릴공중합체를 합성하여 아크릴공중합체 점착제와 초박형웨이퍼와의 젖음성 및 점착물성을 조사하였다. 선형 아크릴공중합체를 에폭시계 Tetra-DX 가교제와 반응시켜 3차원 망상구조를 형성하고 가교의 영향을 조사하였다. 계면상호작용보다는 아크릴공중합체의 측쇄변화가 젖음성에 더 큰 영향을 미쳤다. 가교도가 증가할수록 probe tack, peel strength가 감소하는 경향을 나타냈다. 가교에 의해 SAFT 내열성이 증가하였지만 가교제의 함량이 증가하면 오히려 SAFT 내열성이 감소하였다.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.22-26
• /
• 2017

The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.181-187
• /
• 2016

Transparent acrylic pressure sensitive adhesives (PSAs) were successfully prepared by photopolymerization with 2-ethylhexyl acrylate (2-EHA) and 2-hydroxyethyl acrylate (2-HEA) as a default constituent and with isobornyl acrylate (IBOA) and N-(isobutoxymethyl)acrylamide (IBMA) as a variable constituent. The IBMA mole fraction effect in the acrylic PSAs was investigated on adhesion performances and the optical properties including 85/85 test as well as the characteristics (solid content, and molecular weight) of the PSA syrups were also investigated. Regardless increasing the IBMA mole fraction in the acrylic PSAs, the acrylic PSAs exhibited almost the same adhesion performance such as $180^{\circ}$ peel strength (~4.0 kg/25 mm) and probe tack (~0.27 kg). All the acrylic PSA samples also showed high transmittance (more than 91%), low haze (less than 1.0%) and low color-difference (less than 1.0) before and after 85/85 test.