• Proceedings of the Korea Society of Design Studies Conference
• /
• 한국디자인학회 2005년도 추계 학술발표대회 논문집
• /
• pp.10-11
• /
• 2005

• Journal of the Korean Society for Precision Engineering
• /
• 제27권7호
• /
• pp.94-100
• /
• 2010

This paper describes the design and evaluation procedure of an ultra-precision rotary table for freeform generating machined tools. Design of the thrust and journal hydrostatic bearings and experimental evaluation of the table were performed. To get the compact size and less lost motion direct drive servomotor with ultra precision encoder. From the considered design, following performance were confirmed by experiment. The total stiffness of the prototype rotary table was 483.6 $N/{\mu}m$ and 97.6 $N/{\mu}m$ for axial and radial direction, respectively. Rotational accuracy of the table was investigated by capacitive sensor and reversal measurement technique, and 0.10 ${\mu}m$ radial direction and 0.05 ${\mu}m$ axial direction of the rotational accuracy were confirmed. The micro resolution of the table was also investigated with displacement of capacitive sensor, and $0.5/10000^{\circ}$ of micro resolution was confirmed. Index accuracy of the table was evaluated by the autocollimator and polygon mirror, and the $\pm0.39$ arcsec accuracy and $\pm0.16$ arcsec repeatability of the table were confirmed. Those are under the general requirements of ultra precision rotary tables for freeform generating machined tools.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.9-11
• /
• 2006

This paper presents JPEG quantization table design using RD optimization and neural network. Using R-D optimization, quantization table with good performance can be obtained. However, it is time-consuming and difficult to adopt to embedded systems. In this paper, a new quantization table design method is proposed using R-D optimization and neural network. Neural network learns the quantization table obtained from R-D optimization and produces a quantization table for the Images. The proposed system is applied to Yale face data. From the simulation results, it has been shown that the proposed codec has better performance than JPEG.

• Journal of the Korea Furniture Society
• /
• 제25권4호
• /
• pp.288-296
• /
• 2014

The approach of using the structure of the Joseon Dynasty Zen tradition we design a piece of table for outdoor camping is a necessity in modern culture as continuing to develop this research. Analyzing outdoor and camping equipment according to the time change, we focus on the study table for outdoor camping can apply the structure of the elbow. Outdoor supply is also overlaid with the change, while changing in the picnic and camping camp sensibility that was taking advantage of the individuality of each of the general camp. However, it is a surface camp that Korean culture is not to build up the camp culture that has been fixed camp culture of the world in the only development, following the camp trend of European and American. In an attempt to adhere to the trend of Korea currently camped, camping outdoor products that apply the beauty of Korea with a combination of new modern representation tradition and our culture has designed research. I have designed the camp outdoor table based on the contents mentioned above. For the design of this time, it is now possible to use appropriately in accordance with the outdoor environment conditions that are designed to upright seat sharing table in the market tables for camping and to be divided into the seat and upright.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제10권1호
• /
• pp.143-152
• /
• 2002

European side impact analysis of an electric vehicle was done using the robust design method. In order to minimize VC as well as rib deflection, the injury response table which consists of rib deflection and VC response table has been introduced. The sensitivities and interactions are almost the same when it was compared with those of rib deflection and VC response table. Using internal energy of the factors, the starting time of dummy rib deflection and the contact average velocity, the internal energy and time-velocity response table were introduced. It is shown that the results of the new response tables have the similar characteristics to those of the Injury response table. It is suggested that the internal energy and time-velocity response table should be utilized to minimize injuries.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.175-178
• /
• 2004

This paper describes a new IP address lookup algorithm using a binary search on multiple balanced trees stored in one memory. The proposed scheme has 3 different tables; a range table, a main table, and multiple sub-tables. The range table includes $2^8$ entries of 22 bits wide. Each of the main table and sub-table entries is composed of fields for a prefix, a prefix length, the number of sub-table entries, a sub-table pointer, and a forwarding RAM pointer. Binary searches are performed in the main table and the multiple sub-tables in sequence. Address lookups in our proposed scheme are achieved by memory access times of 11 in average, 1 in minimum, and 24 in maximum using 267 Kbytes of memory for 38.000 prefixes. Hence the forwarding table of the proposed scheme is stored into L2 cache, and the address lookup algorithm is implemented in software running on general purpose processor. Since the proposed scheme only depends on the number of prefixes not the length of prefixes, it is easily scaled to IPv6.

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.947-955
• /
• 2000

This paper proposes an optimal design scheme to improve the muffler's capacity of noise reduction of the exhaust system by combining the Taguchi method and a fractional factorial design. As a measuring tool for the performance of a muffler, the performance prediction software which is developed by Oh, Lee and Lee (1996) is used. In the first stage of a design, the length and radius of each component of the current muffler system are selected as control factors. Then, the $L_{18}$ table of orthogonal arrays is adopted to extract the effective main factors. In the second stage, the fractional factorial design is adopted to take interactions into consideration, which the $L_{18}$ table of orthogonal arrays can not consider. For an optimal design, the $L_{27}$ table of orthogonal arrays with main and interaction effects is proposed and the noise factors such as temperature, background noise and humidity are analyzed for more efficient design simultaneously.

• Journal of the Korean Society for Precision Engineering
• /
• 제27권4호
• /
• pp.7-13
• /
• 2010

Linear motors are efficient mechanism that offers high speed and positioning accuracy. By eliminating mechanical transmission mechanisms, much higher speeds and greater acceleration can be achieved without backlash or excessive friction. However, an important disadvantage of linear motor system is its high power loss and heating up of motor and neighboring machine components on operation. Therefore, it is necessary to design moving table with high stiffness, high efficiency and light weight construction. This paper presents the development of moving table using composite material. In order to develop light weight construction of moving table, finite element analysis is performed to find best moving table construction and composite stacking sequence. NASTRAN and MINITAB were used as the optimizer. A prototype for the moving table using composite material was created.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.989-995
• /
• 2009

Smart Dining Table is an ongoing project in our Interaction Design Lab. It is a table top display designed to facilitate dining process. Smart Dining Table uses touchable interface to interact with users, providing a new, interesting and efficient experience in dining process. In GuangZhou, the south city of China, Yam Cha is a traditional and local way of entertainment in which normally elders gather together with friends or relatives to have tea and snack, and most importantly, to chat. Yam Cha has a long history in China, and Guangzhou has developed its own unique "Yam Cha" culture. In this paper, we discuss about previous research we did on Yam Cha in GuangZhou, and the approach we propose to manage and analyze issues related to dining table to help designing specific version of Smart Dining Table which can fit right into the Yam Cha process and cultural environment.

• Journal of the Korean Society for Precision Engineering
• /
• 제27권2호
• /
• pp.86-93
• /
• 2010

The tilting index table has attached to CNC machining center with 3axes, it can be improvement of its performance and its machining efficiency. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts, using the conventional machining center. In this study, structural analysis is carried out by FEM simulation using the commercial software ANSYS Workbench 11 to develop tilting index table using direct drive motor. The shape of the tilting index table obtained from the optimization was analyzed and compared with the initial model. Also, the initial model was modified based on the optimization model and the result was verified to have the acceptable improvement.