• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.372-385
• /
• 2022

In this study, the patterns expressed on nineteenth-century blue and white porcelain among Joseon white porcelain were selected as the material for the development of the car seat fabric design. It was intended to be applied to car seat design by incorporating Korea's own traditional patterns to fit modern sensibility. First, seven pieces of nineteenth-century blue and white porcelain were selected through the literature, and motifs were produced using adobe illustrator, a computer graphic program. Seven car seat fabric designs were developed according to the construction method and development method of the produced motif. Work 1 was designed to elicit a soft and feminine atmosphere using the peony pattern shown in Table 1-1. Work 2 aimed to express a luxurious atmosphere using the image of the mountain expressed in Table 1-2 as a design material. Works 3 was designed by freely arranging the letters of luck expressed in Table 1-3 to form a free and dynamic image. Work 4 was intended to express a stable and rhythmic atmosphere by horizontally arranging the images of the gently curved wings, tail, and rhythmical tail feathers of the phoenix expressed in Table 1-4. Work 5 was designed in a vertical arrangement using the patterns and silhouettes of the tiger's back expressed in Table 1-5. Work 6 was designed using the wave pattern expressed in Table 1-6 to replicate the rhythmic atmosphere. Work 7 was designed using the images of rocks, waves, and the sun in Table 1-7 to express a calm and antique atmosphere.

• Journal of radiological science and technology
• /
• v.46 no.4
• /
• pp.295-301
• /
• 2023

In addition to protocol adjustments during CT examinations, the height of the CT table can also affect image quality. Therefore, this study aimed to investigate the change in image quality depending on the height of the table in brain CT, which accounts for a large proportion of CT examinations, by measuring signal to contrast to noise ratio (CNR) and noise power spectrum (NPS) using the head phantom and evaluating them. The head phantom images were acquired using Philips Brilliance iCT 256. When the image was acquired, the table height was adjusted to 815, 865, 915, 965, 1015, and 1030 mm, respectively, and each scan was performed 3 times for each height. The CNR result showed the highest value at 965 mm, which is the height adjacent to the center of the head phantom. NPS showed the lowest NPS at 915 mm, the center of the head phantom in the low frequency region. From these results, it can be seen that the height of the table in CT examination is closely related to the image quality, and it can be seen the characteristics of image quality according to CT table through quantitative evaluation methods such as CNR and NPS.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.201-216
• /
• 2013

Ground penetrating radar (GPR) surveys were conducted in a sand tank model in a laboratory and at an alluvial field site to detect the groundwater table and to investigate the influence of saturation on GPR response in the unsaturated zone. In the sand tank model, the groundwater table and saturation in the sand layer were altered by injecting water, which was then drained by a valve inserted into the bottom of the tank. GPR vertical reflection profile (VRP) data were obtained in the sand tank model for rising and lowering of the groundwater table to estimate the groundwater table and saturation. Results of the lab-scale model provide information on the sensitivity of GPR signals to changes in the water content and in the groundwater table. GPR wave velocities in the vadose zone are controlled mainly by variations in water content (increased travel time is interpreted as an increase in saturation). At the field site, VRP data were collected to a depth of 220 m to estimate the groundwater table at an alluvial site near the Nakdong river at Iryong-ri, Haman-gun, South Korea. Results of the field survey indicate that under saturated conditions, the first reflector of the GPR is indicative of the capillary fringe and not the actual groundwater table. To measure the groundwater table more accurately, we performed a GPR survey using the common mid-point (CMP) method in the vicinity of well-3, and sunk a well to check the groundwater table. The resultant CMP data revealed reflective events from the capillary fringe and groundwater table showing hyperbolic patterns. The normal moveout correction was applied to evaluate the velocity of the GPR, which improved the accuracy of saturation and groundwater table information at depth. The GPR results show that the saturation information, including the groundwater table, is useful in assessing the hydrogeologic properties of the vadose zone in the field.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.150.2-150
• /
• 2001

• Fire Science and Engineering
• /
• v.10 no.1
• /
• pp.62-75
• /
• 1996

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.773-782
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.761-772
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.598-606
• /
• 2012

The aim of this study was to comparatively analyze the differences in Jinseol (ritual table-setting) and Jesu (ritual food) from the cultural perspective of ancestral ritual formalities regarding Bulcheonwijerye of Admiral Yi Sun-Sin, which is being held in Asan-hyeonchungsa shrine, Tongyeong-changnyangmyo and Namhae-chungyeolsa. The results are summarized as follows. A total of 32 types of Jemul (ritual food) in 6 rows in Asan-hyeonchungsa shrine, a total of 30 types of jemul in 6 rows in Tongyeong-changnyangmyo, and a total of 12 types of jemul in 2 rows in Namhae-chungyeolsa were prepared for the ritual table. In the Asan-hyeonchungsa shrine and Tongyeong-changnyangmyo, cooked foods have been used for jesu, whereas raw, uncooked foods have been used for jesu in Namhae-chungyeolsa. In the Asan-hyeonchungsa shrine, Gaeng (Kook) for liquid soup of Tang (stew) and Tang (5-tang) for the solid ingredient of stew have been prepared for a ritual table. In Tongyeong-changnyangmyo, fish Kook for Gaeng and So-tang (tofu stew) for Tang have been prepared for the ritual table. In Asan-hyeonchungsa shrine, Yukjeok (beef slices broiled on a skewer), Gyejeok (chicken jeok) and Eojeok (fish jeok) have been stacked together as Dojeok on a ritual table whereas in Tongyeong-changnyangmyo, Yukjeok, Sojeok and Eojeok have been placed on the ritual table as Pyunjeok (one by one). In Namhae- chungyeolsa, raw pork meat has been placed on the ritual table. As Po (a dried meat or fish), dried fish and dried seafood have been used in Tongyeong-changnyangmyo, whereas raw beef meat has been used in Namhae-chungyeolsa. Although Namul (cooked vegetables) and Mulkimchi (watery plain kimchi) are placed on ritual table for Asan-hyeonchungsa shrine, only Namul and Saengchae (raw vegetables) is used in Tongyeong-changnyangmyo and Namhae-chungyeolsa, respectively. Bulcheonwijerye for the same person, Admiral Yi Sun-Sin, has different characteristics according to the shrines. Accordingly, there is a need to preserve and succeed bulcheonwijerye of Admiral Yi because it is a traditional culture in ancestral rituals.

• Journal of Environmental Policy
• /
• v.8 no.1
• /
• pp.49-72
• /
• 2009

To analyze the direct and indirect $CO_2$ emission structure according to industries in Korea, a hybrid IO table quantifying the section of energy in the IO table is needed. However, the results of the recent researches revealed differences in the total amount of $CO_2$ emission by researchers in addition to significant standard deviation in industrial distribution. This study intends to make comparative analysis of the existing method of making an IO table for energy and environment and presents an improvement scheme to contribute to an improvement in calculation of the total amount of $CO_2$ emission and estimation of the emission by industries in Korea. For this purpose, division was made into use as raw materials of energy and that as fuel and a new hybrid IO table was made by removing confounding factors caused by the product tax and subsidies. As a result, the oil and coal industry emitted 5.2 times less $CO_2$ after removing energy inputted as raw materials from the transaction table than before. The amount of $CO_2$ emission estimated by using the IO table based on basic price was found to be 2.7% less than by using the IO table based on the producer price.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.217-225
• /
• 2007

This paper proposes the real-time hybrid shaking table testing methods to simulate the dynamic behavior of a soil-structure interaction system with dynamic soil stiffness by using only a structure model as the physical specimen and verifies their effectiveness for experimental implementation. Experimental methodologies proposed in this paper adopt such a way that absolute accelerations measured from the superstructure and shaking table are feedback to the shaking table controller, and then the shaking table is driven by the calculated motion of the absolute acceleration (acceleration feedback method) or the absolute velocity (velocity feedback method) of foundation that is required to simulate the dynamic behavior of a whole soil-structure interaction system. The shaking table test is implemented by reflecting the dynamic soil stiffness, which are differently approximated from the theoretical one depending on the feedback methods, on the shaking table controller to calculate soil part. The effectiveness of the proposed experimental methods is verified by comparing the response measured from the test on a foundation-fixed structural model and that obtained from the experiment of a soil-interaction system under the consideration in this paper and by matching the dynamic soil stiffness reflected on the shaking table controller with that identified using the experimentally measured data.