• 한국기계가공학회지
• /
• 제9권4호
• /
• pp.38-43
• /
• 2010

By generating 2-directional vibration in a xy plane of workpiece table, a newly developed micro drilling using 2-directional vibration was carried out. The vibration was produced by applying sinusoidal voltages to the orthogonally arranged piezoelectric materials built in the workpiece excitation table. Through the micro-drilling experiments using poly-carbonate and brass material, it was found that micro drilling using 2-directional vibration in a workpiece table could be an efficient method to enhance the form accuracy of machined workpiece by suppressing burr formation at both entry and exit region. A higher form accuracy could be obtained by increasing stiffness of feeding mechanism, decrease of geometric tolerance of combining jig, and development of high performance excitation table which generates amplified vibration at higher frequency.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.202-208
• /
• 2008

A 6 DOF Multi axis simulation table (MAST) is used to perform vibration and fatigue tests for parts or assemblies of automobiles, aircraft, or other systems. It consists of a table and 6 linear actuators. For its attitude control, we have to adjust the lengths of 6 actuators properly. The system is essentially a parallel mechanism. Three actuators are connected to the table directly and other three actuators are connected indirectly. Because of these, the MAST shows also a serial mechanism#s property: the inverse kinematics is more complicated than a pure parallel mechanism and each actuator can operate independently. The authors have performed a kinematics analysis of the 6 DOF MAST. We have presented an analytical and a numerical solution for the inverse and forward kinematics, and we have verified the solutions by a 3D CAD software.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.425-428
• /
• 1997

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective lapping work to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13pm of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07pm of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by the unskilled person after he experienced a little of preliminary machining. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.552-555
• /
• 1999

In this paper, a method for extracting the fingerprint regions and the table from fingerprint document which is the size of A4 including ten fingerprints images in a table is presented. The extraction of each fingerprint region is carried out by segmenting the foreground fingerprint region using a block filtering method and detecting its center point. The table extraction, by detecting a horizontal line using line tracing, and detecting a vertical line by its orthogonal equation. Here, T-shaped mask is proposed for finding the starting points of the vertical line intersecting horizontal line by the form of 'T'. Experimental results show above 95% correct rate of extracting the fingerprint region and table.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.124-130
• /
• 2000

For measuring out the submicron order straightness, a precision measuring device is developed in this paper. The device is constructed with a hydrostatic feed table and a capacitive type sensor which is mounted to the feed table. Straightness is acquired as substracting the motion error of feed table from the measured profile with probe. Motion error of feed table is simultaneously compensated upto 0.120${\mu}{\textrm}{m}$ of linear motion error and 0.20arcsec of angular motion error using the active controlled capillary. Reversal method and strai호t-edge is used fur estimating the measuring accuracy and from the experimental result, it is verified that the device has the measuring accuracy 0.030m. Also, through the practical application on the measurement of ground surface, it is confirmed that the device is very effective to measure the submicron order straightness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.15-17
• /
• 2006

This paper presents a new global intensity compensation method for extracting moving object in a visual surveillance system by compensating time variant intensity changes of background region. The method that compensates a little changes of intensity due to time variant illumination change and automatic gain control of camera is called global intensity compensation. The proposed method expresses global intensity change with a mapping table to describe complex form of intensity change while the previous method models this global intensity change with a simple function as a straight line. The proposed method builds the mapping table by calculating the cross histogram between two images and then by selecting an initial point for generating the mapping table by using Hough transform applied to the cross histogram image. Then starting from the initial point, the mapping table is generated according to the proposed algorithm based on the assumption that reflects the characteristic of global intensity change. Experimental results show that the proposed method makes the compensation error much smaller than the previous GIC method

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1512-1517
• /
• 2003

This paper presents the calibration for the parallel typed tilting table. The calibration system needs only simple sensing device which is a digital indicator to measure the orientation of a table. The calibration algorithm is developed by a measurement operator. It eliminates the concern about the poor parameter observability due to a large number of parameters of parallel-mechanism. This paper uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of a observation matrix. The number of identifiable parameters is examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a Parallel-typed Tilting Table and all the necessary kinematic parameters are identifiable.

• 한국식생활문화학회지
• /
• 제35권2호
• /
• pp.127-142
• /
• 2020

This research is the first known to introduce and analyze food-related content among the records left by George Clayton Foulk (1856-1893), a naval attache dispatched as part of a U.S. delegation to Korea during the Joseon dynasty in the 19th century. Sketches and memos by Foulk provide important clues in understanding the food culture during the late Joseon dynasty. By analyzing the types of foods, table composition, and intervals between serving the nine rounds of food from the rural government office, which Foulk ate during his local trip, he was able to confirm that there was a starter ('preliminary table' or 'hors d'œuvre') before the main table and that it was served before the main dish.

• 디지털콘텐츠학회 논문지
• /
• 제5권3호
• /
• pp.180-186
• /
• 2004

XML 전자상거래 분야 뿐만 아니라. 모든 학술분야와 산업분야에서 사용하고 있는 만큼, 표준화된 문서를 다루는 필수적인 기능을 가지고 있다. 또한 XML 자료를 관계형 데이터베이스 자료로 만들어 SQL 언어를 사용하여 자료 검색도 필요하다. XML과 관계 데이터베이스 간의 변환을 위해선 두 자료간의 매핑 관계가 필요하다. 그래서 본 논문에서는 문서 자체에서 항상 통일된 형식으로 문서를 작성하게 하고 문서를 읽을 때마다 이런 통일성을 자동적으로 검사하게 하는 DTD(Document Type Definition)를 사용해서 XML과 데이터베이스 간의 매핑 관계를 연구하고, 그 결과 XML Data를 Realation Database table로 매핑하는 매핑 설계도를 연구하였다.

• 한국소음진동공학회논문집
• /
• 제12권2호
• /
• pp.124-131
• /
• 2002

This paper presents the design of an active vibration suppression controller for an air-spring type vibration isolation table. Firstly, isolation system model is constructed considering the isolation table, attached equipment and voice-coil actuator. An active control system is designed based on frequency-shaped sliding mode control theory rewarding high frequency uncertainties with respect to attached equipments on the isolation table. Finally. the performance of the active isolation system is evaluated by simulation under some disturbance conditions which are transmitted from base structure of the isolation system.