• Title/Summary/Keyword: t-operation

Search Result 2,984, Processing Time 0.034 seconds

A Study on High Temperature Operation of SOI-MOSFET (SOI-MOSFET의 고온 동작에 관한 연구)

  • Choi, Chang-Yong;Moon, Kyung-Sook;Koo, Sang-Mo
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.21 no.8
    • /
    • pp.706-710
    • /
    • 2008
  • The substrate bias effect on the current level of SOI-MOSFETs for high temperature operation has been investigated. In this work, we demonstrate the current level of SOI-MOSFETs can be controlled at different temperatures by applying a control bias to the substrate, showing that all current levels below T=150$^{\circ}C$ can be adjusted to a constant current level. 2D numerical simulation results show that substrate bias effectively controls the current conduction; as the substrate bias effectively lower the potential of the channel, inversion carrier generation is effectively controlled and consequently a constant current conduction level is achieved up to T=150$^{\circ}C$. We also demonstrate that the device simulated in this work has same operation at any temperature below T=150$^{\circ}C$ through mixed mode simulation.

A Novel Sensing Circuit for 2T-2MTJ MRAM Applicable to High Speed Synchronous Operation

  • Jang, Eun-Jung;Lee, Jung-Hwa;Kim, Ji-hyun;Lee, Seungjun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.2 no.3
    • /
    • pp.173-179
    • /
    • 2002
  • We propose a novel sensing circuit for 2T-2MTJ MRAM that can be used for high speed synchronous operation. Proposed bit-line sense amplifier detects small voltage difference in bit-lines and develops it into rail-to-rail swing while maintaining small voltage difference on TMR cells. It is small enough to fit into each column that the whole data array on selected word line are activated as in DRAMs for high-speed read-out by changing column addresses only. We designed a 256Kb read-only MRAM in a $0.35\mu\textrm{m}$ logic technology to verify the new sensing scheme. Simulation result shows a 25ns RAS access time and a cycle time shorter than 10 ns.

A Study on Improvement of the Interface Control of NPP Construction and Operation Activities

  • Chung, Ku-Young;Lee, Woo-Ho;Lee, Jae-Hun
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 2005.05a
    • /
    • pp.1221-1222
    • /
    • 2005
  • Interface control activities during the nuclear power plant (NPP) construction and operation have been reviewed for enhancing the safety of NPP. The primary focus of the study is given on analysis of lessons learned from the recent significant events of Korean Standard Nuclear Power plant (KSNP), such as a series of break-off of thermal sleeves at YGN 5 & 6 and radioactivity leak at YGN 5, in respect of interface control. Based on the results of the analysis, this study recommends measures for the improvement of interface control among utility and technical supporting organizations (TSO), and suggests new regulatory systems, such as reporting of safety significant non-conformances, to effectively verify the adequacy of interface control activities during construction and operation of NPPs.

  • PDF

OLAP-based Big Table Generation for Efficient Analysis of Large-sized IoT Data (대용량 IoT 데이터의 빠른 분석을 위한 OLAP 기반의 빅테이블 생성 방안)

  • Lee, Dohoon;Jo, Chanyoung;On, Byung-Won
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2021.10a
    • /
    • pp.2-5
    • /
    • 2021
  • With the recent development of the Internet of Things (IoT) technology, various terminals are being connected to the Internet. As a result, the amount of IoT data is also increasing, and an index key that can efficient analyze the large-scale IoT data is proposed. Existing index keys have only time and space information, so if data stored in index tables and instance tables were queried using repetition or join operation, IoT data was embedded in the index key of the proposal to create OLAP-based big tables to minimize the number of repetitions or join times.

  • PDF

Effect of Peripheral Blood CD4 + CD25 + Regulatory T Cell on Postoperative Immunotherapy for Patients with Renal Carcinoma

  • Zhang, Chao-Hua;Huang, Yan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.17 no.4
    • /
    • pp.2027-2030
    • /
    • 2016
  • Objective: To investigate the effect of peripheral blood CD4 + CD25 + regulatory T cell on postoperative immunotherapy in patients with renal carcinoma. Methods: 38 patients with renal cell carcinoma were recruited, and 20 patients from the operation group purely underwent the radical nephrectomy therapy, 18 patients from the combined group successively underwent the radical nephrectomy therapy and IFN-${\alpha}$ adjuvant immunotherapy. Additionally, 12 healthy subjects were recruited in the same period of time and regarded as the control group. Flow cytometry was used to detect CD4 +, CD8 +, CD4 + CD25+ T lymphocyte subset content and the ratio of all parts in the pre-operative period, in the first post-operative week and in the third post-operative month, compare and analyze its variation trend. Results: The CD4+CD25+ T lymphocyte subset content of individual renal carcinoma patients was significantly higher than that of the control group, also increases with the progression in the tumor stage (P<0.05). The post-operative CD4 + CD25+T lymphocytes of individual operation group and combined group patients showed different degrees of increment, but the increment of the combined group was significantly lower than that of the operation group (P<0.05). For the combined group patients with less pre-operative CD4 + CD25+T lymphocytes, their levels would increase after the immunotherapy, while the pre-operative patients with more CD4 + CD25+ T lymphocytes were the opposite situation. Conclusion: The detection of peripheral blood CD4+CD25+ regulatory T lymphocyte subset can reflect the anti-tumor immune status of renal cell carcinoma patient body. It can contribute to predict the prognosis of immunotherapy and provide reference for the choice of renal carcinoma post-operative adjuvant immunotherapy.

IoT based Situation-specific Task Classification Algorithm (IoT 기반 상황 별 작업 분류 알고리즘)

  • Jeong, Dohyeong;Kim, Chuelhee;Lee, Jaeseung;Lee, Hyoungseon;Jung, Hoekyung
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2017.05a
    • /
    • pp.613-614
    • /
    • 2017
  • Recently, research on the automation of home IoT has been carried out in which IoT (Internet of Things) is applied inside the home. However, the conventional IoT automation system has a problem that the operation of the device is limited only by the threshold value of the sensor, so that the device may collide and interfere with each other and the efficiency of the Task is low due to the malfunction of the device. In this paper, we propose a Situation-specific task classification algorithm to solve these problems. Using the sensor threshold and the current date as classification values in the decision tree, the task according to the internal situation of the home is classified and the corresponding device is selected and proceeded. Therefore, it is expected that the users will be provided with a service that changes flexibly according to changes in the internal situation of the home, and the accuracy of the operation will be increased by reducing the malfunction of the device and the collision between the devices.

  • PDF

Secure and Scalable Blockchain-Based Framework for IoT-Supply Chain Management Systems

  • Omimah, Alsaedi;Omar, Batarfi;Mohammed, Dahab
    • International Journal of Computer Science & Network Security
    • /
    • v.22 no.12
    • /
    • pp.37-50
    • /
    • 2022
  • Modern supply chains include multiple activities from collecting raw materials to transferring final products. These activities involve many parties who share a huge amount of valuable data, which makes managing supply chain systems a challenging task. Current supply chain management (SCM) systems adopt digital technologies such as the Internet of Things (IoT) and blockchain for optimization purposes. Although these technologies can significantly enhance SCM systems, they have their own limitations that directly affect SCM systems. Security, performance, and scalability are essential components of SCM systems. Yet, confidentiality and scalability are one of blockchain's main limitations. Moreover, IoT devices are lightweight and have limited power and storage. These limitations should be considered when developing blockchain-based IoT-SCM systems. In this paper, the requirements of efficient supply chain systems are analyzed and the role of both IoT and blockchain technologies in providing each requirement are discussed. The limitations of blockchain and the challenges of IoT integration are investigated. The limitations of current literature in the same field are identified, and a secure and scalable blockchain-based IoT-SCM system is proposed. The proposed solution employs a Hyperledger fabric blockchain platform and tackles confidentiality by implementing private data collection to achieve confidentiality without decreasing performance. Moreover, the proposed framework integrates IoT data to stream live data without consuming its limited resources and implements a dualstorge model to support supply chain scalability. The proposed framework is evaluated in terms of security, throughput, and latency. The results demonstrate that the proposed framework maintains confidentiality, integrity, and availability of on-chain and off-chain supply chain data. It achieved better performance through 31.2% and 18% increases in read operation throughput and write operation throughput, respectively. Furthermore, it decreased the write operation latency by 83.3%.

A Study on the Minimum Safe Distance Under the Low Speed Sailing of T.S. HANBADA (실습선 한바다호의 저속 항해시 최소안전 이격거리에 관한 연구)

  • Park Young-Soo;Ji Sang-Won;Lee Yun-Sok;Jung Chang-Hyun;Jeong Jin-A;Jung Min
    • Journal of Navigation and Port Research
    • /
    • v.29 no.10 s.106
    • /
    • pp.833-838
    • /
    • 2005
  • This paper is to investigate the minimum safe distance between T/S Hanbada and a group of vessels participating in the event hosted by M broadcasting station who asked T/S Hanbada to keep a distance from $100m{\sim}500m$. The minimum safe distance was assessed by using ES Model which evaluates quantitatively the difficulty of shiphandling, and the simulation of marine traffic flow. As a result the minimum safe distance of T/S Hanbada moving at a speed of 2 knots turns out about 260m and is compared with the actual value.

OBLIQUE TRANSCRANIAL RADIOGRAPHIC ANALYSIS OF CHANGES IN CONDYLE POSITION FOLLOWING SAGITTAL SPLIT RAMUS OSTEOTOMY IN MANDIBULAR PROGNATHISM (측사위경두개방사선사진(Oblique Transcranial Radiograph)을 이용한 하악전돌증환자의 하악지 시상골절단술후 하악과두위치변화 분석)

  • Kwon, Tae-Geon;Jang, Hyun-Jung;Lee, Sang-Han
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.17 no.1
    • /
    • pp.32-45
    • /
    • 1995
  • This study was intended to evaluate condyle position and the relationship of condyle position change and post surgical relapse following the sagittal split ramus osteotomy for mandible setback in 25 patients by paired t-test and multiple regression analysis. We used oblique transcranial and cephalometric radiographs taken before operation, immediate after operation, and at least 6 months post operatively. 1. In oblique transcranial view, posterior joint space was decreased immediate after operation and increased 6 months after operation. To compare the measurement before and 6 months after operation, there was no statistically significant change in over all joint spaces(P>0.05). 2. The joint spaces changed under the 0.2mm were 30%, 0.2mm to 1.0mm were 60.7%, above 1.0mm were 9.3%. This result reveals that condyle position was relatively reproduced to pre-operative state. 3. Statistically, the amount of mandible set back didn't influence the post operative relapse(P>0.05). 4. Statistically, the amount of mandible set back didn't influence the condylar displacement(P>0.05), and the amount of joint space change didn't influence the post operative relapse.(P>0.05) The changes in joint space is in the standard tracing error or within the adaptive capacity of the individual, it was too small to influence the stability of surgery.

  • PDF