• Proceedings of the Korean Society for Language and Information Conference
• /
• 2002.02a
• /
• pp.271-280
• /
• 2002

A system to assist call routing task for telephone operators at the Directorate General of Telecommunications (DGT) in Taiwan is reported in this paper. The system was developed based on DGT organization profile with description of its six divisions instead of a corpus of recorded and transcribed call-routing dialogs. An acoustic module and an information retrieval module were built specifically for this task. The construction of IR module was based on term extraction and thesaurus discovery processes. By integrating acoustic and IR module, the system achieves satisfactory performance and provides a promising approach to call routing. Simulation results indicated that the proposed algorithm outperforms standard classification methods. A working system based on the proposed approach has been implemented and experimental results are presented.

• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.206-213
• /
• 2011

A flexible die, which is composed of a number of punches with adjusted heights to form a three-dimensional curved surface, is a crucial part of a flexible forming technology. In this study, the punch and control system of the flexible die were designed. The flexible die is divided into three modules, namely, punch, control and joint, and the corresponding modules were developed. The punch module materializes a three-dimensional forming surface by the control module, which is composed of an AC servo motor set and a linear guide. The joint module is necessary for the sequential motion between the servo motor set and the punch module. A sequential motion algorithm for the AC servo motor set, that uses the data of the punch relative heights, was also proposed. Finally, a flexible stretch forming test was carried out using the presently designed flexible die.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.836-844
• /
• 1991

PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.220-225
• /
• 2004

This paper presents a program for the automatic alignment of optical axes and evaluation of the optical filter performance which is a key technologies for the production of optical module. Recently the production of optical filter module mostly depends upon handwork or semi-automation. Moreover, they have used an expensive spectrum analyzer. In this work, we have developed an automatic alignment and evaluation program of optical filter module using photo detector and developed program for automation and cost reduction of the production of optical titter module.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.788-793
• /
• 2001

Finite element analysis was carried out to investigate the integrity and reliability of boiler module during sea transportation. The boiler module was supported by steel structure to relieve the instantaneous shock from oceanic wave and its primary parts were strengthened with several reinforcements. Finned tube walls which were used in the furnace wall were assumed as orthotropic plates having equivalent material properties. The bank tubes were also equivalently modeled in accordance with ASME B31.1 for the convenience of finite element modeling. The calculation results were compared with the yield stress of the material. In particular, the bank tube stress, which was evaluated by converting the calculated stresses in equivalent tubes into those in original tubes by using the ratio of diameter, was also examined with yield stress.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.71-72
• /
• 2006

In this study, automatic assembly and evaluation system fer phone camera module is conceptually designed. The designed core(Auto focus & UV curing, Image Test) equipments adopts a clustering mechanism and compactible structure using index table for minimum tact time. Using a ball screw actuator and absolute encoder in each axis, we can verifies the repeatability and position accuracy of system within ${\pm}3{\mu}m$. In result of simulation test, the proposed system is expected up to 30% in productivity than manual operation.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.318-321
• /
• 2000

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fie2, degree of uk terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for perform above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesize ${\alpha}$$\^$k/ generation module and control signal CSt generation module with A-cell and M-cell. Then, we propose the future research and prospects.

• Genomics & Informatics
• /
• v.2 no.4
• /
• pp.180-183
• /
• 2004

Comparative Statistic Module(CSM) provides more reliable list of significant genes to genomics researchers by offering the commonly selected genes and a method of choice by calculating the rank of each statistical test based on the average ranking of common genes across the five statistical methods, i.e. t-test, Kruskal-Wallis (Wilcoxon signed rank) test, SAM, two sample multiple test, and Empirical Bayesian test. This statistical analysis module is implemented in Perl, and R languages.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.197-202
• /
• 2007

In this study, the cooling characteristics of a liquid cooler using thermoelectric module was experimentally investigated. The experiment was conducted for various inner structures of liquid cooler (4 cases), hot fluid flow rates (0.15-0.25 L/min), number of T.E module (2, 4, 6 set), and the cooling water flow rates (200-600 cc/min) for both parallel and counter flow types. Among the results, better cooling performance geometry was selected. And experiment was also carried out to examine further enhancement of cooling performance by inserting coils (pitches: 0.2, 3, 6 mm) into the hot-fluid channel. Present results showed that the short serpentine type(case2) indicated the best cooling performance. In the case of coil pitch of 3 mm, the best cooling performance was shown, more than 10% increase of the inlet and outlet temperature difference, compared with the case of the cooler without coil. Consequently, the inserted coil pitch should be properly selected to improve cooling performance.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.26-39
• /
• 2017

The need for embedded devices to be able to exchange information with each other and with data centers is essential for the advent of the Internet of Things (IoT). Several existing communication protocols are designed for small devices including the message-queue telemetry transport (MQTT) protocol or the constrained application protocol (CoAP). However, most of the existing implementations are convenient for computers or smart phones but do not consider the strict constraints and limitations with regard resource usage, portability and configuration. In this paper, we report on an industrial research and development project which focuses on the design, implementation, testing and deployment of a MQTT module. The goal of this project is to develop this module for platforms having minimal RAM, flash code memory and processing power. This software module should be fully compliant with the MQTT protocol specification, portable, and inter-operable with other software stacks. In this paper, we present our approach based on abstraction layers to the design of the MQTT module and we discuss the compliance of the implementation with the requirements set including the MISRA static analysis requirements.