• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.57-64
• /
• 2007

In the paper, considers the design of a detection system, consisting of n identical detectors, to process the sum of spatially invariant signal fields $S_\jmath(t)$, an additive, homogeneous, spatially isotropic (in the array plane x). covariance_separable, and zero_mean Gaussian random noise field n(t, x). consisting of arrey receivers for use in optical communication through optimum turbulence atmosphers and covriance_circuit, staistical analysis through detection the maximum gain are compared with analysis theoretical analysis theoretical value and get through experimental measured value, as well the measured valus are confirmed to agreement joint Gaussian theoretical curves.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.612-617
• /
• 2008

In this present work, trimmed surface analysis for the 2D elasticity problem is presented. The main benefit of the proposed method is that no additional modeling for analysis of a trimmed surface is necessary. As the first attempt to deal with a trimmed surface in spline FEM, the information of the trimming curve and trimmed surface exported from CAD system is directly utilized for analysis. For this, trimmed elements are searched through employing projection scheme. For the integration of the trimmed elements, NURBSenhanced integration scheme which is used in NEFEM is adopted. The quadtree refinement of integration cell is performed for the complicated trimmed cases. The information of trimming curve is used for obtaining integration points as well as constructing stiffness matrix. The robustness and effectiveness of the proposed method are investigated by presenting various numerical examples.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.42-50
• /
• 2014

Lifting lugs are frequently used in shipyard to transportate and turn over blocks. As the shipbuilding technology develops, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the productivity. For the sake of economic as well as safe design of lug structure, more rigorous analysis is needed. In this study in order to investigate the strength characteristics of two type of lug, that is, D and T type lugs, non-linear strength analysis has been carried out to compare the ultimate strength characteristics of two types of lug varying in-plane and out-of-plane loading directions. Based on the present numerical analysis results, it can be drawn that T type lug is superior to D type lug from view points of ultimate strength and deformation.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.94-98
• /
• 1988

An improvement over the method of pore size distribution analysis has been made in this work. The improved method is based upon the idea of the micro pore analysis of Mikhail, Brunauer, and Bodor, and utilizes the V-t curve of nitrogen adsorption. Two pore models are assumed, and the deviation of the initial slope of the V-t plot is ascribed to the pore filling and to the adsorption on the wall of unfilled pores. The improved method of this work is very convenient in that the analysis starts from the small pore regions. The method of this work is however quite distinct from the similar V-t plot method proposed by Sellevold and Radjy. The proposed method is applied to a few adsorbents, and very satisfactory results are obtained. The cumulative surface area calculated by this method also agrees very well with those obtained by the BET plot or by the t-method.

• Journal of Veterinary Science
• /
• v.22 no.6
• /
• pp.88.1-88.6
• /
• 2021

Toxoplasma gondii consists of three genotypes, namely genotype I, II and III. Based on its virulence, T. gondii can be divided into virulent and avirulent strains. This study intends to evaluate an alternative method for predicting T. gondii virulence using hierarchical cluster analysis based on complete coding sequences (CDS) of sag1, gra7 and rop18 genes. Dendrogram was constructed using UPGMA with a Kimura 80 nucleotide distance measurement. The results showed that the prediction errors of T. gondii virulence using sag1, gra7 and rop18 were 7.41%, 6.89% and 9.1%, respectively. Analysis based on CDS of gra7 and rop18 was able to differentiate avirulent strains into genotypes II and III, whereas sag1 failed to differentiate.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.3
• /
• pp.121-127
• /
• 2015

The objective of this study is to suggest the water quality criteria of total nitrogen in order to efficiently manage the nutrient pollution in the stream. For this, correlations between water quality parameters were examined using the water quality data collected from the water quality monitoring network in the four rivers between 2003 and 2012. T-N showed positive correlations with T-P (0.636), COD (0.577), BOD (0.574), TOC (0.440), and SS (0.367). The statistical analysis including percentile analysis for the T-N and T-P concentrations was utilized to develop the water quality criteria of T-N. The feasibility of the suggested water quality criteria was evaluated by calculating the achievement rate to water quality target at the representative points in mid-watershed, then the draft water quality standard of T-N was suggested. The suggested water quality standard of T-N in the stream may be used to efficiently control the nutrient pollution in the public water body.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.3
• /
• pp.165-169
• /
• 2007

Prediction of fatigue duration is attainable from the analysis of the growth rate of the fatigue crack, and the property of the fatigue crack growth is determined by the calculation of the stress intensity factor. And the evaluation of the stress intensity factor, K comes from the stress analysis of the vicinity of crack tip of the continuum. This study describes a simple method to decide the stress intensity factor for the small crack at the sharp edge notches. The proposed method is based on the similarities between elastic stress fields of the notch tip described by two parameters, the stress concentration factor K, the radius of arc of the notch. And it is applicable to the analysis of the semi-elliptical penetration cracks and the edge notches.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9259-9264
• /
• 2014

Background: Previous studies concerning the association between the 5,10-methylenetetrahydrofolate reductase (MTHFR) C677T gene polymorphism with lung cancer in Asian populations have provided inconclusive findings. Aim: A meta-analysis was performed to investigate a more reliable association between MTHFR C677T polymorphism and lung cancer in Asians. Materials and Methods: A comprehensive search was conducted to identify all case-control studies of MTHFR polymorphisms and lung cancer in Asia, using odds ratios (ORs) with 95% confidence intervals (CIs) to assess the strength of any association. Results: Meta-analysis results suggested that the MTHFR C677T polymorphism contributed to an increased lung cancer risk in Asian populations (for T vs C: OR=1.11, 95%CI=1.0-1.23; for CT vs CC: OR= 1.1, 95%CI= 0.95-1.2 ; for TT+CT vs CC: OR=1.13, 95%CI=1.0-1.30; for TT vs CC: OR=1.25, 95%CI=1.01-1.30; for TT vs CT+CC: OR=1.16, 95%CI=1.0-1.36). Conclusions: MTHFR C677T polymorphism is significantly associated with lung cancer in Asians.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.69-78
• /
• 2002

This paper describes the analysis results for tensile behavior of tubular column to H-beam connection with T stiffeners. Using the elasto-plastic finite element method, analysis results are compare with experimental results. Parametric analyses with different size of T-stiffener have conducted to understand the stress distribution at the connections. Stress concentration in elastic region and PEEQ distribution in plastic region are plotted for different shape. The results of analysis were applied to design equations and were checked for the applicability of design equations.

• Korean Journal of Plant Resources
• /
• v.25 no.3
• /
• pp.329-338
• /
• 2012

Genus Taraxacum has been widely used as a folkloric medicine for treatment of diverse diseases. The genetic diversity and relationship among 32 accessions belonging to five Taraxacum species (T. mongolicum T. coreanum, T. coreanum var. flavescens, T. officinale and T. laevigatum) which collected from field, mountain, island and seaside of Korea were evaluated using ISSR markers. A total of 142 ISSR loci detected in the overall species were all polymorphic loci (100%) and interspecies polymorphisms obtained from Korean native and naturalized species were 98.2% and 94.5%, respectively. The genetic similarity matrix (GSM) among 32 accessions ranged from 0.025 to 0.860 with an average of 0.303. According to the clustering analysis, the Korean native species and naturalized species were divided two major clusters. In addition, the different species were divided into independent groups except for the T. coreanum and T. coreanum var. flavescens, and all the 32 accessions could be classified into 7 categories. The study findings indicate that Taraxacum accessions have a high genetic diversity and the dandelion accessions as breeding materials can be effectively utilized for the improvement of Taraxacum breeding.