• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.664-671
• /
• 2010

A genetic linkage map was constructed using 188 $F_9$ RILs derived from a cross between $Solanum$ $lycopersicum$ H7996 (resistant to bacterial wilt) and $S.$ $pimpinellifolium$ WVa700 (highly susceptible to bacterial wilt). The map consisted of 361 markers including 260 DArTs, 74 AFLPs, 4 RFLPs, 1 SNP, and 22 SSRs. The resulting linkage map was comprised of 13 linkage groups covering 2042.7 cM. The genetic linkage map had an average map distance between markers of 5.7 cM, with an average DArT marker density of 1/7.9 cM. Based on the distribution of anchor SSR markers, 11 linkage groups were assigned to 10 chromosomes of tomato except chromosomes 5 and 12. The DArT markers were distributed across the genome in a similar way as other markers and showed the highest frequency of clustering (38.8%) at ${\leq}$ 0.5 cM intervals between adjacent markers, which is 3 times higher than AFLPs (13.5%). The present study is the first utilization of DArT markers in tomato linkage map construction.

• Journal of Korea Foresty Energy
• /
• v.7 no.1
• /
• pp.11-21
• /
• 1987

To estimate the biomass, net production and nutrient distribution of Pinus Koraiensis and Quercus mongolica stand, experimental plots located in Kwangju of Kyonggi-do were selected. Ten sample trees selected account of DBH distribution were felled and the diagram of oven-dry weight distrubution of leaves, branches and stems for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the variable of $(DBH)^2$ H obtained. The standing crops were estimated to be as much as 152.07 and 156.02 tons of dry matter per hectare in P. koraiensis and Q. mongolica stand respectively. The net production was estimated as 24.66 and 20.35t/ha$\cdot$yr and the net assimilation rate was 1.90 and 3.42kg/kg$\cdot$yr in same order. Particulary large proportions of nitrogen. calcium and magnesium were found in soil of P. koraiensis stand, phosphours and potassium in overstory of it. At Q. mongolica stand, large proportions of nitrogen. phosphorus. potassium and magnesium were found in soil and calcium in overstory. The amounts of litter fall was 4.013t/ha$\cdot$8 months in P. koraiensis stand and 3.490t/ha$\cdot$8 months in Q. mongolica stand.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.1-6
• /
• 1999

SpeROD, the optical design program. is developed far specular reflectors of fluorescent luminaries. SpeROD can save much tirre when to design specular reflectors. SpeROD calculates conditions 2-dimensionally. The conditions for designing reflectors considered in this program are the intensity distribution, reflector type, and Tangent Spiral Design method. Using SpeROD, uniform intensity distribution type and bat-wing type reflectors are simulated in this paper, and alrrnn(T8) diarreter fluorescent lamp and lmnm width reflector are used for the setting. The sarre setting was simulated in FIElD, the intensity distribution prediction program. and the' result represented the intensity distribution and the efficacy simulated in SpeROD were satisfactory.actory.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.29-38
• /
• 2018

It is the approach of embedded system design that analyzes COS(Cut Out Switch) failure in the power distribution and an instantaneous breakdown of power distribution supply could cause the weakness of industrial competence and therefore we need to feed the stable power distribution with developing the technology of open-source embedded system. In this paper, we apply the LoRa technology which is the Internet of Things(IoT) protocol for low data rate, low power, low cost and long range sensor applications. We designed the hardware and software architecture setup and experimented the embedded system with network architecture and COS monitoring system including accelerometer for detecting the failure of distribution line and sensing the failure of its fuse holder by recognizing the variation and collision and afterwards sending the information to a gateway. With experimenting we designed the embedded platform for sensing the variation and collision according to the COS failure, monitoring its fuse holder status and transferring the information of states with LoRa technology.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.1
• /
• pp.7-16
• /
• 2009

The purpose of this study was to evaluate current packaging modules and design the most acceptable packaging module for domestic and international distribution systems. An optimum packaging module can reduce package costs as well as total distribution costs such as transport, materials handling and warehouse costs. Three different sizes of packaging modules, namely U-type($600{\times}500\;mm$), K -ype($550{\times}366\;mm$) and I-type($600{\times}400\;mm$), were evaluated in terms of the area efficiency and MOEs(measures of effectiveness) for the T-11($1100{\times}1100mm$) and T-12($1,200{\times}1,000\;mm$) pallets. The results showed that the U-type module could fit very well for both pallets and the area efficiency of each module was more than 99 percents. Area efficiency of K-and I-type modules was greatly affected by the pallet footprint dimensions. U-type module also performed better result from MOEs evaluation. Twenty sub-multiple sizes derived from the U-type module were suggested for the future development of the Korean and ISO standards on dimension of transport packages.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1925-1929
• /
• 2007

This paper is studied on a novel Electric Safety Protection Device (ESPD) of high speed for incapable operation of Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB) using the low voltage distribution line. The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device (RCD), that is ELB and MCCB, of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this research development is proposed to a novel ESPD of high speed to trip of distribution line on electric arc or spark due to electrical fire. Some experimental results of the proposed ESPD are confirmed to the validity of the analytical results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.7
• /
• pp.424-429
• /
• 2004

The 4-probe method with a voltage tap on terminals has been used for the measurement of the critical current of multi-strand high-T$_{c}$ superconducting(HTS) cables. And the critical current of cables is obtained as the measured total current divided by the number of conductor when the terminal voltage exceeds the predetermined criterion of critical current. However, because of the non-uniform current distribution due to the different critical current, shapes, and other characteristics of each conductor, this is not applicable method to the multi-strand HTS cable. To determine the critical current of multi-strand HTS cable, the critical current of each conductor must be measured with different method. h this paper, the current distribution and the critical current of each conductors in multi-strand cable were measured with specially made Pick-up coils and voltage taps. It is presented that the real critical current of multi-strand is smaller than sum of each conductors. The main cause of non-uniform current distribution is the difference between the resistances appeared in each HTS wires.s.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.47.1-47.1
• /
• 2011

We studied the evolution of the two mass components system with NFW initial density distribution by direct integration of the Fokker-Planck equations. The low mass component is regarded the dark matter particles while the high mass component is assumed to be conglomerates of baryonic matter in order to depict the 'stars'. While the true mass ratio between these two types of particles should be extremely large, our adopted mass ratio is about 1000 beyond which the dynamical evolution and density distribution tend to converge. Since the dynamical evolution is dominated by the dynamical friction, the high mass component slowly moves toward the central part, and eventually undergoes the core collapse. The system reaches the core-collapse at about $7.1{\times}10^{-3}$ $t_{fh}$ in NFW models, where $t_{fh}$is the dynamical friction time at half-mass radius. The distribution of the high mass component is well fitted by the Sersic profiles or modified Hubble profile when the mass segregation is established. From these results, the surface brightness of elliptical galaxies may be explained by the high mass component experiencing dynamical friction by the dark matter particles. In order for the mass segregation to be effective within Hubble time, the mass of the luminous component should be greater than $10^5M_{\bigodot}$.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.93-96
• /
• 2015

Commercial coal gasifiers typically use entrained flow type reactors, but have unique features in terms of reactor shape, gasifying agent, coal feeding type, ash/slag discharge, and reaction stages. The MHI gasifier is characterized as air-blow dry-feed entrained reactor, which incorporates a short combustion stage at the bottom and a tall gasification stage above. This study investigates the flow and reaction characteristics inside a MHI gasifier by using computational fluid dynamics (CFD) in order to understand its design and operation features. For its pilot-scale system at 200 ton/day capacity, the distribution of coal and air supply between the two reaction stages was varied. It was found that the syngas composition and carbon conversion rate were not significantly influenced by the changes in the distribution of coal and air supply. However, the temperature, velocity and flow pattern changed sensitively to the changes in the distribution of coal and air supply. The results suggest that one key factor to determine the operational ranges of coal and air supply would be the temperature and flow pattern along the narrower wall between the two reaction stages.

• Archives of Pharmacal Research
• /
• v.26 no.9
• /
• pp.763-767
• /
• 2003

The differences in pharmacokinetic behavior and tissue distribution of verapamil and its enantiomers were investigated in rats. In high-performance liquid chromatographic method, an achiral ODS column (150 mm $\times$ 4.6 mm i.d.) with the mobile phase consisting of methanol-water (73:30, v/v) was used for the determination of the concentration for racemic verapamil, and a Chiralcel OJ column (250 mm$\times$4.6 mm i.d.) with the mixture of n-haxane-ethanol-triethylamine (85:15:0.2, v/v/v) as mobile phase was used to determine the concentrations of verapamil enantiomers. A fluorescence detector in the analytical system was set at excitation and emission wavelengths of 275 nm and 315 nm. The differences between enantiomers were apparent in the pharmacokinetics in rats. The area under the concentration-time curve (AUC) of S-(-) verapamil was higher than that of R-(+) verapamil. The half-distribution time ($T_{1/2(\alpha)}$) of S-(-) verapamil which distributing to tissue from blood was shorter than that of R-(+) verapamil, but the elimination half-time ($T_{1/2(\beta)}$) was longer in rat following oral administration of racemic verapamil. At 1.3 h after oral administration of racemic verapamil, however, there were no significant differences between enantiomers for the distributions in major tissues such as heart, cerebrum, cerebellum, liver, spleen and kidney.