• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.212-219
• /
• 2012

This study focus on what methods of MOT are needed and utilized to solve a technical problem in the MOT leading company. We first classified the MOT methods by project life cycle and R&D job quality based on the several discussion with working group. In order to study, the survey was carried out by 168 experts working on MOT practices. Our main research findings are as follows. The level of utilized MOT methods was above average because MOT sector was beginning to represent an increasing share of total R&D business. But the satisfaction level on the MOT majors was below average. The more utilized MOT methods in practices were 'environment analysis and opportunity research,' 'business feasibility,' 'roadmapping,' 'portfolio,' 'technology tree,' 'scheduling,' 'risk management,' 'six sigma,' 'design of experiment,' 'quality control,' 'cost analysis' etc. And the subjects of product realization process were also needed to MOT practice such as 'design for reliability,' 'design for cost,' 'design for performance,' 'design for safety' deeply involved to product quality. Finally, the capability requested to University students were 'problem define and solving,' 'technology planning and strategy,' 'creative thinking.'

• Journal of Engineering Education Research
• /
• v.20 no.3
• /
• pp.32-41
• /
• 2017

The $4^{th}$ industrial revolution refers to an era where machines capable of outperforming humans are created. In light of the 4th industrial revolution, university students are demanded problem solving abilities, critical thinking abilities, and problem discovering abilities as general and basic abilities. The need for changes in the university level communication education for engineering students remains imperative in this constantly changing social environment. The era where education is conducted only in classrooms is over. This paper discusses the need for diversified education such as the integration of online and offline education, the reinforcement of learning outside of the classroom as well as an education model that transcends formal and informal education such as games and activities that induce self-learning, both intentional and non-intentional learning, and the utilization of mass media and social networking systems. Through providing an education model that assesses and utilizes the data gained from the learning process provided above, this paper widens the perception of future education methods in the 4th industrial revolution.

• Smart Structures and Systems
• /
• v.19 no.5
• /
• pp.513-521
• /
• 2017

The purpose of this paper is to study the capabilities of the impulse response method in length and flaw detecting for concrete piles and provide a suggested method to find small-size flaws in piles. In this work, wavelet transform is used to decompose the recorded time domain signal into a series of levels. These levels are narrowband, so the mix of different dominant bandwidths can be avoided. In this study, the impulse response method is used to analyze the signal obtained from the wavelet transform to improve the judgment of the flaw signal so as to detect the flaw location. This study provides a new way of thinking in non-destructive testing detection. The results show that the length of a pile is easy to be detected in the traditional reflection time or frequency domain method. However, the small flaws within pile are difficult to be found using these methods. The proposed approach in this paper is able to greatly improve the results of small-size flaw detection within piles by reducing the effects of any noise and clarifying the signal in the frequency domains.

• International Journal of Contents
• /
• v.4 no.1
• /
• pp.20-25
• /
• 2008

The development of communication technology and the spread of computers and internet have affected to the field of education. In this paper, we design a learning process with LAMS to make the new education environment which is required in an information age. We made the learning environment with LAMS which develops the learner's algorithmic thinking faculty on some sorting algorithm, especially such as selection sort, bubble sort and insertion sort algorithm. In addition, we analyse the effectiveness of the learning environment. The designed contents were applied to elementary school students' learning and a questionnaire survey was conducted after a learning course. The research of the questionnaire shows that the learning system using LAMS motivates a learner for learning and provides a convenient learning environment.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.4
• /
• pp.1-6
• /
• 2015

Due to unique characteristics of small construction companies, safety management is comprised of complex problems. This paper aims to better understand the complexity and dynamics of safety management in small construction companies. A system dynamics (SD) model was built in order to capture the causal interdependencies between factors at different system levels (regulation, organization, technical and individual) and their effects on safety outcomes. Various tests were conducted to build confidence in the model's usefulness to understand safety problems facing small companies from a system dynamics view. A number of policies were analyzed by changing the value of parameters. The value of a system dynamics approach to safety management in small construction companies is its ability to address joint effects of multiple safety risk factors on safety performance with a systems thinking perspective. By taking into account feedback loops and non-linear relationships, such a system dynamics model provides insights into the complex causes of relatively poor safety performance of small construction companies and improvement strategies.

• Korean System Dynamics Review
• /
• v.12 no.1
• /
• pp.131-153
• /
• 2011

The purpose of this study is to explore the applicability of the causal maps for estimating creativity. This study assumes that fluency, flexibility, originality and elaboration are elements of creativity; and there are common characteristics between systems and creative thinking. For this study, 30 students from the 5th grade create causal maps which are consisted of the contents of 'the water cycle in the earth'. The causal maps are analyzed and evaluated by focusing on the characteristics of creativity. In way of the marking causal maps based on creativity, each word is scored as 1 point on the basis of 30 points for fluency. Each word which is linked more than one word is scored 3 points for flexibility, but the maximum points are limited as 35 points. In originality, if it is approved each word is worthy as well as originality, it is scored as 10 points on the basis of 40 points. Lastly, each number of cycle loops is scored as 15 points for elaboration, and the maximum scores are limited as 45 points. As is stated above, the limiting of the maximum scores are designed based on corresponded to 10% students of participators. In the result of this study, the students' scores of evaluating creativity applied causal maps show similar patterns from relative point of view to the other results which were evaluated the creativity by credible organ. Consequently, it is recognized that the causal maps have the possibility of being able to estimate quantitatively the creativity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.565-568
• /
• 2002

A lot of rotating machines are being used in the industrial world and electric motor and generator take the most part of it. When it comes to the electric motor and generator, we can not help thinking about the eddy current because it brings a loss of electric and can be a important reason of the heat generation. To attenuate eddy current. laminated silicon steel sheets are being used in general. Especially, laminated rotor is being used for rotating part of the electric motor and generator and it decreases electrical loss and heat generation but we can be faced with another problem. In general, most of the motor and generator can be normally operated under 3600rpm because they are designed to have the first critical speed more than that speed. But nowadays, they should be operated more than the first critical speed as usual with the trend of high speed. large scale and high precision in industrial world. The critical speed can be determined from the inertia and stiffness for the rotor and bearing of rotating systems. The laminated rotor stiffness can be hardly determined because it can be derived a lot factors for instance rotor material and shape. lamination material and shape. insulation material. lamination force and so on. In this paper, the change of the natural frequency of the motor was examined with the change of the lamination force as an experimental method.

• Journal of Community Nutrition
• /
• v.5 no.4
• /
• pp.209-217
• /
• 2003

The food and nutrition system is a network of processes linking agriculture, food, eating, nutrition, and health. The system includes a series of nine stages (production, processing, distribution, acquisition, preparation, consumption, digestion, transport, and utilization) and two types of contexts (biophysical and sociocultural). Analysis of whole food and nutrition systems provides information about the structure and processes involved in the complete scope of food and nutrition, assisting in the identification of ″upstream″ influences and ″downstream″ consequences in the system. The current analysis gathered existing data about the food and nutrition system in South Korea from public sources and professional publications, and interpreted that information to consider how different elements of the system contribute to health. The findings revealed that South Korea has substantial domestic food production and processing supplemented by imports, widespread food distribution in markets and a growing number of Korean and Western restaurants, a relatively low percentage of household income spent on food, growing use of new food preparation methods such as microwave ovens, a rice/vegetable/fish based three-meal consumption pattern, few recorded digestive problems, increasing calorie storage as body fat, and a relatively low chronic disease prevalence compared to other developed societies. Examination of the full scope of the food and nutrition system provides a broad perspective using whole system thinking that can identify potential strategies for future research and intervention.

• Korean System Dynamics Review
• /
• v.14 no.3
• /
• pp.135-163
• /
• 2013

This study aims to analyze the feedback loops and policy simulation of price fluctuation of Korean Cattle. The Korean Cattle market shows the 'Cycle of Beef' since 1970. In general, the market for agricultural commodities exhibit repeated cycles of prices and production. Why Beef products market in Korea shows the fluctuation of cattle and beef price repeatedly for forty years? To find an answer, this paper explores the feedback structure of the dynamics of the beef market by the systems thinking and build a stock-flow diagram model for the simulation of future behavior of the market sector of the Cattle. The dynamic simulation model was developed to identify and analyze the cyclical behavior among many variables, which is the number of cattle (calves, cow, etc.), the price of cattle, the demand for beef, the desirable number of cattle, slaughter, etc. The results of this study demonstrate that dominant feedback loops between the number of cattle and livestock prices. The demand for Beef and slaughter with time delay, also the results of the simulation to explain the persistence of future price fluctuations and actions meat market until 2025.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.267-275
• /
• 1998

As social and economic environments rapidly change, all enterprises are struggling for the 21C. K company, a motor company, is building a new production system by one way of paradigm shift to get the competitive power in the market. This system includes concepts of the thinking shift from maker's view to consumers' view when it makes cars. Simultaneously, K company has been applying another new method 'Interchanges of Different Section of Industry' to make more competitive vendors since 1996. The old method, used until 1995, had worked well and gained lots of effects during the reform activities. But after the technical supervisors from K company had left almost everything went back to the starting point in the vendor company. The major causes of this phenomenon are that there were no ‘structure’ to maintain the reforming activities. We have confirmed that ‘Interchanges of Different Section of Industry’ is a good way to let this ‘structure’ exist continuously. After we compared and analyzed merits or demerits of this system through the experience of applying it to a vendor C, we have suggested more progressive method by strengthening the merits and removing the demerits.