• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.96-103
• /
• 2023

Generally, human stampedes and crowd collapses occur when people press against each other, causing falls that may result in death or injury. Particularly, crowd accidents have become increasingly common since the 1990s, with an average of 380 deaths annually. For instance, in Korea, a stampede occurred during the Itaewon Halloween festival on October 29, 2022, when several people crowded onto a narrow, downhill road, which was 45 meters long and between 3.2 and 4 meters wide. Precisely, this stampede was primarily due to the excessive number of people relative to the road size. Essentially, stampedes can occur anywhere and at any time, not just at events, but also in other places where large crowds gather. More specifically, the likelihood of accidents increases when the crowd density exceeds a turbulence threshold of 5-6 /m². Meanwhile, festivals and events, which have become more frequent and are promoted through social media, garner people from near and far to a specific location. Besides, as cities grow, the number of people gathering in one place increases. While stampedes are rare, their impact is significant, and the uncertainty associated with them is high. Currently, there is no scientific system to analyze the risk of stampedes due to crowd concentration. Consequently, to prevent such accidents, it is essential to prepare for crowd disasters that reflect social changes and regional characteristics. Hence, this study proposes using digital topographic maps and crowd-density risk simulations to develop a 3D model of the region. Specifically, the crowd density simulation allows for an analysis of the density of people walking along specific paths, which enables the prediction of danger areas and the risk of crowding. By using the simulation method in this study, it is anticipated that safety measures can be rationally established for specific situations, such as local festivals, and preparations may be made for crowd accidents in downtown areas.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.35-42
• /
• 2022

The N-value from the Standard Penetration Test (SPT), which is one of the representative in-situ test, is an important index that provides basic geological information and the depth of the bearing layer for the design of geotechnical structures. In the aspect of time and cost-effectiveness, there is a need to carry out a representative sampling test. However, the various variability and uncertainty are existing in the soil layer, so it is difficult to grasp the characteristics of the entire field from the limited test results. Thus the spatial interpolation techniques such as Kriging and IDW (inverse distance weighted) have been used for predicting unknown point from existing data. Recently, in order to increase the accuracy of interpolation results, studies that combine the geotechnics and deep learning method have been conducted. In this study, based on the SPT results of about 22,000 holes of ground survey, a comparative study was conducted to predict the depth of the bearing layer using deep learning methods and IDW. The average error among the prediction results of the bearing layer of each analysis model was 3.01 m for IDW, 3.22 m and 2.46 m for fully connected network and PointNet, respectively. The standard deviation was 3.99 for IDW, 3.95 and 3.54 for fully connected network and PointNet. As a result, the point net deep learing algorithm showed improved results compared to IDW and other deep learning method.

• Analyses & Alternatives
• /
• v.2 no.1
• /
• pp.31-69
• /
• 2018

This study examines the role of science in resolving trade disputes. After the Great East Japan Earthquake of 11 March 2011 that not only jeopardized the people of Japan, but also put the safety of an entire region at risk, the Republic of Korea (Korea) has imposed import bans as well as increased testing and certification requirements for radioactive material on Japanese food products. Japan has challenged these restrictions at the World Trade Organizations Dispute Settlement Body (DSB). This study aims to explain how international trade agreements and previous DSB rulings have dealt with different scientific viewpoints provided by confronting parties. In doing so, it will contrast the viewpoints espoused by Korean and Japanese representatives, and then analyzes the most similar case studies previously ruled on by the DSB, including the case of beef hormones and the case of genetically modified crops including biotech corn, both between the United States and the European Communities (EC). This study finds that science is largely subordinate to national interests in the case of state decision-making within the dispute settlement processes, and science has largely been relegated to a supportive role. Due to the ambiguity and lack of truly decisive decisions in the Appellate Body in science-based trade disputes, this study concludes that the Appellate Body avoids taking a firm scientific position in cases where science is still inconclusive in any capacity. Due to the panel's unwillingness to establish expert review boards as it has the power to do, instead favoring an individual-based system so that all viewpoints can be heard, it has also developed a system with its own unique weaknesses. Similar to any court of law in which each opposing party defends its own interests, each side brings whatever scientific evidence it can to defend its position, incentivizing them to disregard scientific conclusions unfavorable to their position. With so many questions that can arise, combined with the problems of evolving science, questions of risk, and social concerns in democratic society, it is no wonder that the panel views scientific information provided by the experts as secondary to the legal and procedural issues. Despite being ruled against the EC on legal issues in two previous cases, the EC essentially won both times because the panel did not address whether its science was correct or not. This failure to conclusively resolve a debate over whose science is more scientific enabled the EC to simply fix the procedural issues, while continuing to enforce trade restrictions based on their scientific evidence. Based on the analysis of the two cases of disputes, Korea may also find itself guilty of imposing an unwarranted moratorium on Japan's fish exports, only to subsequently pass new restrictions on labelling and certification requirements because Japan may have much scientific evidence at its disposal. However, Korea might be able to create enough uncertainty in the panel to force them to rule exclusively on the legal issues of the case. This will then equip Korea, like the EC in the past, with a way of working around the ruling, by changing whatever legal procedure they need to while maintaining some, if not most, of its restrictions when the panel fails to address its case on scientific grounds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.765-778
• /
• 2008

Performance Profiles are essential to predict the performance variation over time for the bridge management system (BMS) based on risk management. In general, condition profiles based on experts opinion and/or visual inspection records have been used widely because obtaining profiles based on real performance is not easy. However, those condition profiles usually don't give a good consistency to the safety of bridges, causing practical problems for the effective bridge management. The accuracy of performance evaluation is directly related to the accuracy of BMS. The reliability of the evaluation is important to produce the optimal solution for distributing maintenance budget reasonably. However, conventional methods of bridge assessment are not suitable for a more sophisticated decision making procedure. In this study, a method to compute quantitative performance profiles has been proposed to overcome the limitations of those conventional models. In Bridge Management Systems, the main role of performance profiles is to compute and predict the performance of bridges subject to lifetime activities with uncertainty. Therefore, the computation time for obtaining an optimal maintenance scenario is closely related to the efficiency of the performance profile. In this study, the Response Surface Method (RSM) based on independent and important design variables is developed for the rapid computation. Steel box bridges have been investigated because the number of independent design variables can be reduced significantly due to the high dependency between design variables.

• Progress in Medical Physics
• /
• v.3 no.2
• /
• pp.1-12
• /
• 1992

For intraoperative radiation therapy using electron beams, a cone system to deliver a large dose to the tumor during surgical operation and to save the surrounding normal tissue should be developed and dosimetry for the cone system is necessary to find proper X-ray collimator setting as well as to get useful data for clinical use. We developed a docking type of a cone system consisting of two parts made of aluminum: holder and cone. The cones which range from 4cm to 9cm with 1cm step at 100cm SSD of photon beam are 28cm long circular tubular cylinders. The system has two 26cm long holders: one for the cones larger than or equal to 7cm diamter and another for the smaller ones than 7cm. On the side of the holder is an aperture for insertion of a lamp and mirror to observe treatment field. Depth dose curve. dose profile and output factor at dept of dose maximum. and dose distribution in water for each cone size were measured with a p-type silicone detector controlled by a linear scanner for several extra opening of X-ray collimators. For a combination of electron energy and cone size, the opening of the X-ray collimator was caused to the surface dose, depths of dose maximum and 80%, dose profile and output factor. The variation of the output factor was the most remarkable. The output factors of 9MeV electron, as an example, range from 0.637 to 1.549. The opening of X-ray collimators would cause the quantity of scattered electrons coming to the IORT cone system. which in turn would change the dose distribution as well as the output factor. Dosimetry for an IORT cone system is inevitable to minimize uncertainty in the clinical use.

• Journal of Distribution Research
• /
• v.17 no.3
• /
• pp.1-24
• /
• 2012

Franchises have recently emerged as the most rapidly expanding industry positioned to create a large impact in the domestic economic. The Chinese franchise industry developed rapidly in the period prior and subsequent to WTO accession with more than 50% of new franchises brands emerging since 2000. M&A transactions in the Chinese franchise industry have progressed actively. In the period from 2005-2007, due to the wholesale and retail market opening in accordance with the guidelines laid forth within the MOU by the WTO the Chinese franchise market is now the largest market in the world all despite a short history of only 20 years. The amount of franchise market research on China is disproportional to its current size and development potential. Beginning in the 1990s, market research conducted by the International Franchise Association focused on emerging markets in Eastern Europe and China. While the research dealt with the Chinese investment environment, it insufficiently explained the market region and cultural environment. The purpose of this research is (i) to investigate the determinants of the performance of franchise systems in China and (ii) new contract renewals based on performance factors. This study will complement existing research in terms of the franchisee perspective. This study may also prove of the benefit to the franchise companies entering the Chinese franchise market enabling them to develop an effective strategy. This study shows that support, incentives, and system standardization by franchisor yielded a positive effect on management performance. This is consistent with previous studies by Shin (2000) and Kim (2008) targeting Korean franchises. Therefore, in the Chinese market, the franchisor must focus on support, incentives, and system standardization rather than concentrate only on the recruitment of franchisees in order to improve revenue. Hypotheses regarding franchisor control have been dismissed in existing research, in the opinion of this study, due to their complexity and inability to control the merchant as a one-kind-assessment-standard. Our findings show that the franchisees' financial condition, management ability and entrepreneurial spirit, among franchisee's characteristics, have a positive effect on franchisor's business performance and satisfaction for the franchisee. This is consistent with previous studies on headquarters' management performance of Lussier (1996), Heo and Jang (2008), and franchisees' financial condition, management ability and entrepreneurial spirit effect on franchisor's satisfaction of Weaven and Franzer (2007), Kim (2009), Han (2009), and Yoon etc. (2008). Therefore, when permitting a franchisee, financial condition, management ability, entrepreneurship of the franchisee should be carefully considered. Among relational factors between franchisor and franchisee, trust has the positive influence on the management performance of the franchisor while conflict has a negative effect. However, trust, commitment and conflict factors have been shown not to have any impact on the satisfaction of the franchise headquarters. This result is consistent with the previous studies of Pavlou and Ba (2000), Morrison (1999), Weaven and Frazer (2007), Kim and Park (1994), Sohn (2007) which show that trust between franchisor and the franchisees have a positive effect and that conflict has a negative impact on franchisor's management performance. Other factors causing a negative effective on the franchisor's management performance are a rapid environmental changes and uncertainty in the business. This is consistent with Campbell et al (2007), Kim and Kim (2009), Han and Baek (2008). Finally, the high management performance and satisfaction of the franchise headquarters has a positive effect on the intention of franchise renewal. In the case of large markets such as China, the franchisor's strategy and the role is very important. In this study, we also investigated the characteristics of franchisor and franchisee, relationship, and environmental uncertainty affecting on the management performance and satisfaction of franchisor. Recently, Korean franchises are attempting to enter foreign markets through the rise in popularity of Korean culture and entertainment commonly referred to as the Korean wave. This study provides recommendations for Korean franchises intending on entering the Chinese market. First, in order to achieve stable profits, the franchise corporation needs to support the operation of the individual franchisee through incentives and standardization of services. Second, because trust between the franchisor and franchisee has a positive effect on management performance, on-going discussion and cooperation is necessary to reduce the level of conflict.

• Journal of the Korean earth science society
• /
• v.28 no.3
• /
• pp.298-310
• /
• 2007

Intercomparison between eight radiative transfer codes used for the studies of COMS (Communications, Ocean, and Meteorological Satellite) in Korea was performed under pure molecular, i.e., Rayleigh atmospheres in four shortwave fluxes: 1) direct solar irradiance at the surface, 2) diffuse irradiance at the surface, 3) diffuse upward flux at the surface, and 4) diffuse upward flux at the top of the atmosphere. The result (hereafter called the H15) from Halthore et al.'s study (2005) which intercompared and averaged 15 codes was used as a benchmark to examine the COMS models. Uncertainty of the seven COMS models except STREAMER was ${\pm}4%$ with respect to the H15, comparable with ${\pm}3%$ of Halthore et al.'s (2005). The uncertainty increased under a large $SZA=75^{\circ}$. The SBDART model generally agreed with the H15 better than the 6S model, but both models in the shortwave infrared region were equally good. The direct solar irradiance fluxes at the surface, computed by the SBDARTs of four different users, were different showing a relative error of 1.4% $(12.1Wm^{-2})$. This reason was partially due to differently installing the wavelength resolution in the flux integration. This study may be useful for selecting the optimum model in the shortwave region.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.25-31
• /
• 2019

Purpose: Metals induce metal artifact during CT-image for therapy planning, and it occurs images distortion, which affects the volumetric measurement and radiation calculation. In the case of using megavoltage computed tomography(MVCT), the volume of metals can be measured as similar to true volume due to minimal metal artifact outcome. In this study, radiation assessment was conducted by comparing teeth volume from images of kVCT and MVCT of head and neck cancer patients, then assigning to kVCT image to calculate radiation after obtaining the similar volume of true teeth volume from MVCT. Also, formal IR image was able to verify the accuracy of radiation calculation. Material and method: 5 head and neck cancer patients who had intensity-modulated radiation therapy from Radixact^® Series were of the subject in this study. Calculations of radiation when constraining true teeth volume out of kVCT image(A-CT) and when designated specific HU after teeth assigned using MVCT image were compared with formal IR image. Treatment planning was devised at the same constraints and mean dose was measured at the radiation assess points. The points were anterior of the teeth, between PTV and the teeth, the interior of PTV near the teeth, and the teeth where 5cm distance from PTV. Result: A difference of metals volume from kVCT and MVCT image was mean 3.49±2.61cc, maximum 7.43cc. PTV was limited to where the internal teeth were fully contained. The results of PTV dose evaluation showed that the average CI value of the kVCT treatment planning without the artifact correction was 0.86, and the average CI value of the kVCT with the artifact correction using MVCT image was 0.9. Conclusion: When the Treatment Planning was made without correction of metal artifacts, the dose of PTV was underestimated, indicating that dose uncertainty occurred. When the computerized treatment plan was made without correction of metal artifacts, the dose of PTV was underestimated, indicating that dose uncertainty occurred.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.360-373
• /
• 2017

The BTO-a projects is the types, which has a demand risk among the type of PPP projects in Korea. When demand risk is realized, private investor encounters financial difficulties due to lower revenue than its expectation and the government may also have a problem in stable infrastructure operation. In this regards, the government has applied various risk sharing policies in response to demand risk. However, the amount of government's risk sharing is the government's contingent liabilities as a result of demand uncertainty, and it fails to be quantified by the conventional NPV method of expressing in the text of the concession agreement. The purpose of this study is to estimate the value of investment risk sharing by the government considering the demand risk in the profit sharing system (BTO-a) introduced in 2015 as one of the demand risk sharing policy. The investment risk sharing will take the form of options in finance. Private investors have the right to claim subsidies from the government when their revenue declines, while the government has the obligation to pay subsidies under certain conditions. In this study, we have established a methodology for estimating the value of investment risk sharing by using the Black - Scholes option pricing model and examined the appropriateness of the results through case studies. As a result of the analysis, the value of investment risk sharing is estimated to be 12 billion won, which is about 4% of the investment cost of the private investment. In other words, it can be seen that the government will invest 12 billion won in financial support by sharing the investment risk. The option value when assuming the traffic volume risk as a random variable from the case studies is derived as an average of 12.2 billion won and a standard deviation of 3.67 billion won. As a result of the cumulative distribution, the option value of the 90% probability interval will be determined within the range of 6.9 to 18.8 billion won. The method proposed in this study is expected to help government and private investors understand the better risk analysis and economic value of better for investment risk sharing under the uncertainty of future demand.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.31-57
• /
• 1991

Korean firms of all sizes, from virtually every industry, have used and are using the term "excessive competition" to describe the state of their industry and to call for government interventions. Moreover, the Korean government has frequently responded to such calls in various ways favorable to the firms, such as controlling entry, curbing capacity investments, or allowing collusion. Despite such interventions' impact on the overall efficiency on the Korean economy as well as on the wealth distribution among diverse groups of economic agents, the term "excessive competition", the basis for the interventions, has so far escaped rigorous scrutiny. The objective of this paper is to clarify the notion of "excessive competition" and "over-investment" which usually accompanies "excessive competition", and to examine the circumstances under which they might occur. We first survey the cases where the terms are most widely used and proceed to examine those cases to determine if competition is indeed excessive, and if so, what causes "excessive competition". Our main concern deals with the case in which the firms must make investment decisions that involve large sunk costs while facing uncertain demand. In order to analyze this case, we developed a two period model of capacity precommitment and the ensuing competition. In the first period, oligopolistic firms make capacity investments that are irreversible. Demand is uncertain in period 1 and only the distribution is known. Thus, firms must make investment decisions under uncertainty. In the second period, demand is realized, and the firms compete with quantity under realized demand and capacity constraints. In the above setting, we find that there is "no over-investment," en ante, and there is "no excessive competition," ex post. As measured by the information available in period 1, expected return from investment of a firm is non-negative, overall industry capacity does not exceed the socially optimal level, and competition in the second period yields an outcome that gives each operating firm a non-negative second period profit. Thus, neither "excessive competition" nor "over-investment" is possible. This result will generally hold true if there is no externality and if the industry is not a natural monopoly. We also extend this result by examining a model in which the government is an active participant in the game with a well defined preference. Analysis of this model shows that over-investment arises if the government cannot credibly precommit itself to non-intervention when ex post idle capacity occurs, due to socio-political reasons. Firms invest in capacities that exceed socially optimal levels in this case because they correctly expect that the government will find it optimal for itself to intervene once over-investment and ensuing financial problems for the firms occur. Such planned over-investment and ensuing government intervention are the generic problems under the current system. These problems are expected to be repeated in many industries in years to come, causing a significant loss of welfare in the long run. As a remedy to this problem, we recommend a non-intervention policy by the government which creates and utilizes uncertainty. Based upon an argument which is essentially the same as that of Kreps and Wilson in the context of a chain-store game, we show that maintaining a consistent non-intervention policy will deter a planned over-investment by firms in the long run. We believe that the results obtained in this paper has a direct bearing on the public policies relating to many industries including the petrochemical industry that is currently in the center of heated debates.