• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1613-1621
• /
• 2002

An electromagnetic flowmeter(EMF) essentially averages the velocity distribution over the pipe cross- sectional area, and the measured value is dependent on the velocity profiles. In this study, installation effects of 90$^{\circ}$long elbow(KS B 1522, ISO 3419) on the EMF characteristics was investigated. A commercial EMF was adopted and the distribution of magnetic field in the electrodes cross section was measured. In the experiment, the national flow standard system, of which measurement uncertainty was evaluated in accordance with ISO 17025 recommendation, was used fur characterization of EMF. The leading line has 150D long straight pipe to established a fully developed flow before entering into the elbow and the elbow was installed downstream of it. then the flowmeter was tested within 50 D from the elbow. The installation effects of the flowmeter were investigated by varying the mean velocity(Reynolds No.)in pipe section, the locations and the direction of electrodes plane.($\phi$) From the experimental results, we find the optimal conditions to get most accurate measurements. Generally, the deviations from the calibration value were less than 0.5 % in farther than 10D distance from the elbow and the direction of electrode plane. $\phi$ = 90$^{\circ}$yielded the smallest measurement deviation. These characteristics were shown consistently in turbulent region regardless of the mean Reynolds number.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.54-60
• /
• 2010

An experimental study has been carried out to determine the flow rate for a feasible N2 generator to extinguish the fire, and this study analogized the correlations to determine the flow rate for $N_2$ generator considered an Oxygen concentration, protected enclosure, discharging pressure and discharging time. We manufactured simple protected enclosure for analyzing fire-extinguishing performance of the $N_2$ generator. As a $N_2$ gas is exhausted on protected enclosure, a various of Oxygen concentration is measured to analyze fire-extinguishing performance experimentally. The correlations determined as an uncertainty analysis for the Oxygen concentration deviations of the theoretical and experimental value. The analogized correlations is Q = (21 $\times$ V)/($O_2+{\zeta}{\cdot}P$)-V. In case of $300m^3$ protected enclosure, 0.8 MPa discharging pressure and $40m^3$/min $N_2$ flow rate, the Oxygen concentration is decreased below 15% within 3 minutes.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.28-33
• /
• 2010

The present study develops a numerical model based on the computational fluid dynamics technique to analyse the thermal flow characteristics of large scale fire calorimeter and examine the characteristics of primary parameters affecting on the uncertainty of heat release rate measurement. ANSYS CFX version 12.1 which is a commercial CFD package is used to solve the governing equations of the thermal flow field and the eddy dissipation combustion model and P-1 radiation model are applied to simulate the fire driven flow. The numerical results shows that the horizontal duct system with $90^{\circ}$ bend duct was shown relatively high deviated asymmetric flow profiles at the sampling location and the deviation of the velocity field was higher than that of the temperature and species quantities. The present study shows that the computational model can be applicable to optimize the design process and operating condition of the large scale fire calorimeter based on the understanding of the detail flow field.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2010

It is difficult to predict the accurate fatigue life of the ship structure because of load uncertainty and load redistribution at the ship structure members. As one of studies for accurate evaluation and prediction of fatigue life, it is a promising way to detect the crack previously by attaching the Fatigue Indicator Sensor (FIS) at the crack prediction region. In order to predict the fatigue life of the ship structure by using FIS, it is required to know previously the crack propagation characteristics according to pre-notch shapes. In this study, we obtained the stress distribution phase, stress concentration factors and stress intensity factor of various pre-notch shapes through FEA. Additionally, we conducted the fatigue test and obtained the characteristics of crack propagation according to the pre-notch shapes through comparison between the fatigue test and the FEA. Consequently, we classified the pre-notch shape into 3 categories: Long, Medium, and Short life type. On the basis of the numerical and experimental results, the FIS can be developed.

• Archives of design research
• /
• v.15 no.2
• /
• pp.59-70
• /
• 2002

The psychological system of human beings has gone through changes from material satisfaction to spiritual satisfaction. That is, $\ulcorner$From real goods to feel goods$\lrcorner$: much attention is not paid to physical consumption of real products but to consumption of time containing information value such as services capable of enriching and entertaining life. Entertainment is a cultural industry based on mass consumption culture. In this context, this research is designed to look into the entertainment tendency of the industrial areas and to take a look at various forms of attraction serving as the factor of absorption to users. The study indicates that the moderns impose much value on invisible goods such as experience. And the most popularized method is to appeal to clients for sensory interaction by presenting the experience of joy. Entertainment in a true sense is generated on the basis of creativity, which is a product of intuition and efforts directed toward the understanding of emotional ties with the general public characterized by uncertainty.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.53.1-53.1
• /
• 2018

During a major solar eruption, the erupting plasma is possibly out of the equilibrium ionization state because of its rapid heating or cooling. The non-equilibrium ionization process is important in a rapidly evolving system where the thermodynamical time scale is shorter than the ionization or recombination time scales. We investigate the effects of non-equilibrium ionization on EUV and X-ray observations by the Atmospheric Imaging Assembly (AIA) on board Solar Dynamic Observatory and X-ray Telescope (XRT) on board Hinode. For the investigation, first, we find the emissivities for all the lines of ions of elements using CHIANTI 8.07, and then we find the temperature responses multiplying the emissivities by the effective area for each AIA and XRT passband. Second, we obtain the ion fractions using a time-dependent ionization model (Shen et al. 2015), which uses an eigenvalue method, for all the lines of ion, as a function of temperature, and a characteristic time scale, $n_et$, where $n_e$ and t are density and time, respectively. Lastly, the ion fractions are multiplied to the temperature response for each passband, which results in a 2D grid for each combination of temperature and the characteristic time scale. This is the set of passband responses for plasma that is rapidly ionized in a current sheet or a shock. We investigate an observed event which has a relatively large uncertainty in an analysis using a differential emission measure method assuming equilibrium ionization state. We verify whether the observed coronal plasmas are in non-equilibrium or equilibrium ionization state using the passband responses.

• Smart Structures and Systems
• /
• v.26 no.2
• /
• pp.227-239
• /
• 2020

Despite proven effectiveness and accuracy in laboratories, the existing damage assessment based on guided ultrasonic waves (GUWs) or acoustic emission (AE) confronts challenges when extended to real-world structural health monitoring (SHM) for railway tracks. Central to the concerns are the extremely complex signal appearance due to highly dispersive and multimodal wave features, restriction on transducer installations, and severe contaminations of ambient noise. It remains a critical yet unsolved problem along with recent attempts to implement SHM in bourgeoning high-speed railway (HSR). By leveraging authors' continued endeavours, an SHM framework, based on actively generated diffuse ultrasonic waves (DUWs) and a benchmark-free condition contrast algorithm, has been developed and deployed via an all-in-one SHM system. Miniaturized lead zirconate titanate (PZT) wafers are utilized to generate and acquire DUWs in long-range railway tracks. Fatigue cracks in the tracks show unique contact behaviours under different conditions of external loads and further disturb DUW propagation. By contrast DUW propagation traits, fatigue cracks in railway tracks can be characterised quantitatively and the holistic health status of the tracks can be evaluated in a real-time manner. Compared with GUW- or AE-based methods, the DUW-driven inspection philosophy exhibits immunity to ambient noise and measurement uncertainty, less dependence on baseline signals, use of significantly reduced number of transducers, and high robustness in atrocious engineering conditions. Conformance tests are performed on HSR tracks, in which the evolution of fatigue damage is monitored continuously and quantitatively, demonstrating effectiveness, adaptability, reliability and robustness of DUW-driven SHM towards HSR applications.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.81-90
• /
• 2012

The contents of this study are as follows. First, an academic understanding has been achieved by exploring the theoretical concept "allegory", and a new theoretical approached methodology has been sought. Second, an analysis-index of fashion illustration cases has been suggested based on the allegory theory of Craig Owens. Third, in order to draw the characteristics of fashion illustration as viewed from the allegorical viewpoint and find out its feasibility, the case studies has been referred and the internal significance, external significance that combines different characteristics has been extracted. In regards to this study method, literature studies and case studies has been done in parallel with each other. This study was done in the following sequence: the establishment of the study system, the drawing of the allegory-associated concepts and the discovering the characteristics of aesthetic expressions. The results of this study on the expression characteristics of fashion illustration as viewed from the allegorical viewpoint of Craig Owens are as follows. First, the borrowing of image, which is a characteristic of allegory, contains the meaning of uncertainty in the fashion illustration as it expresses the image-synthesis and forms a completely different meaning as the fixed meaning is dissolved and it is utilized as a photo-montage technique. Second, the inference of pictogram is the mixture of linguistic medium and visual medium. Fashion illustration utilizes the characters and transmits the fashion information visually and immanently. It has the characteristic of making the information into pictograms and the internal significances of mutual-text with communication function. Third, the uniqueness of location in the fashion illustration has the special nature of utilized mediums as it is used for advertising or publicizing. The fashion illustration from the viewpoint of allegory has the impermanency of existing only for a limited time and reflects the coincidence that gives the meaning of utilized location according to the season trend. Fourth, the cross-breeding is expressed as the mixture of various materials in the fashion illustration. The expressions made by the mixture of media, such as the use of computer graphic programs mixed together with various materials showed the trend of diversity and genre dissolution.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.763-768
• /
• 2010

Today the light of mankind since the dawn of mankind and that they were living "lives" on the huge influence across space is a dynamic energy. Because of this, when all human beings with the light and you can feel more comfortable with a stable mind to the beauty and the pursuit of happiness is to have instincts. In this paper, a fuzzy control system using a combination of external environmental factors, respectively, the conversion of quantitative uncertainty information into the LED lighting is designed to express algorithms, available in indoor circadian control circuit was designed and fabricated LED. Factor in the external environment temperature, humidity, and light intensity values to the controller through the sensor to accept these values and the optimal values for lighting the fuzzy control algorithm is converted into human emotion to feel comfortable to express through the dimming control LED lighting.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.2 s.24
• /
• pp.102-110
• /
• 2005

After the IMF bailout, the Environment of Domestic Construction Industry had changed dramatically. Before the IMF, Domestic Construction Firms are secured by the government regulations and some traditional practices. However, due to the following reasons: a decrease in public works, an increase in uncertainty of market prediction, the change of bid system, and increase in construction firms, recently the competition among construction firms has became keen. Under the serious competition, in order that medium-size construction firms survive in the construction market, it is need to establish the strategy that could increase productivity. In order to establish the strategy, firstly, construction firms should set up an appraisal standard of construction firms. Consequently, This study will introduce companies' objective appraisal in domestic construction market as well as basal data for setting-up strategy through adaptation industry structure analysis of business administration for strategic group analysis and a company which has lagged behind competitive power among the competitive companies can choose a target strategic group which should be pursued it in the future through being classified according to a group taken analogical strategy.