• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.161-168
• /
• 2007

In this paper, the floating body with double barriers is introduced with a study on the flow patterns and characteristics in around the floating body by using 2 frame p article tracking method. This paper introduce an analisys method to predict the characteristics of flow around the neighbording fields of Floating Body with double barriers in order to investigate a high performance model. Flow visualization has conducted in a circulating water channel by a high speed camera and etc. Flow phenomena according to velocity distribution and flow separation around the floating body with double barriers were obtained by two-dimensional PIV system.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.4
• /
• pp.176-184
• /
• 2016

Electrochemical ion exchange method is expected to be one of the most acceptable techniques for the separation of radioactive cations from nuclear wastewater. In this study a thin film of hexacyanoferrate on nickel surface was derivatized chemically in an aqueous potassium-ferricyanide solution. Electrochemical redox behavior of the nickel hexacyanoferrate(NiHCNFe) film electrode was investigated with the use of cyclic voltammetry potentiostated from -100 to 800 mV versus SCE. The electro-reduction characteristics of the NiHCNFe film were examined in the cobalt solutions. The NiHCNFe ion exchanger was more useful at lower concentration, lower temperature, and pH7 of the cobalt solution. The capacity loss of NiHCNFe was 0.018%/cycle that was less than the average loss of 2~3%/cycle of the convective organic exchanger. The 45~55% of the initial cobalt ions was electro-deposited on the NiHCNFe by using continuous recirculating reactor system. As a result, it was found that the electroactive NiHCNFe films showed better performance than the organic resins for the separation of cobalt ion from the aqueous solutions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.613-631
• /
• 2013

Cognitive radio (CR) is proposed as a key solution to improve spectral efficiency and overcome the spectrum scarcity. Spectrum sensing is an important task in each CR system with the aim of identifying the spectrum holes and using them for secondary user's (SU) communications. Several conventional methods for spectrum sensing have been proposed such as energy detection, matched filter detection, etc. However, the main limitation of these classical methods is that the CR network is not able to communicate with its own base station during the spectrum sensing period and thus a fraction of the available primary frame cannot be exploited for data transmission. The other limitation in conventional methods is that the SU data frames should be synchronized with the primary network data frames. To overcome the above limitations, here, we propose a spectrum sensing technique based on blind source separation (BSS) that does not need time synchronization between the primary network and the CR. Moreover, by using the proposed technique, the SU can maintain its transmission with the base station even during spectrum sensing and thus higher rates are achieved by the CR network. Simulation results indicate that the proposed method outperforms the accuracy of conventional BSS-based spectrum sensing techniques.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.41-52
• /
• 1994

The importance of separation comes from demands on study for exact effect of synthetic drugs and the reactivity of enantiomer in biological system. Racemization rate was measured under the influence of heat, acid, UV-light, enzyme(trypsin) and 6N-HCl at $105^{\circ}C$ on alanine, threonine, isoleucine, lecuine, aspartic acid, methionine, glutamic acid, tyrosine. The method for the identification of overlapped amino acids with GC was developed from the close study of fragmentation pattern with mass spectrometry. With cyclodextrin bonded phase by HPLC, the separation of dansyl amino acid was tested for compartison.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.260-263
• /
• 2000

Membranes are widely used to separate target solute molecules such as proteins on the basis of their size in cell broth mixture to minimize the loss of target compounds. In this study, membrane separation system using ultrafilters of MWCO 100 K and 50 K, was operated for concentration and purification of microbial transglutaminase. Fermentation broth containing MTGase was prefiltered by using pore size 1.6 and $0.7\;{\mu}m$ pre-filter made of cellulose fiber and $0.45\;{\mu}m$ microfilter made of cellulose acetate. The prefiltered solution was concentrated by 100 K and 50 K ultrafilter. The final enzyme concentration was 1.29 units/ml and enzyme specific activity was 0.2 units/mg protein. This specific activity were 3.7 times higher than that of initial cell broth mixture. Membrane separation process of microfiltration and ultrafiltration was proved to be very economic, energy efficient and effective separation method used to concentrate MTGase.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.933-945
• /
• 1994

A shock-wave in a supersonic flow can be theoretically determined by a given pressure ratio at upstream and downstream flowfields, and then the obtained shock-wave is stable in its position. Under the practical situation in which the shock-wave interacts with the boundary layer along a solid wall, it cannot, however, be stable even for the given pressure ratio being independent of time and oscillates around a time-mean position. In the present study, oscillations of a weak normal shock-wave in a supersonic diffuser were measured by a Line Image Sensor(LIS), and they were compared with the data of the wall pressure fluctuations at the foot of the shock-wave interacting with the wall boundary layer. LIS was incorporated into a conventional schlieren optical system and its signal, instantaneous displacement of the interacting shock-wave, was analyzed by a statistical method. The results show that the displacement of an oscillating shock-wave increase with the upstream Mach number and the dominant frequency components of the oscillating shock-wave are below 200 Hz. Measurements indicated that shock-wave oscillations may not entirely be caused by the boundary layer separation. The statistical properties of oscillations appeared, however, to be significantly affected by shock-induced separation of turbulent boundary layer.

• Journal of Hydrogen and New Energy
• /
• v.19 no.2
• /
• pp.111-117
• /
• 2008

A Bunsen reaction section is a primary stage of Sulfur-iodine thermochemical hydrogen production cycle. This section is important, because it decides the efficiency of next stages. In order to produce hydrogen very efficiently, the characteristics of Bunsen reaction were investigated via two experimental methods. The one is a phase separation of $H_2SO_4-HI-H_2O-I_2$ mixture system, and the other is a direct Bunsen reaction. The characteristics of each method were investigated and compared. As the result of this study, the amount of HI and $I_2$ in $H_2SO_4$ phase via Bunsen reaction was more decreased than that via $H_2SO_4-HI-H_2O-I_2$ mixture system with increasing $I_2$ concentration. However, the amount of $H_2SO_4$ in $HI_x$ phase via Bunsen reaction was remarkably increased with increasing $I_2$ concentration, while that via $H_2SO_4-HI-H_2O-I_2$ mixture system was decreased. On the other hand, the range of initial composition which is able to separate into two liquid phases without $I_2$ solidification was almost alike.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1513-1520
• /
• 2000

Complex modal testing method for rotating disks with support motion is introduced which handles the pairs of two point excitation and responses of the disk as complex input and output, respectively. This method utilizes the directivity information and the separation over the rotational speed of forward and backward traveling wave modes or bending coupled modes in the directional frequency response functions(dFRFs). This method synthesizes the normal/reverse dFRFs and complex wave dFRF, which were originally applied to rotating shaft and rotating disk, respectively, and is applied to complex system with dynamically coupled rotating disks and shaft. Experiments with a commercial hard disk drive spindle system demonstrate the validity of this method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.548-552
• /
• 2005

In most physical processes, the transfer function includes a time-delay, and in the general distributed control system using a computer network, an inherent time-delay exists due to the spatial separation between controllers and actuators. Under the circumstance where an input time-delay exits, the system response overshoots and tends to diverge. For this reasons described above, a controller design method is proposed for a discrete nonlinear system including input time-delay, which adopts the time-discretization using Taylor series. Controllers are synthesized using an input/output linearization method. Finally, several cases of the computer simulations were conducted, and the results validate the proposed methods.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.363-375
• /
• 2002

The effect of the electromagnetic force (or Lorentz force) on the flow behavior around a circular cylinder is investigated by computation. Two-dimensional unsteady flow computation for Re=10$^2$is carried out using a numerical method of finite difference approximation in a curvilinear body-fitted coordinate system by solving the momentum equations including the Lorentz force as a body force. The effect of spatial variations of the Lorentz forcing region and forcing direction along the cylinder circumference is investigated. The numerical results show that the Lorentz force can effectively suppress the flow separation and oscillation of the lift force of circular cylinder cross-flow, leading to reduction of drag.