• Korean Journal of Construction Engineering and Management
• /
• v.23 no.4
• /
• pp.36-46
• /
• 2022

It takes a relatively long time for construction companies that lack the ability to finance to adapt to construction policy in the construction industry. However, financial institutions rarely provide financial products to construction companies, particularly small and medium-sized construction companies, because their security capacity and credit rating are low. This study investigates the financial products needed for small and medium construction companies to adapt to policy changes. The demand of small and medium construction companies for financial products is analyzed by experts' advise and survey. And, when the investigated financial products for the construction industry are introduced, the legal systems in need of revision are analyzed. Based on the analyzed demand and the number of legal systems needing revision, the priority for the introduction of financial products to the construction industry is analyzed. Among the financial products investigated, the priority of "Expert consultation, such as accountant, tax accountant, lawyer, etc." is the highest. In future studies, the criteria and method of financial product development for high-priority financial products could be researched.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.63-70
• /
• 2010

In IEEE 802.11e system providing differentiated services, there exist some problems as follows; collision probability increase due to the increase in the number of nodes by employing CSMA/CA transmission mode, transmission speed declining tendency towards the worst of it, which is caused by different transmission mode and decrease of TCP transmission rate as the result of the link occupancy by UDP when TCP shares the link with UDP by the TCP’s flow control characteristic. In this thesis, the initial minimum and maximum CW are set differently according to the number of connected nodes in the network to avoid collisions and TXOP is adjusted according to the channel state, in which ACs with low priority but better channel state will get gradually more chances to transmit leading to optimal channel capacity. Also, by allowing higher priority for ACK frames which control the TCP transmission, the flow control becomes better because that reduces the channel occupancy by UDP flow, and by this, fair transmission is obtained from the result of the more fair transmission and active resource allocation.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.89-96
• /
• 2019

In this study, alarm sound generated as a priority alert system propagation through an elevator shaft in apartment buildings were simulated using room acoustic simulation software. The simulations were conducted on three kinds of elevator hall plan with a different number of elevators and placement. First, the elevator shaft without sound absorption material was simulated as a condition of the present. When the distance from the alarm sound generating floor became farther, alarm sound level was decreased. However, the alarm sound level three-floor distance was about 54 dB(A)~56 dB(A) which were louder than a background sound level of typical apartment buildings. Sound absorption material placement proposed by previous studies were simulated and the alarm sound levels were decreased about 12 dB~16 dB. These levels were similar or lower than the background level of apartment buildings. From these results, it can be concluded that placing sound absorption material on the surface of the elevator shaft wall can be one of the methods to control the alarm sound as regulated in NFSC.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.3
• /
• pp.89-99
• /
• 1995

One of the hardest problems that limit real application of production system is its slowness. One way to overcome this problem is to speed up the matching operation which occupies more than 90% of the total execution time. In this paper, we try to speed up the matching operation with parallel execution of a typical pattern matching algorithm, RETE, in a multiprocessor environment, This requires not only to make partitions of the rules but also to allocate the partitioned rules to processors, respectively. A partition strategy is proposed to make groups of similar rules by evaluating the similarity of rules according to the number of common conditions between rules. An allocation strategy is proposed to make the load of each processor even by assigning the different priority to the group of rules according to the expected amount of time required for matching operation. To compare with the existing methods, we perform simulation using OPS5 sample programs. The simulation results show that the proposed methods can improve the performance of production system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.919-929
• /
• 2009

2008, Seoulmetro transports an average of 3,952,000 passengers every day with a 0.8% increase of the daily ridership compared to last year.(Korean Economics '09.01.21) Seoul subway systems ridden by a considerable number of Seoul citizens place their top priority on swiftness, safety and clean underground air quality so as to meet the customer satisfaction. One of the most important problems is to eliminate minute dust(PM10) among the pollutants such as the gas attributable to air pollution and floating particulate matter defined by the ordinance of the Ministry of Environment. Seoulmetro install and operate many kinds of air filtration facilities, however we've launched a research on "Standardization Plan on Underground Air Filtration Facility" for the installation and improvement of optimum standardized air filtration system. As a preliminary study, we're going to consider ventilation system and air filter to supply filtered metropolitan outdoor air aimed at ensuring clean underground environment.

• YAKHAK HOEJI
• /
• v.51 no.2
• /
• pp.126-132
• /
• 2007

Demand for manpower of conducting pharmaco-economic evaluation was investigated. The priority order of conducting economic evaluation on the already listed drugs was set by the budget impact for health insurance by the therapeutic groups. Manpower demand was estimated by the Anatomical, Therapeutical, Chemical (ATC) code. The total number of economic evaluation on the already listed drugs is estimated to be 346 cases. Based on these numbers, at least 53${\sim}$102 of full-time-equivalent (FTE) manpower is needed for conducting economic evaluation per year in the following 5 years.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.51-56
• /
• 2022

The main purpose of the study is to analyze the features of ensuring the financial and economic security of the state in an aggressive external environment. The concept of financial and economic security should contain the priority goals and objectives of ensuring security, ways and methods to achieve them, adequately reflecting the role of finance in the socioeconomic development of the state. Its content is designed to coordinate nationwide actions in the field of security at the level of individual citizens, business entities, industries, sectors of the economy, as well as at the regional, national and international levels. The methodology includes a number of scientific and theoretical methods of analysis. Based on the results of the study, the key aspects of the system for ensuring the financial and economic security of the state in an aggressive external environment were identified.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.174-179
• /
• 2015

Failure Mode and Effects Analysis (FMEA) has been used by Dynamic Positioning (DP) system for risk and reliability analysis. However, there are limitations associated with its implementation in offshore project. 1) since the failure data measured from the SCADA system is missing or unreliable, assessments of Severity, Occurrence, Detection are based on expert's knowledge; 2) it is not easy for experts to precisely evaluate the three risk factors. The risk factors are often expressed in a linguistic way. 3) the relative importance among three risk factors are rarely even considered. To solve these problems and improve the effectiveness of the traditional FMEA, we suggest a Fuzzy-FMEA method for risk and failure mode analysis in Dynamic Positioning System of offshore. The information gathered from DP FMEA report and DP FMEA Proving Trials is expressed using fuzzy linguistic terms. The proposed method is applied to an offshore Dynamic Positioning system, and the results are compared with traditional FMEA.

• International Journal of Contents
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2019

In an environment where a large number of weapons are operated compared to a large number of ground targets, it is important to monitor and manage the targets to set up a fire plan, and through their multilateral analysis, to equip them with a priority order process for targets having a high threat level through the quantitative calculation of the threat level. Existing studies consider the anti-aircraft and anti-ship targets only, hence, it is impossible to apply the existing algorithm to ground weapon system development. Therefore, we proposed an effective threat evaluation algorithm for multiple ground targets in multi-target and multi-weapon environments. Our algorithm optimizes to multiple ground targets by use of unique ground target features such as proximity degree, sorts of weapons and protected assets, target types, relative importance of the weapons and protected assets, etc. Therefore, it is possible to maximize an engagement effect by deducing an effective threat evaluation model by considering the characteristics of ground targets comprehensively. We carried out performance evaluation and verification through simulations and visualizations, and confirmed high utility and effect of our algorithm.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.15-22
• /
• 2011

U-Healthcare service is a real-time service using the vital signs which are continuously transferred from monitoring sensors attached to mobile patients under the wireless network environments. It should monitor the health condition of mobile patients everywhere at any time. In this paper, we have improved two features of the three layered mobile patient monitoring system with load balancing ability. First, the simulation process has been improved by allowing the number of related nodes to be changed. Secondly, we have modified S node to which queue is added to reduce the loss rate of collecting data from patients during the delay of S node process. And the data from the patient with high priority can be transferred to the server immediately through the filtering function. Furthermore, we have solved the problem of redundancy in sharing information among S nodes by differentiating process time to each S node. By performing a DEVS Java-based system simulation, we have verified the efficiency of this improved system.