• 한국전자파학회논문지
• /
• 제24권2호
• /
• pp.198-206
• /
• 2013

본 논문에서는 다기능 레이더의 추적 성능 개선을 위해 임무 우선 순위 선정을 위한 퍼지 추론 시스템 기반의 기법을 제안하였다. 제안한 기법은 추적 임무 수행 시 우선 순위 결정 트리를 구성하고, 퍼지 집합으로 추적 안정도, 위협도, 접근성을 선정하고, 퍼지 규칙을 통한 추적 임무의 우선 순위를 얻는 방식이다. 우선 순위를 높게 책정할 경우, 추적 주기를 변화시켜 추적의 정확도를 높일 수 있도록 설계하였다. 추적 성능 개선 효과를 입증하기 위해 기동 특성이 뚜렷한 표적 궤적을 생성하고, 제안된 기법을 적용한 경우와 적용하지 않은 경우를 시뮬레이션으로 비교 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1356-1362
• /
• 2015

The location of PV systems in distribution system has been increased as one of countermeasure for global environmental issues. As the operation efficiency of PV systems is getting decreased year by year due to the aging phenomenon and maintenance problems, the optimal algorithm for state diagnosis in PV systems is required in order to improve operation performance in PV systems. The existing output prediction algorithms considering various parameters and conditions of PV modules could have complicated calculation process and then their results may have a possibility of significant prediction error. To solve these problems, this paper proposes an optimal prediction algorithm of PV system by using least square methods of linear regression analysis. And also, this paper presents a performance evaluation algorithm in PV modules based on the proposed optimal prediction algorithm of PV system. The simulation results show that the proposed algorithm is a practical tool of the state diagnosis for performance improvement in PV systems.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.584-597
• /
• 2016

This paper focuses on an improvement in the transient performance of Boost converters when the load changes abruptly. This is achieved on the basis of the nature trajectory in Boost converters. Three key aspects of the transient performance are analyzed including the storage energy change law in the inductors and capacitors of converters during the transient process, the ideal minimum voltage deviation in the transient process, and the minimum voltage deviation control trajectory. The changing relationship curve between the voltage deviation and the recovery time is depicted through analysis and simulations when the load suddenly increases. In addition, the relationship curve between the current fluctuation and the recovery time is obtained when the load suddenly decreases. Considering the aspects of an increasing and decreasing load, this paper proposes the transient performance synthetic optimized trajectory and control laws. Through simulation and experimental results, the transient performances are compared with the other typical three control methods, and the ability of proposed synthetic trajectory and control law to achieve optimal transient performance is verified.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.29-35
• /
• 2011

This study aims to suggest improvement plans and explain about the current situation for facilitating Long-life housing, based on the results on flexibility items among 27 items consisting the "Housing Performance Grading System". From the 9th of January, 2006 to the month of July in 2011, study has analyzed evaluation results on 216 different types for each grade and reviewed evaluation criteria and methods. Current evaluation criteria applies quantitative analysis, by calculating in percentage how much bearing walls and columns, which hinder flexibility, take up space in the household. The evaluation rate for each household was assessed in relation to its structural system, and a higher grade was given to column-typed structures. In addition, to facilitate long-life housing, this study extracted harmful factors, expanding the range of evaluation. The first step was to evaluate structure, which is the basic element. The second step can to evaluate the probability of applying resources in response to the changes of structural systems. As The third step, Flexibility item will evaluate the probability of moving the water-using area, suggesting gradual approach. Thus, through evaluations of flexibility items, the study aims to improve the quality of life in household, by avoiding uniform structures and acquiring more freedom for space designs.

• 한국항만경제학회지
• /
• 제22권4호
• /
• pp.39-58
• /
• 2006

정보공유와 신뢰, 피드백을 바탕으로 한 파트너십 시스템은 각 협력사간 반품물류관리에 있어 보다 효율적인 성과를 얻을 수 있게 한다. 이 사례연구는 홈쇼핑업체와 각 협력사간 웹 기반의 파트너십 시스템을 통한 반품물류관리 개선 성과를 보여주고 있다. 첫째, 협력사간 거래비용과 작업시간을 감소시키고 있으며, 둘째, 생산라인의 집중화 및 계획 관리가 가능토록 하였다. 마지막으로 신속하고 정확한 반품관련 업무처리가 가능해지고 피드백을 통해 제품의 품질 향상을 도모할 수 있음을 보여주고 있다.

• 한국정보통신학회논문지
• /
• 제14권2호
• /
• pp.501-506
• /
• 2010

본 논문에서는 AMC(Adaptive Modulation and Coding) 기법에 MIMO(Multiple Input Multiple Output) 기법이 결합된 Adaptive-MCM(Modulation, Coding and MIMO) 시스템을 제안하고, 모의실험을 통해 그 성능을 분석한다. AMC 기법은 채널 환경에 따라서 변조방식, 코드율을 적응적으로 변화시켜 전송률과 신뢰도의 향상을 가져온다. 제안된 Adaptive-MCM 시스템은 채널 환경에 따라서 MIMO 기법을 적응적으로 활용함으로써 기존의 변조방식과 코드율의 조합에 국한된 AMC 기법보다 더욱 향상된 전송률과 에러 성능을 가져 오게 한다. 제안된 시스템의 성능 분석은 Adaptive-MCM 시스템을 적용한 시스템과 적용하지 않은 시스템의 각 전송률 결과를 바탕으로 비교 수행되었다. 실험결과, Adaptive-MCM 시스템을 적용함으로써 각 MCMS(Modulation, Coding, and MIMO Scheme) 레벨에 해당하는 조합을 고정적으로 사용하는 시스템에서 나타났던 SNR(Signal to Noise Ratio) 확보와 데이터율 증가 사이의 Trade-Off 관계 개선이 이루어졌으며, 이를 통해 평균 데이터율의 향상을 가져올 수 있었다.

• 기술혁신연구
• /
• 제13권3호
• /
• pp.175-196
• /
• 2005

This Paper examines analytic studies of the evaluation system used for evaluating government-supported R&D Institutes (GSRIs), and designs a new model for analyzing the evaluation system's effectiveness. The analytic models in existing studies use the meta evaluation and balanced scorecard (BSC) models. However, theses studies focused on the structure and elements of the evaluation system for examples, the appropriateness of the elements within the evaluation system and the balance of the evaluation index. Accordingly, the effectiveness of the GSRI evaluation system, that is, the evaluation's influence on GSRI performance improvement was not analyzed. This study uses the institution theory and contingency theory perspectives as related to government organization management to develop an analytical model of GSRI evaluation system effectiveness. The new model proposes an analytical approach for improving the effectiveness of the GSRI evaluation system in an institutionalized environment.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 춘계학술대회
• /
• pp.51-71
• /
• 2005

Performance measurement systems based on the principle that "if you can't measure it, you can't manage it" reinforce a short-term culture by focussing on tangible outputs. Instead, the focus of organisations should be on sustainable long-term performance through continuous systemic improvement. To establish and reinforce behaviours that drive systemic improvement, measurement and reporting systems need to be de designed to re-enforce work to role behaviour by managers. This paper discusses this concept and how it is being applied in practice through an ongoing action research project.

• 한국소음진동공학회논문집
• /
• 제22권9호
• /
• pp.837-844
• /
• 2012

We considered an approach in terms of materials for improvement of insulation performance of vehicle rubber hoses. Ethylene propylene rubber(EPDM) for heater hoses in cooling system and acrylic rubber(AR) for intercooler hose in intake system were chosen for mixing for the vibration and noise performance. We modified EPDM and AR through changing compound of base polymer, reinforcement fillers and additives. Dynamic mechanical analysis(DMA) was used to measure viscoelastic properties such as shear modulus and loss factor($tan{\delta}$). Vehicle acceleration test was also conducted to observe indoor changes in insulation performance of hoses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.929-930
• /
• 2006

This paper presents a direct instantaneous torque control (DITC) of Switched Reluctance Moto (SRM) with a novel 4-level converter to obtain smooth torque and dynamic performance improvement. The DITC method can reduce the high inherent torque ripple of SRM drive system, but driving efficiency and dynamic performance are somewhat low due to the slow excitation current build-up. Since the 4-level converter can obtain a addition high voltage to get fast excitation current and demagnetization current, so, it can improve dynamic performance easily. As a high performance SRM drive system with low torque ripple and high dynamic performance can be implemented. The validity of proposed method is verified by some computer simulations and comparative experiments.