• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.717-724
• /
• 2006

The major objective of this study is to investigate the effects and application of improvement for railway steel plate girder bridge by resilient panel track system. It analyzed the mechanical behaviors of steel plate girder bridge with applying resilient panel track system on the finite element analysis and laboratory test for static & dynamic characteristics. As a result, the improvement of steel plate girder bridge with resilient panel track systems are obviously effective for the static & dynamic response which is non-ballast steel plate girder bridge. The analytical and experimental study are carried out to investigate resilient panel track system decrease vertical acceleration and deflection on steel plate girder bridge for serviceability. And the resilient panel track system reduced dynamic maximum displacements (about 59%) and stresses (about 82%), the increase of dynamic safety is predicted by adopting resilient panel track system. From the dynamic test results of steel plate girder bridge, it is investigated that vertical acceleration and deflection is very low with applying resilient panel track system. The servicing steel plate girder bridge with resilient panel track system has need of the reasonable improvement measures which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.437-446
• /
• 2006

The major objective of this study is to investigate the effects and application of improvement for railway steel plate girder bridge by resilient panel track system. It analyzed the mechanical behaviors of steel plate girder bridge with applying resilient panel track system on the finite element analysis and laboratory test for static & dynamic characteristics. As a result, the improvement of steel plate girder bridge with resilient panel track systems are obviously effective for the static & dynamic response which is non-ballast steel plate girder bridge. The analytical and experimental study are carried out to investigate resilient panel track system decrease vertical acceleration and deflection on steel plate girder bridge for serviceability. And the resilient panel track system reduced dynamic maximum displacements(about 59%) and stresses(about 82%), the increase of dynamic safety is predicted by adopting resilient panel track system. From the dynamic test results of steel plate girder bridge, it is investigated that vertical acceleration and deflection is very low with applying resilient panel track system. The servicing steel plate girder bridge with resilient panel track system has need of the reasonable improvement measures which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.172-181
• /
• 1995

A control panel layout system was developed to generate an ergrnomically sound panel design. A constraint satisfaction concept was introduced as a framework of incorporating diverse ergonomic design guidelines into the panel layout. An efficient search algorithm which can find a constraint satisfaction solution within a reasonable time was developed based on preprocess and look ahead procedures with the backjumping technique. The proto- type panel layaout system was developed on a SPARC workstation. The constraint satisfaction algorithm was programmed in C language with Motif as a GUI tool under the X-windows environment. The effectiveness of the prototype paned layout system was examined by a case study.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.139-146
• /
• 2019

The purpose of this study is to propose the building design guideline considering photovoltaic panel installation through the analysis of relevant guidelines from home and abroad in terms of building design and solar panel installation. Conclusions can be summarized as followings; Considerations in building design : selection of the site with high solar accessibility, avoidance of the shade from the adjacent building & trees, south facing orientation of solar panel in building design, removal of shade on the solar panel from the part of building itself, load consideration of solar panel & fixing materials, safe passage securement for solar system maintenance, and planning of piping and mechanical room for solar system. Considerations in solar panel installation : harmonizing of solar panel with surrounding environment, unity of solar panel orientation & slope, regular maintenance of solar system, (in case of flat roof installation) solar panel installation afloat over the roof, installation area within the roof floor, and lower than parapet height, (in case of sloped roof installation) solar panel installation parallel with the roof slope, ventilation space securement below the panel, installation area within the roof surface, and similar material installation in empty space.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.102-106
• /
• 1997

The inluence of styrofoam-panel thickness of floating frame on the seedling growth of flue-cured tobacco(Nicotiana tabacum L.) in the newly developed direct-seed float system was investigated . Floating frame used instead of styrofoam-tray consisted of styrofoam-panel (106×108cm) for floating, eight holes(1.Sx2S.0 cm) to uniform the water, and nutrition supply far seedling and water and nutrition absorption cloth placed on the styrofoam-panel. Each floating-frame may lay eight plastic-trays on it. Eight grades of styrofoam-panel thickness from 26 mm to 46mm and two kinds of media were used in the greenhouse system. Dry cells were found from the styrofoam-panel thickness of 43mm in carbonized chaff, compost and original soil rate of L3-3(v/v) media, and of 37mm in peat and perlite rate of 8-2(v/v) media. The thinner styrofoam-panel produced more tender and succulent seedling with the more trunk and the less root weight. When considering the appearance of dry cell, seedling growth, producing healthy tobacco seedlings, and utilization of styrofoam-panel for two kinds of medias the ideal styrofoam-panel thickness were suggested to be around 34mm for flue-cured tobacco reeling production in the newly developed direct-seeding float system. Key words : tobacco seedlings, float system, medium, styrofoam pannel, dry cell.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.35-44
• /
• 2003

A Decal Panel is developed for the Night Vision Imaging System of XKO-1 aircraft. The Decal Panel is a kind of lighting system kits and is installed on each system switch box in crewstation. The Decal Panel consists of upper panel made of polycarbonate and lower panel which is a printed circuit board. This paper includes the design, manufacture, test and evaluation of Decal Panel in addition to items and conditions of environmental test. Besides it is confirmed the Key for manufacturing a decal panel, is depth of paint, dry time period and frequency, and diffusion material for spreading of light.

• Information Display
• /
• v.5 no.1
• /
• pp.5-12
• /
• 2004

디스플레이 시스템의 경량화, 저전력화, 박형, 저가격화를 가능하게 하는 System On Panel에 대한 중요성 및 관심이 모바일 디스플레이 환경을 중심으로 증가하고 있다. 디스플레이 패널에 내장할 수 있는 프로세서 및 다양한 모듈의 향후 전망을 위하여 집적측면의 Poly-Si TFT 공정 이슈 및 현재 프로세서집적 연구동향, 기존의 디스플레이 관련 프로세서의 아키텍쳐에 대한 소개 및 현재 System On Panel의 상황을 분석하여, 향후 System On Panel을 위한 디스플레이 시스템의 구현 방안 및 다양한 개발 방향을 소개한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.347_348
• /
• 2009

In this paper, we described the integrated monitoring system for low-voltage panel boards. This system consists of three parts, a panel board controller, an integrated monitoring unit and a remote PC. The panel board controller which was made of CT/PT unit, control unit and power supply is able to transmit variable parameter for monitoring and diagnosis of low voltage branch circuits. Also, the integrated monitoring unit was collected monitoring data from panel boards and displayed on the touch panel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1194-1202
• /
• 2011

A touch panel system has been one of the most widely used input devices. In this study, a touch panel embedded system using accelerometers is considered in order to make commercial white-boards or plates into touch panels. Three accelerometers are located at different positions on such a white board, so that touch points on the board can be identified using the sensors. For the identification of touch points, a TDOA (Time Difference of Arrivals) technique is applied in the algorithm which was implemented in a DSP board (TI 6713 DSK), which can provide a precise touch location by using the cross-correlation function of measured signals from the three accelerometers. Experiment results show that the touch panel system with accelerometers could provide the exact touch location. Thus a novel approach using such accelerometers could be applied to a new touch panel system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.