• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.45-61
• /
• 2005

Stance is defined as any state in which the total mass of the body is supported by the feet. In order to maintain stance, the sum of gravito-inertial forces acting on the body must be registered by equal and opposite forces at the region of contact between the organism and the support surface. Balance is controlled by applying forces to the surface of support so as to maintain the body's center of mass vertically above the feet. for a muIti-segment organism, there can be a variety of ways in which balance can be controlled, since movements of different body segments can have similar effects on the control of balance. In general, the organism tends to have a body configuration that is aligned with gravito-inertial force when there are no external forces acting on it. If any segments of the body are not aligned with gravito-inertial force vector, a torque on that segment would tend to move the body's center of mass. The maintenance of postural stability is accomplished in humans by a complex neural control system. This requires organizing integrating and acting upon visual, vestibular, and somatosensory input, providing orientation information to the postural control system. The information necessary to control and coordinate movement is provided by the visual sense of eye position with respect to the surrounding surface layout, the vestibular sense of head orientation in the gravito-inertial space, and the somatic sense of body segment position relative to one another and to the support surface. In this study, perception and action capability was examined from various points of view. The underlying assumption of the study was that the change of postural configuration could be effected by organism, environment and task goal.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1201-1208
• /
• 2016

Radio Frequency Identification (RFID) technology has a significant attraction throughout various industry sites, along with the development of wireless communication technologies. The typical applications of RFID include medical, logistics, and distribution, and, specially, it is effectively applied to non-contact environments, because it employs radio waves. Although, recently, construction cases of the RFID management systems for the inventory management of the construction materials have been increased, the related researches and experiments for the reused materials are not actively performed. In this paper, we propose the RFID system with the localization function for effectively managing the reuse of the construction materials, adding to the conventional inventory management system. The proposed system consists of a RFID reader unit and a receiver unit, and the location information of the material with the attached RFID tag is obtained by estimating the position of a RFID reader. The distance value for estimating the reader position is calculated using the Received Signal Strength Indicator (RSSI) value of Zigbee, and the performance evaluation of the proposed system is performed in the indoor space of $5m{\times}5m$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1209-1216
• /
• 2009

This paper presents the pose estimation of a small UAV utilizing visual information from low cost cameras installed indoor. To overcome the limitation of the outside flight experiment, the indoor flight test environment based on multi-camera systems is proposed. Computer vision algorithms for the proposed system include camera calibration, color marker detection, and pose estimation. The well-known extended Kalman filter is used to obtain an accurate position and pose estimation for the small UAV. This paper finishes with several experiment results illustrating the performance and properties of the proposed vision-based indoor flight test environment.

• International Journal of Contents
• /
• v.15 no.2
• /
• pp.75-78
• /
• 2019

The Integration technique of combining the measurement method with the fine precision of the sensor collecting the satellite-based information to determine the displacement space is available to a variety of diagnostic information. The measurement method by a GNSS with the sensors is needed since there will always be occasional occurrence of natural disasters caused by various environmental factors and the surroundings. Such attempts carried out nationally by distributed torsional displacement of the terrain and facilities. The combination of the various positioning analysis of mm-class for the facility of main area observed is required constantly in real time information of the USN/IoT Smart sensors and should be able to utilize such information as a precisely fine positioning information for the precisely fine displacement of the semi-permanent main facilities. In this study, for the installation of the receiving system, the USN/IoT base line positioning are easily accessible for the target bridges. Transmitting hourly from the received data is also executed in real time using the wireless Wi-Fi/Bluetooth bridges and related facilities to automatically process a fine position displacement. The results obtained from this method can be analyzed by real-time monitoring for a large structure or facilities for disaster prevention.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.859-867
• /
• 2015

This study proposes a robust formation flight control technique of multiple unmanned aerial vehicles(UAVs) using behavior-based decentralized approach. The behavior-based decentralized method has various advantages because it utilizes information of neighboring UAVs only instead of information of whole UAVs in the formation maneuvering. The controllers in this paper are divided into two methods: first one is based on position and velocity of neighboring UAVs, and the other one is based on position of neighboring UAVs and passivity technique. The proposed controllers assure uniformly ultimate boundedness of closed-loops system under time varying bounded disturbances. Numerical simulations are performed to validate the effectiveness of the proposed method.

• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.622-627
• /
• 2018

In this paper, we introduce an integrated augmented reality system using a small camera and a projector. We extract three-dimensional information of an object with a small portable camera and a projector by using a structured light system. We develop the concept of the virtual camera to generalize the projection method so that the image can be projected at a desired position with only the mesh of the object to be projected without computing the mapping between specific point sets. Therefore, it is possible to project not only simple planes but also complex curved surfaces to desired positions without complicated geometric calculation. Based on a robot with a small camera and a projector, it will largely explain the projector-camera system calibration, the calculation of the position of the recognized object, and the image projection method using the virtual camera concept.

• Spatial Information Research
• /
• v.13 no.2 s.33
• /
• pp.129-138
• /
• 2005

In this paper, a 3D position tracking algorithm for a moving objects using a stereo CCD cameras was proposed. This paper purposed the method to extract the coordinates of the moving objects. That is improve the operating and data processing efficiency. We were applied the relative orientation far the stereo CCD cameras and image coordinates extraction in the left and right images after the moving object segmentation. Also, it is decided on 3D position far moving objects using an acquired image coordinates in the left and right images. We were used independent relative orientation to decide the relative location and attitude of the stereo CCD cameras and RGB pixel values to segment the moving objects. To calculate the coordinates of the moving objects by space intersection. And, We conducted the experiment the system and compared the accuracy of the results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.201-211
• /
• 2013

In this paper, we propose a hand tracking and gesture recognition system. Our system employs a depth capture device to obtain 3D geometric information of user's bare hand. In particular, we build a flexible tracking volume and restrict the hand tracking area, so that we can avoid diverse problems caused by conventional object detection/tracking systems. The proposed system computes running average of the hand position, and tracking volume is actively adjusted according to the statistical information that is computed on the basis of uncertainty of the user's hand motion in the 3D space. Once the position of user's hand is obtained, then the system attempts to detect stretched fingers to recognize finger gesture of the user's hand. In order to test the proposed framework, we built a NUI system using the proposed technique, and verified that our system presents very stable performance even in the case that multiple objects exist simultaneously in the crowded environment, as well as in the situation that the scene is occluded temporarily. We also verified that our system ensures running speed of 24-30 frames per second throughout the experiments.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.91-97
• /
• 2009

This paper proposes novel FE-CBIRS that finds best position of a cut to be retrieved based on color feature distribution in digital contents of IPTV. Conventional CBIRS have used a method that utilizes both color and shape information together to classify images, as well as a method that utilizes both feature information of the entire region and feature information of a partial region that is extracted by segmentation for searching. Also, in the algorithm, average, standard deviation and skewness values are used in case of color features for each hue, saturation and intensity values respectively. Furthermore, in case of using partial regions, only a few major colors are used and in case of shape features, the invariant moment is mainly used on the extracted partial regions. Due to these reasons, some problems have been issued in CBIRS in processing time and accuracy so far. Therefore, in order to tackle these problems, this paper proposes the FE-CBIRS that makes searching speed faster by classifying and indexing the extracted color information by each class and by using several cuts that are restricted in range as comparative images.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.95-98
• /
• 2002

This paper presents a study on DSP(TMS320F240) controller design for multi-axes transportation system using BLDC servo motor. This BLDC servo motor controller was realized with DSP(Digital Signal Processor) and IPM (Intelligent Power Module). The multi-axes transportation system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector modulation technique. As CPU of controller DSP(TMS320F240) is adopted because, it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI(Serial Peripheral Interface) port and input/output port etc. The controller of multi-axes transportation system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downword command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC servo motor using DSP and IPM Between host system and middle digital signal processor communicate with RS-422, between main processor and controller communicate with SPI port.