• 대기
• /
• 제17권4호
• /
• pp.435-453
• /
• 2007

KEOP (Korea Enhanced Observing Period)-2004 intensive summer observation was carried out from 20 June to 5 July 2004 over the Southwestern part of the Korean peninsula. In this study, the effects of KEOP-2004 intensive observation data on the simulation of precipitation system are investigated using KLAPS (Korea Local Analysis and Prediction System) and PSU/NCAR MM5. Three precipitation cases during the intensive observation are selected for detailed analysis. In addition to the control experiments using the traditional data for its initial and boundary conditions, two sensitivity experiments using KEOP data with and without Jindo radar are performed. Although it is hard to find a clear and consistent improvement in the verification score (threat score), it is found that the KEOP data play a role in improving the position and intensity of the simulated precipitation system. The experiments started at 00 and 12 UTC show more positive effect than those of 06 and 18 UTC. The effect of Jindo radar is dependent on the case. It plays a significant role in the heavy rain cases related to a mesoscale low over Changma front and the landing of a Typhoon. KEOP data produce more strong difference in the 06/18 UTC experiments than in 00/12 UTC, but give more positive effects in 00/12 UTC experiments. One of the possible explanations for this is that : KEOP data could properly correct the atmosphere around them when there are certain amounts of data, while gives excessive effect to the atmospheric field when there are few data. CRA analysis supports this reasoning. According to the CRA (Contiguous Rain Area) analysis, KEOP data in 00/12 UTC experiments improve only the surrounding area, resulting in essentially same precipitation system so the effects remain only in each convective cell rather than the system itself. On the other hand, KEOP data modify the precipitation system itself in 06/18 UTC experiments. Therefore the effects become amplified with time integration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1794-1797
• /
• 2003

We developed a web-based virtual laboratory system for electronic circuit experiments on the client/ server distributed environment. Through our virtual laboratory, the learners will be capable of learning the concepts and theories related to electronic circuit experiments and how to operate the experimental equipments such as multimeters, function generators, digital oscilloscopes and DC power suppliers. The proposed virtual laboratory system is composed of four important components: Principle Classroom to explain the concepts and theories of electronic circuit operations, Virtual Experiment Classroom to provide interactive multimedia contents about the syllabus of off-line laboratory class, Assessment Classroom, and Management System. With the aid of the Management System every classroom is organically tied together collaborating to achieve maximum learning efficiency. We have obtained several affirmative effects such as high learning standard, reducing the total experimental hours and the damage rate for experimental equipments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2084-2100
• /
• 2020

Operating system (OS) kernel function call graphs have been widely used in OS analysis and defense. However, most existing methods and tools for generating function call graphs are designed for application programs, and cannot be used for generating OS kernel function call graphs. This paper proposes a virtualization-based call graph generation method called Acquire in Trap (AIT). When target kernel functions are called, AIT dynamically initiates a system trap with the help of a virtualization technique. It then analyzes and records the calling relationships for trap handling by traversing the kernel stacks and the code space. Our experimental results show that the proposed method is feasible for both Linux and Windows OSs, including 32 and 64-bit versions, with high recall and precision rates. AIT is independent of the source code, compiler and OS kernel architecture, and is a universal method for generating OS kernel function call graphs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.493-495
• /
• 1998

Robust design is one method to make manufacturing less sensitive to manufacturing process. Also it is cost effective technique to improve the quality process. This method uses statistically planned experiments to vary settings of important process control parameters. In this paper we apply fuzzy optimization and fuzzy logic system to robust design concept. First a method which uses fuzzy optimization in obtaining optimum settings by measured data from experiments will be presented. Second, fuzzy logic system is made to reduce experiments using experiments results consisted with key control parameter combinations. Then optimum parameter set points are obtained by the descrebed first fuzzy optimization method after prediction the results of each parameter combinations considering each control parameter variations by nonsingleton fuzzy logic system concept.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.228-232
• /
• 1992

The integrated management system IMMC system) is developed for machining, measuring and checking by using IBM-PC under Borland C $\^$++/ environment. MMC system consists of following systems : DNC system, MascMC system (for measuring and checking) and MascCAM system : DNC system, MascNC system (for measuring and checking) and MascCAM system (for CAM). And some other modules support MMC system for practical usages. A vertical machining center equipped with FANUC 0MC is used for experiments. Feasibility of the system is confirmed by a large amount of experiments.

• 한국시뮬레이션학회논문지
• /
• 제9권4호
• /
• pp.1-10
• /
• 2000

One of the primary goals of the simulation experiments is to understand the overall system behavior and to analyze the system, ultimately to optimize the system. Optimizing the system includes determining the optimum condition of the system parameters of interest. This paper is concerned with the simulation methodology for estimating the unknown objective function for the system of interest and optimizing the system with respect to the controllable factors. In the process of estimating the unknown objective function, which is assumed to be a second order spline function, we use common random numbers for different set of the controllable factors resulting in more accurate parameter estimation for the objective function. We will show some mathematical result for the benefit of using common random numbers.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.617-624
• /
• 1997

Over 100 experiments have been conducted at the University of Maryland to evaluate the performance of a water mist fire suppression system for protection of an interstitial space below a raised subfloor. Experiments are conducted as part of an ongoing research effort to compare the fire suppression capabilities of various water mist system designs in a raised subfloor space. Water mist system design parameters considered in the investigation include means of actuation, concentration of water mist required for extinguishment of fires, and delivery mechanisms of water mist within close proximity to the fire. Delivery of the required concentration of water mist within close proximity to the fire is a principal factor governing the adequacy of water mist systems. Two sets of experiments have been conducted to document the performance of water mist system designs. One set is involved in documenting the concentration of water mist as a function of position within the space. The second set of experiments is concerned with the ability of water mist system designs to control fires in the space. One result of the research is the assessment of the ability of a water mist system to control fires at particular locations as a function of water mist density at that location.

• 한국IT서비스학회지
• /
• 제16권1호
• /
• pp.55-72
• /
• 2017

Many of the studies of visual attention that are currently underway are seeking ways to make application systems that can be used in practice, and obtained good results using not only simulated images but also real-world images. However, despite that previous studies of selective visual attention are models intended to implement the human vision, few experiments verified the models with actual humans and there is no standardized data nor standardized experimental method for actual images. Therefore, in this paper, we propose a new performance evaluation techniques necessary for evaluation of visual attention systems. We developed an evaluation method for evaluating the performance of the visual attention system through comparison with the results of the human experiments on visual attention. Human experiments on visual attention is an experiments where human beings are instinctively aware of the unconscious when images are given to humans. So it can be useful for evaluating performance of the bottom-up attention system. Also we propose a new selective attention system that guides the user to effectively detect ROI regions by using spatial and temporal features adaptively selected according to the input image. We evaluated the performance of proposed visual attention system through the developed performance evaluation method, and we could confirm that the results of the visual attention system are similar to those of the human visual attention.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.17-22
• /
• 2021

The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.

• Educational Technology International
• /
• 제14권2호
• /
• pp.215-228
• /
• 2013

In engineering education practical experiments is very important for each student, but due to the limitation of time and available resources such as laboratory equipment, space and instructors enough hands-on real experiments could not be provided to all students enrolled in the program throughout the academic year. In this sense web-based remote experiments through internet become a solution for engineering education and an emerging new paradigm for students and teachers. This paper presents the development of the web-based remote vibration experiment system for mechatronics education. Students can access this experimental equipment through an internet and conduct vibration experiment remotely without any restriction on time and place. IP address for data communication and web-service are assigned in local computer and then students receive experimental results and the captured pictures using network. The developed system provides real-time feedback of the tested results. Ubiquitous access to the system gained popularity from students.