• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.13-18
• /
• 2016

KTX wheelset bearings have thus far been maintained in accordance with the maintenance system of French national railway company, SNCF. The overhaul cycle time (OCT) of KTX wheelset bearings is now 1.4 million km in mileage. This value, however, has not been validated in Korea that has much different railway environments with France. In fact, it is impossible to validate OCT of wheelset bearings directly because they are disassembled and cleaned only when some faults are detected. In this paper, the accuracy of the current OCT value was evaluated indirectly by investigating the effect of grease lubricants on the bearing life. Five grease samples (one new and four aged greases) were used in this study. Four aged greases of different conditions were obtained from four wheelset bearings whose mileages were about 0.3, 1.2, 1.3, and 1.8 million km, respectively. Each grease sample was then injected into the RCF (Rolling Contact Fatigue) tester and fatigue lifetime was experimentally estimated. In addition, the wt% of Fe in each grease sample was analysed. The experiment results reveal that the bearing lifetime is inversely proportional to the mileage of grease sample while the wt% of Fe increases with the mileage of grease sample. Based on the experimental results, it can be concluded that the current OCT value is appropriate for the first overhaul of wheelset bearings. However, further validation is required to determine the second and third OCT values.

• Industrial Engineering and Management Systems
• /
• v.8 no.4
• /
• pp.221-227
• /
• 2009

There are customer services jointly provided by two facilities so that each customer will complete the course made up of both facilities' sub-services. The two facilities are assumed invested respectively by an infrastructure owner and one subordinate facility owner, whose partnership is built on their capital investments. This paper presents a mathematical model of Stackelberg competition between the two facility owners to derive their optimal Nash equilibrium. In this study, each facility owner's profit is consisted of fixed revenue fractions of sold services, operating costs (including depreciation cost) and maintenance costs of her facility. The maintenance costs of one facility are incurred both by failures and deterioration due to usage. Moreover, for both facilities, failures are rectified immediately by minimal repairs and preventive maintenance is carried out at a fixed time epoch. Additional assumptions are also employed to develop the model such as customer arrivals are manipulated to follow a Poisson process, and each facility's lifetime is independently Weibull-distributed. The Stackelberg game proceeds as follows. At the first stage of decision making process, the infrastructure owner (acting as a leader) decides the allocation of revenue shares based on her self-interest. After observing the allocation of revenue shares, the subordinate facility owner determines her own optimal price of services. This paper investigates actions and reactions of the two partners in the system. Then analytical conditions are proposed to achieve a unique optimal Nash equilibrium. Finally, some suggestions for further research are discussed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.236-241
• /
• 2017

This paper presents a single-phase grid connected voltage-ed inverter with a power decoupling circuit. In the single-phase grid connected voltage-ed inverter, it is well known that a power pulsation with twice the grid frequency is contained in the input power. In a conventional voltage type inverter, electrolytic capacitors with large capacitance have been used in order to smooth the DC voltage. However, lifetime of those capacitors is shortened by the power pulsation with twice grid frequency. The authors have been studied a active power decoupling(APD) method that reduce the pulsating power on the input DC bus line, this enables to transfer the ripple energy appeared on the input DC capacitors into the energy in a small film capacitor on the additional circuit. Hence, extension of the lifetime of the inverter can be expected because the small film capacitor substitutes for the large electrolytic capacitors. Finally, simulation and experimental results are discussed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.25-30
• /
• 2004

This paper gives an assessment criteria and average failure lifetime prediction for power supply of electrodeless fluorescent lamp. The paper present electric appliance safety standard and performance standard for power supply of electrodeless fluorescent lamp. also, It presents the Failure Rate or Mean Time To Failure(MTTF) for power supply of electrodeless fluorescent lamp. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electrodeless fluorescent system.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.459-473
• /
• 1998

As the satellite system becomes more complex, the probability of unpredictable failures may be increased due to design inadequacy, experience deficiency, lack of problem recognition. Poor quality control, improper testing, and workmanship fault. Consequently, these problems can lead to the reduction or end of the satellite mission lifetime. This article addresses general satellite failure modes and factors influencing satellite mission life. The mission life factors of LEO sun-synchronous KOMPSAT spacecraft are investigated, in which its mission life is predicted based on these factors. Since the end of mission due to random failures is not predictable, the predictable mission life factors such as power budget, propellant budget, battery charging/discharging cycle, radiation effects payload reliability, single point failure, and redundancy are primarily investigated.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.23-29
• /
• 2009

This paper presents a capacity estimation of a storage system accumulating all data sensed during the lifetime of an individual human being. The calculation assumes modern data compression and data collection schemes based on wearable or implanted devices under ubiquitous environment. More than 76% of the storage area is found to be used for video data storage of common TV image quality. The remaining storage area is for data from other sensing organs including audio, taste, olfactory and tactual systems in addition to indexing information. Total storage area of around 600 tera bytes is needed to cover 100 years of human life including his fetal period.

• Korean Management Science Review
• /
• v.31 no.4
• /
• pp.151-163
• /
• 2014

The sports industry is expected to develop into a huge business through convergence with existing industries such as the broadcasting/information communications, health/medicine, and entertainment/leisure. This paper aims to extract and analyse the candidated promising sports industries at the national level in order to promote them in the long term, and adopts a policy-based approach to such efforts. To extract promising sports industries at the national level, a methodology that considers economic effects such as global competitiveness, technological characteristics, and the creation of jobs, as well as technical development projects, should be adopted. In this study, It was extracted 59 candidated promising sports industries using literature review and expert opinions. As a result of in-depth survey, we found some critical implications each area as follows; health club operation in the lifetime and participation sports area, female sports dance in the welfare sports area, new material sports shoes in the lifetime and welfare sports area, and dynamic training system in the professional sports area.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.514-523
• /
• 2017

In this paper, we propose Adaptive Writeback-aware Cache management (AWC) to prolong the lifetime of non-volatile main memory systems by reducing the number of writebacks. The last-level cache in AWC is partitioned into Least Recently Used (LRU) segment and LRU using Dirty block Precedence (DP-LRU) segment. The DP-LRU segment evicts clean blocks first for giving reuse opportunity to dirty blocks. AWC can also determine the efficient size of DP-LRU segment for reducing the number of writebacks according to memory access patterns of programs. In the performance evaluation, we showed that AWC reduced the number of writebacks up to 29% and 46%, and saved the energy of a main memory system up to 23% and 49% in a single-core and multi-core, respectively. AWC also reduced the runtime by 1.5% and 3.2% on average compared to previous cache managements for non-volatile main memory systems, in a single-core and a multi-core, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1418-1420
• /
• 2008

In this paper, the light emitting efficiency, spectrum, and the lifetime of the phosphorescent devices, whose emission characteristics are strongly dominated not only by the energy transfer but also by the charge carrier trapping induced by the emissive dopant, are explained by differences in the energy levels of the host, dopant, and nearby transport layers. On the basis of our finding on device performance and photocurrent measurement data by time-of-flight (TOF), we investigated the effect of the difference of carrier trapping dopant and properties of the host materials on the efficiency roll-off of phosphorescent organic light emitting diode (OLED), along with a physical interpretation and practical design scheme, such as a multiple host system, for improving the efficiency and lifetime of devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.11
• /
• pp.1003-1008
• /
• 2002

In this paper, the estimation of lifetime with the various conditions of the interface between toughened epoxy and rubber which are consisting materials of underground power delivery system has been studied. After the measurement of the short time AC interfacial breakdown strength on macro interfaces at room temperature, the breakdown time at several voltages were measured under the constant voltages lower than the short time breakdown voltage. The long time breakdown voltage was calculated by using Inverse Power Law. Two types of interfaces was studied. One was the interface between toughened epoxy and EPDM(Ethylene Prorylene Diene Terpolymer). The other was the interface between toughened epoxy and silicon rubber. Interfacial pressure and roughness of interfaces was determined through the characteristic of short time AC interfacial breakdown strength. Oil condition was no oiled, low viscosity oiled and high viscosity oiled. High viscosity oiled interface between Toughened epoxy and silicon rubber had the best lifetime exponent, 20.69. and the breakdown voltage of this interface after 30 years was evaluated 19.27㎸.