• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.443-452
• /
• 2016

Current low-altitude radar system often fails to detect small unmanned aerial vehicles (UAV) because of their small radar cross section (RCS) compared with larger targets. As a potential alternative, a passive bistatic radar system has been considered. We study an optimal deployment problem for the passive bistatic radar system. We model this problem as a covering problem, and develop an integer programming model. The objective of the model is to maximize coverage of a passive bistatic radar system. Our model takes into account factors specific to a bistatic radar system, including bistatic RCS and transmitter-receiver pair coverage. Considering bistatic RCS instead of constant RCS is important because the slight difference of RCS value for small UAVs could significantly influence the detection probability. The paired radar coverage is defined by using the concept of gradual coverage and cooperative coverage to represent a realistic environment.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.75-80
• /
• 2004

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1769-1777
• /
• 2018

This paper proposes a method for optimal placement of Phasor Measurement Units (PMUs) considering system configuration and its attributes during the planning phase of PMU deployment. Each bus of the system is assessed on four diverse attributes; namely, redundancy of measurements, rotor angle and frequency monitoring of generator buses, reactive power deficiency, and maximum loading limit under transmission line outage contingency, and a consolidated 'degree of criticality' is determined using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The major contribution of the proposed work is the development of modified objective function which incorporates values of the degree of criticality of buses. The problem is formulated as maximization of the aggregate degree of criticality of the system. The resultant PMU configuration extends complete observability of the system and majority of the PMUs are located on critical buses. As budgetary restrictions on utilities may not allow installation PMUs even at optimal locations in a single phase, multi-horizon deployment of PMUs is also addressed. The proposed approach is tested on IEEE 14-bus, IEEE 30-bus, New England (NE) 39-bus, IEEE 57-bus and IEEE 118-bus systems and compared with some existing methods.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.179-184
• /
• 2008

The aim of this paper is to establish the evaluation system of port logistics of Incheon using the QFD(Quality Function Deployment) model. The research methodology is consisted of four phases. The first step is to investigate the important factors consisting the port logistics of Incheon and then calculate the weighting of factors by Analytic Hierarchy Process (AHP). The second step is to draw out the degree of inter-relation among factors by Fuzzy Subordination Relations (FSR). At the third step, the established system through the QFD method using results of the first and second steps will be used to evaluate and diagnosis the level of port logistics of Incheon. Finally, the sensitivity analysis will be performed and the degree of improving port logistics will be presented according to the rising the relevant factors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1515-1521
• /
• 2013

AIS is a core service in the maritime safety domain. AIS Message type #6 and #8(for binary date) can be used for carrying any kind of MSI(Maritime Safety Information). The MSC(Maritime Safety Committee) approved SN/Circ. 289 on Guidance on the use of AIS Application-Specific Messages in 2010. The MSI that carried by AIS-ASM can support to reduce the maritime accidents. Since a new AIS-ASM service places an additional load on the VDL(VHF Data Link), there should be a deployment process for new AIS-ASM services. In this paper we analyze the AIS-ASM services and survey the extended functions and systems for each AIS-ASM service. We also present the survey of the statistical analysis of local AIS messages. and suggest preliminary research topics for the deployment of new AIS-ASM services. VDL monitoring system, system for detection and removal of malfunctioning AIS equipments, and value analysis process of the MSI services are required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.193-197
• /
• 2015

Recently, the new issues for the safety and the information delivery system in the ship are raised. The deployment and the efficient algorithms of deploying the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by reshaping some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-three way slave mode are designed and its measureed data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system with the three way algorithm for the deployment of the shipboard wireless networks can be achieved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.62-68
• /
• 2023

An aerial relay system utilizing an unmanned aerial vehicle(UAV) or drone is addressed for event-driven operations such as temporary communication services for disaster affected area, military and first responder support. UAV relay system (URS) targets to provide a reliable communication service to a remote user equipment or an operator, therefore, a fast UAV placement to guarantee a minimum quality of service(QoS) is important when an operation is requested. Researches on UAV utilization in communication systems mostly target to derive the optimal position of UAV to maximize the performance, however, fast deployment of UAV is much more important than optimal placement under emergency situations. To this end, this paper derives the feasible area for UAV placement, investigates the effect of performance requirements on that area, and suggests UAV placement to certainly guarantee the performance requirements. Simulation results demonstrate that the feasible area derived in this paper matches that obtained by an exhaustive search.

• Journal of IKEEE
• /
• v.11 no.3
• /
• pp.100-107
• /
• 2007

One of the fundamental problems in wireless sensor networks is the efficient deployment of sensor nodes. The Fuzzy C-Means(FCM) clustering algorithm is proposed to determine the optimum location and minimum number of sensor nodes for the specific application space. We performed a simulation and a experiment using two rectangular and one L shape area. We found the minimum number of sensor nodes for the complete coverage of modeled area, and discovered the optimum location of each nodes. The real deploy experiment using sensor nodes shows the 94.6%, 92.2% and 95.7% error free communication rate respectively.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.318-329
• /
• 2018

Femtocell (FC) technology envisaged as a cost-effective approach to attain better indoor coverage of mobile voice and data service. Deployment of FCs over macrocell forms a heterogeneous network. In urban areas, the key factor limits the successful deployment of FCs is inter-cell interference (ICI), which severely affects the performance of victim users. Autonomous FC transmission power setting is one straightforward way for coordinating ICI in the downlink. Application of intelligent control using soft computing techniques has not yet explored well for wireless networks. In this work, autonomous FC transmission power setting strategy using Adaptive Neuro Fuzzy Inference System is proposed. The main advantage of the proposed method is zero signaling overhead, reduced computational complexity and bare minimum delay in performing power setting of FC base station because only the periodic channel measurement reports fed back by the user equipment are needed. System level simulation results validate the effectiveness of the proposed method by providing much better throughput, even under high interference activation scenario and cell edge users can be prevented from going outage.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.315-318
• /
• 2006

This paper concerns about coupled dynamic analysis of the deep-seabed mining system in launching operation. The dynamic behavior of mining system consisting of lifting pipe, buffer station, flexible conduit and self-propelled miner is simulated in time domain. The launching operation is divided into four critical phases: (1) deployment of miner and flexible conduit, (2) deployment of lifting pipe, flexible conduit and miner, (3) touch-down of miner, (4) final launching. The dynamic responses of sub-systems - miner, flexible conduit, buffer and lifting pipe - are analyzed in each launching phase. According to the changing periods of forced excitation at the top, the dynamic responses of sub-systems are diverse in their characteristics. It has been shown that the total integrated responses of sub-systems are strongly affected by the design parameters. Especially, the principal dimensions of flexible conduit seem to be significant in determining of the global response. Based on the simulation results, safe operation conditions are investigated.