• Journal of Korean Society for Quality Management
• /
• v.28 no.2
• /
• pp.176-191
• /
• 2000

Configuration Management (CM) is a management discipline that applies technical and administrative direction to the development, production and support life cycle of a configuration item. This paper introduces an application of this disicipline to ISO 9000 quality systems. A proto type CM information system caned CM / ISO 9000 is implemented via a comparison and anal37sis of CM standards such as ISO 10007, MIL-STD-2549 and EIA Standard IS-649. This system demonstrates 4 basic CM functions consisting of configuratin identification, change control, configuration status accounting and configuration audit. In the system, configuration items such as documents and drafts can be managed to ensure effective ISO 9000 quality systems. Implementation is supported by IDEF0, IDFF1x in modeling, MS SQL Server Ver. 7.0 as DBMS and Visual Basic Ver. 6.0 for interface programming.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4733-4738
• /
• 2013

This paper proposes a method to obtain the dynamic equilibrium configuration of a constrained mechanical system by using multibody dynamic analysis. Dynamic equilibrium equations with independent coordinates are derived from the time-dependent constraint equations and dynamic equations of a multibody system. The Newton-Raphson method is used to find numerical solutions for nonlinear algebraic equations that are composed of the dynamic equilibrium and constraint equations. The proposed method is applied to obtain the dynamic equilibrium configuration of a speed governor, and the results are verified on the basis of the results from conventional dynamic analysis. Furthermore, vertical displacements at equilibrium configuration, which varied with the rotational velocity of the speed governor, are calculated, and design parameter analysis of the equilibrium configuration is presented.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.533-543
• /
• 2022

Purpose: The purpose of this study is to identify and resolve the causes of defects in the unmanned aerial vehicle launch system(propulsion wire fracture, rear rail deformation) and to prevent recurrence. Methods: The causes of the two defects were derived through fault tree analysis for each of the two defects and fault reproduction tests. In the case of propulsion wire, the installation of a high speed camera to check the behavior of wire was the driving force behind the defect resolution. Results: The results of this study are as follows; It was determined that the thickness of the washer was less than the maximum tolerance of the pulley was the cause of the propulsion wire fracture defect. Failure to comply with the launch procedure and insufficient safety margin were judged as the cause of the rear rail deformation defect. Accordingly, the configuration was changed to remove each defect. Conclusion: The case of this study was conducted to eliminate defects in the launch system for UAV. The causes of defects were estimated through fault tree analysis. After the configuration change, Structural analysis and launch tests were performed to demonstrate the safety and effectiveness of the modified configuration. As a result, the effect of the modified configuration was verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.161-166
• /
• 1998

As a part of the configuration design expert system of machine tools, inference mechanisms are constructed in this paper. In addition to procedural inference, the method of multivariable inference is considered as an efficient approach to deal with the cases of highly coupled condition. We propose a generalized multi-variable inference procedure. The procedure is applied to the type selection module of the configuration design expert system of machine tools in order to demonstrate the efficiency and validity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.58
• /
• pp.29-39
• /
• 2000

This paper concerns the location of the transit point between adjacent loops and guide direction of loops in the tandem configuration manufacturing system. The tandem configuration has been used to solve control problems like the vehicle dispatching and traffic control. The transit point between loops needs to deliver the parts from one loop to another. The location of transit point between adjacent loops and direction of loops must be determined to minimize the total travel time of parts in the manufacturing system. The model formulation is developed, a numerical example is shown.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.25-37
• /
• 2019

Power-line communication (PLC) has influenced smart grid development. In addition, PLC has also been instrumental in current research on internet-of-things (IoT). Due to the implementation of PLC in smart grid and IoT environments, strides have been made in PLC and its combination with the wireless system to form a hybrid communication system. Also, PLC has evolved from a single-input-single-output (SISO) configuration to multiple-input-multiple-output (MIMO) configuration system, and from a point-to-point communication system to cooperative communication systems. In this work, we extend a MIMO wireless two-way amplify-and-forward (AF) cooperative communication system to a hybrid PLC and wireless (PLC/W) system configuration. We then maximize the weighted sum-rate for the hybrid PLC/W by optimizing the precoders at each node within the hybrid PLC/W system. The sum-rate problem was found to be non-convex, therefore, an iterative algorithm is used to find the optimal precoders that locally maximize the system sum-rate. For our simulation results, we compare our proposed hybrid PLC/W configuration to a PLC only and wireless only configuration at each node. Due to an improvement in system diversity, the hybrid PLC/W configuration outperformed the PLC only and wireless only system configurations in all simulation results presented in this paper.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.217-224
• /
• 2000

Configuration은 도메인 지식을 이용해서 주어진 모든 요구를 충족시키는 컴포넌트를 갖는 시스템을 구성하기 위한 기술이다. 최근 전자 상거래는 역경매, 공동구매, 사용자 프로파일에 의한 제품의 추천 등 다양한 방식으로 구매자 중심의 사거래 행위를 하고 있다. 하지만 아직도 전문 지식이 필요한 제품의 구입시에 구매자는 많은 어려움을 겪고 있다. 이러한 구매자의 행위를 보조하기 위한 수단으로써 전문가 시스템에서 수년간 연구되어 온 Configuration 기술을 확장 도입하였다. 본 논문에서는 도메인에 대한 규칙(Rules)에 기반해서 Classification Problem Solving 방법과 Constructive Problem Solving 방법을 적용하였다. 구매자와의 능동적인 질의 수행을 하여 제품에 대한 요구를 정확히 한 뒤, 얻어진 사실(Facts)을 Classification Problem solving에 이용이 되어 제품 모델이 결정된다. 이 제품 모델은 구매자를 위해 특성화 되어 있기 않기 때문에, Constructive Problem Solving을 이용한다. 이런 내용을 기반으로 컴퓨터 조립을 위한 Configurator를 디자인하고 구현했다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2004.11a
• /
• pp.233-241
• /
• 2004

본 논문에서는 분산된 관리대상의 시스템자원과 사용자정보, 사용패턴을 Context로 수집하여, 구성(Configuration)을 수행하는 적응형 자가관리시스템을 제안한다. 본 시스템은 기존에 수동으로 이루어지던 Configuration 작업들 (Install, Reconfiguration, Update)을 자율적으로 수행하여, 사용자의 시스템관리에 대한 부담을 줄여주게 되며, 많은 비용과 오류를 감소시켜준다. 본 시스템은 수집된 Context 정보를 기반으로 사용자의 환경에 맞는 구성요소를 선택하여 설치하게 되며, 사용자의 기존 애플리케이션의 환경설정과 사용패턴을 기반으로, 보다 개인화된 설정을 해준다. 설정 이후에는 사용자의 행동을 암시적 피드백으로 받아, 이를 학습하고 유사한 상황이 다시 발생할 경우, 이를 다음 행동에 반영한다. 그리고 기존에 중앙서버로부터 일률적으로 관련파일을 전송하고 관리하는 중앙집중배포방식의 여러 문제점에 대응하기 위해 Peer-to-Peer 방식으로 파일을 카피하고, 이를 통해 중앙서버의 과부하를 줄이는 동시에 빠른 파일의 배포가 가능하도록 하였다. 본 시스템의 평가를 위해 프로토타입을 구현하여, 기존 수동 Configuration작업, MS-IBM과 같은 관련시스템과의 비교를 수행하였으며, 기능적 측면과 작업에 소요되는 시간에 대한 비교결과를 통해 본 시스템의 유효성을 증명하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.51-58
• /
• 2008

A version control system is used in a rapidly changed environment or a program which developed in a complicated environment. it is a problem of configuration thread in supporting information that we, in this method, can't know a exactly well-defined configuration rule information and a predefined information. In this paper. Library system is suggested, modelled, and implemented so as to configuration thread control the components required by the user in many ways. As for the library used in the configuration thread control suggested in this paper, the components can be retrieved from the library regardless of the infrastructure, applying the extended facet classification. This retrieval framework is managed using TreeSearch class and the configuration thread control function. The library system of this paper can be used by the interface with other languages, and this system is to have a advantage to extend a facet by user.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.172-180
• /
• 1999

The major subject of this paper is to develop the concept fur a Korea high speed train system and recommend to train configuration. High speed train configurations are basically concerned traction power(train configurations with concentrated; CPT or distributed Power system: DPT) and train design(single car as compared with articulated bogies). The result of configuration, a advantages and disadvantaged were necessitated by different train configurations; -distributed underfloor power have an increased length for the seats by 15% as compared with the concentrated power trait - articulated trainsets are characterised by less of number of bogies and reduced values of mass, train resistance, noise and vibration. from the result, the optimized train concept combining high seat capacity per train length with low weight and train resistance is 400m long, single -floor train composed of two symmetrically arranged half trainsets. Therefore, at this work recommended distributed train system However, the final decision of Korea high speed train configuration was concentrated power train and articulated bogie system. The configuration of trainset was 20cars included 2 power cars, 4 motorized cars and 14 trailer cars.