• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.750-750
• /
• 2002

The Airship PKNU is a roughly 12 m (32 ft) long blimp, filled with helium, whose two-gasoline power(3hp per engine) are independently radio controlled. The motors and propellers can be tilted and are attached to the gondola through an axle and supporting braces. Four stabilizing fins are mounted at the tail of the airship. To fill in the helium, a valve is placed at the bottom of the hull. The inaugural flight was on jul. 31.2002 at the Pusan, S.korea Most environment monitoring system\ problem use satellite image. But, Low resolution satellite image (multi-spectral) : 1km ∼ 250 m ground resolutions is lows. So, detail information acquisition is hard at the complex terrain. High resolution satellite image (black and white) 30m : The ground resolution is high. But it is high price, visit cycle and delivery time is long So. We want make high accuracy airship photogrammetry system. This airship can catch picture Multi. spectral Aerial photographing (visible, Near infrared and thermal infrared), and High resolution (over 6million pixel). It can take atmosphere datum (Temperature (wet bulb, dew point, general), Pressure (static, dynamic), Humidity, wind speed). this airship is very Quickness that aircraft install time is lower than 30 minutes, it is compact and that conveyance is easy. High-capacity save image (628 cut per 1time (over 6million and 4band(R,G,B,NIR)) and this airship can save datum this High accuracy navigatin (position and rotate angle) by DGPS tech. and Gyro system. this airship will do monitor about red-tide, sea surface temperate, and CH-A, SS and etc.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.1
• /
• pp.193-201
• /
• 2015

The aims of this study were to investigate (1) the status of food materials purchased by group-buying companies and (2) the satisfaction with food materials and service quality of group-buying companies in foodservice at child-care centers. In November 2013, child-care centers which were participated in a group-buying program in Gwanak-gu, Seoul were requested to complete self-reported questionnaires. One hundred and eight respondents (76.9% of directors, 23.1% of non-directors) completed questionnaires, including purchase frequency of food materials, degree of satisfaction with 'food materials' and 'operating system and service' of group-buying companies. About 60% of child-care centers purchased food materials from major companies. Respondents' overall satisfaction with 'food materials' and 'operating system and service' were '3.55' and '3.72' out of 5 points, respectively. For overall satisfaction with food materials, there were significant differences between 'public (3.79)' and 'private, home-based (3.31)' child-care centers (p=0.023). The results of multi-regression analysis showed that quality (${\beta}$=0.271, p=0.013) and price appropriateness (${\beta}$=0.284, p=0.002) were associated with overall satisfaction with food materials purchased by group-buying companies. The factors such as delivery accuracy about items(${\beta}$=-0.201, p=0.042), hygiene of delivery process (${\beta}$=-0.207, p=0.025) and communication with companies (${\beta}$=-0.317, p=0.003) were significantly associated with overall satisfaction with operating system and service provided by group-buying companies. The results of this study could be utilized for group-buying companies and the government to develop guidelines and policies on food material buying in foodservice at child-care centers.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.33-37
• /
• 2008

The evidence of the Cargo tank volume is very important between Buyer and Seller for agreement each other for LNG Ship. CTS(Custody Transfer System) Radar type level gauging sensor to be measured for cargo volume. The data of Trim & List sensor to be compensated for measuring data which is original data of the CTS sensor. The latest days, the Buyer would have posed a problem both the location and the accuracy of trim/list sensor specially neared final stage of the ship's delivery. So, we would like to report the introducing to the trim/list sensor and the confirmation of actual location for the trim/list sensor.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.1
• /
• pp.45-56
• /
• 2001

In the supply chain, The ATP function doesn't only give customers to confirmation of delivery. It can be used by the core function with ATP rule that can reconcile supplies and demands on the supply chain. Therefore We can acquire the conformation about accuracy on the due date of supplier by using the ATP function of management about real and concurrent access on the supply chain, also can decide the affect about product availability due to forecasting or customer's orders through the ATP. This study analyze the data concerned with ATP and define the necessity on a SCM solution. Under the these environments, after defining the ATP rule that can improve the customer value and data flow related the CRM, we propose the advanced ATP model that proposes the method and classification system that can flexibly aggregate the ATP data with ATP rule on the supply chain.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.317-318
• /
• 1998

The purpose of this study is to design and develop the circuit of the dual mode syringe pump. Syringe pump is used in intensive care unit, delivery room, pediatric room, operating theater and other fields of hospital at present. Normally the syringe pump delivers one medicine in one case, but in case of intensive care unit, it is necessary to deliver more than two kinds of medicines at a time. Therefore we have designed dual mode syringe pump. We used RISC type microcontroller, PIC17C44 as master controller, and PIC16C73 as slave cpu using for the low power consumption. The performance of system is evaluated by analysis of the linearity and accuracy which is the most important factors in application. While the proposed system shows a acceptable linearity and accuracy, a further research about reducing the errorr should be done.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.33-40
• /
• 2013

Purpose: The purpose of this study was to evaluate the possibility to optimize the gated treatment delivery time and maintenance of stable respiratory by the introduction of breath with the assistance of auditory-visual-tactile sense. Materials and Methods: The experimenter's respiration were measured by ANZAI 4D system. We obtained natural breathing signal, monitor-induced breathing signal, monitor & ventilator-induced breathing signal, and breath-hold signal using real time monitor during 10 minutes beam-on-time. In order to check the stability of respiratory signals distributed in each group were compared with means, standard deviation, variation value, beam_time of the respiratory signal. Results: The stability of each respiratory was measured in consideration of deviation change studied in each respiratory time lapse. As a result of an analysis of respiratory signal, all experimenters has showed that breathing signal used both Real time monitor and Ventilator was the most stable and shortest time. Conclusion: In this study, it was evaluated that respiratory gated radiation therapy with auditory-visual-tactual sense and without auditory-visual-tactual sense feedback. The study showed that respiratory gated radiation therapy delivery time could significantly be improved by the application of video feedback when this is combined with audio-tactual sense assistance. This delivery technique did prove its feasibility to limit the tumor motion during treatment delivery for all patients to a defined value while maintaining the accuracy and proved the applicability of the technique in a conventional clinical schedule.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.30 no.2
• /
• pp.71-90
• /
• 2021

The virtual patient dataset is a collection of diagnostic data from various sources acquired from a single patient into a coordinate system of three-dimensional visualization. Virtual patient dataset makes it possible to establish a treatment plan, simulate various treatment procedures, and create a treatment planning delivery device. Clinicians can design and simulate a patient's smile on the virtual patient dataset and select the optimal result from the diagnostic process. The selected treatment plan can be delivered identically to the patient using manufacturing techniques such as 3D printing, milling, and injection molding. The delivery of this treatment plan can be linked to the final prosthesis through mockup confirmation through provisional restoration fabrication and delivery in the patient's mouth. In this way, if the diagnostic data superimposition and processing accuracy during the manufacturing process are guaranteed, 3D digital smile design simulated in 3D visualization can be accurately delivered to the real patient. As a clinical application method of the virtual patient dataset, we suggest a decision-making method that can exclude occlusal adjustment treatment from the treatment plan through the digital occlusal pressure analysis. A comparative analysis of whole-body scans before and after temporomandibular joint treatment was suggested for adolescent idiopathic scoliosis patients with temporomandibular joint disease. Occlusal plane and smile aesthetic analysis based on the virtual patient dataset was presented when treating patients with complete dentures.

• Journal of Genetic Medicine
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2010

Purpose: To find the most effective method for extraction of cell-free DNA (cf-DNA) from maternal plasma, we compared a blood DNA extraction system (blood kit) and a viral DNA extraction system (viral kit) for non-invasive first-trimester fetal gender determination. Materials and Methods: A prospective cohort study was conducted with maternal plasma collected from 44 women in the first-trimester of pregnancy. The cf-DNA was extracted from maternal plasma using a blood kit and a viral kit. Quantitative fluorescent-polymerase chain reaction (QF-PCR) was used to detect the SRY gene and AMEL gene. The diagnostic accuracy of the QF-PCR results was determined based on comparison with the final delivery records. Results: A total of 44 women were tested, but the final delivery record was only obtained in 36 cases which included 16 male-bearing and 20 female-bearing pregnancies. For the blood kit and viral kit, the diagnostic accuracies for fetal gender determination were 63.9% (23/36) and 97.2% (35/36), respectively. Conclusion: In non-invasive first-trimester fetal gender determination by QF-PCR, using a viral kit for extraction of cf-DNA may result in a higher diagnostic accuracy.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.601-611
• /
• 2016

As oral trial principle and civil participation in criminal trials spread, the environment of Korean courtroom is in need of a systematic introduction of trial presentation which can supplement with the oral trial presentation's weakness. Therefore this study analyzes the definition, types, and effectiveness of trial presentation, considering characters of the Korean court's environment. As for following research step, the most widely used trial presentation softwares in the USA and Korea are analyzed and compared in consideration of the particularity of the trial presentation. Based on this analysis, this study suggested elements to be included in the presentation software optimized for Korean court's environment as follows: 1. Ease of the insertion of various forms and media, 2. Appropriate limitation of the spectrum for graphic style, 3. Ease of use of graphics tools, 4. System functions. Such a suggestion was proposed not only to enhance the clarity, accuracy, effectiveness in developing insistence and delivery of content, but also promote aesthetic quality and consistency of presentation's visual communication aspect.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.91-98
• /
• 2012

Verification of internal organ motion during treatment and its feedback is essential to accurate dose delivery to the moving target. We developed an offline based internal organ motion verification system (IMVS) using cine EPID images and evaluated its accuracy and availability through phantom study. For verification of organ motion using live cine EPID images, a pattern matching algorithm using an internal surrogate, which is very distinguishable and represents organ motion in the treatment field, like diaphragm, was employed in the self-developed analysis software. For the system performance test, we developed a linear motion phantom, which consists of a human body shaped phantom with a fake tumor in the lung, linear motion cart, and control software. The phantom was operated with a motion of 2 cm at 4 sec per cycle and cine EPID images were obtained at a rate of 3.3 and 6.6 frames per sec (2 MU/frame) with $1,024{\times}768$ pixel counts in a linear accelerator (10 MVX). Organ motion of the target was tracked using self-developed analysis software. Results were compared with planned data of the motion phantom and data from the video image based tracking system (RPM, Varian, USA) using an external surrogate in order to evaluate its accuracy. For quantitative analysis, we analyzed correlation between two data sets in terms of average cycle (peak to peak), amplitude, and pattern (RMS, root mean square) of motion. Averages for the cycle of motion from IMVS and RPM system were $3.98{\pm}0.11$ (IMVS 3.3 fps), $4.005{\pm}0.001$ (IMVS 6.6 fps), and $3.95{\pm}0.02$ (RPM), respectively, and showed good agreement on real value (4 sec/cycle). Average of the amplitude of motion tracked by our system showed $1.85{\pm}0.02$ cm (3.3 fps) and $1.94{\pm}0.02$ cm (6.6 fps) as showed a slightly different value, 0.15 (7.5% error) and 0.06 (3% error) cm, respectively, compared with the actual value (2 cm), due to time resolution for image acquisition. In analysis of pattern of motion, the value of the RMS from the cine EPID image in 3.3 fps (0.1044) grew slightly compared with data from 6.6 fps (0.0480). The organ motion verification system using sequential cine EPID images with an internal surrogate showed good representation of its motion within 3% error in a preliminary phantom study. The system can be implemented for clinical purposes, which include organ motion verification during treatment, compared with 4D treatment planning data, and its feedback for accurate dose delivery to the moving target.