• 한국의류학회지
• /
• 제5권1호
• /
• pp.15-21
• /
• 1981

The effect of fatty acid content in oily soil and conditions of washing on the removal of triglyceride have been studied. Cotton lawn was soiled with the four-component soil-tripalmitin, palmitic acid, dodecyl alcohol and dodecane-and washed in constant temperature waterbath shaker. The detergency was estimated by analysis of triglyceride labelled carbon-14 on fabrics before and after washing by means of liquid scintillation counting. It was shown that the detergency of triglyceride washed with the nonionic, nonylphenol poly (10)-ethylene oxide and soap was increased steadily with increasing temperature, whereas with the anionics Na-DBS and SLS, the detergency was rather decreased when the temperature was elevated above $40^{\circ}C$. To investigate the effects of free fatty acid content in soil on the removal of triglyceride, the fabrics were soiled altering palmitic acid content, and then washed. From the results, the detergency of triglyceride was developed with increasing free fatty acid content. With soils containing less than $30\%$ of free fatty acid, of the three detergents tested, the nonionic was by far the most effective soil removal. Soap was intermediate and the synthetic anionic was the poorest. With soil containing $45\%$ of free fatty acid, soap was the most effective soil removal. When NaOH was added to detergent solution. the detergency of triglyceride was improved without regard to detergents. The optimum alkalinity was obtained according to free fatty acid content. And the alkalinity changed to low NaOH concentration with increasing free fatty acid content. From the results mentioned above, it could be concluded that the major removal mechanisms of triglyceride containing oily soil were mesomorphic phase formation, solubilization and soap forma-tion when alkali was added in detergent solution.

• 대한화학회지
• /
• 제62권2호
• /
• pp.118-123
• /
• 2018

The hexagonal tungsten bronze $Cs_xWO_3$ nanoparticle was synthesized by a chemical coprecipitation method of ammonium tungstate and $Cs_2CO_3$ in acidic condition. This synthetic method for cesium tungsten bronze is reported for the first time as far as we know. The synthesized $Cs_xWO_3$ as precipitated showed a weak crystallinity of hexagonal unit cell with a crystallite size of about 4 nm without annealing. When the synthesized $Cs_xWO_3$ was annealed in $N_2$ atmosphere, the crystallinity and crystallite size systematically increased maintaining the typical hexagonal tungsten bronze structure as the annealing temperature increased. The analyzed Cs content in the bronze was about 0.3 vs W, which is very close to the theoretical maximum value, 1/3 in cesium tungsten bronze. According to XPS analysis, the reduced tungsten ions existed as both the forms of $W^{5+}$ and $W^{4+}$ and the contents systematically increased as the annealing temperature increased up to $800^{\circ}C$. The $Cs_xWO_3$ thin films on PET substrate were also prepared by a wet-coating method using the ball-milled solution of the annealed $Cs_xWO_3$ nanoparticles at various temperatures. The near-infrared shielding property of these thin films increased systematically as the annealing temperature increased up to $800^{\circ}C$ as expected with the increased contents of reduced tungsten ions.

• Environmental Engineering Research
• /
• 제11권6호
• /
• pp.311-317
• /
• 2006

Feasibility of destroying synthetic and actual leachate containing humic acids and ammonia compounds by supercritical water oxidation (SCWO) was evaluated. In this study, destruction efficiencies of humic acids and ammonia respectively were investigated at various reaction temperatures and residence times under pressure a supercritical pressure (280 atm). To lower reaction temperature, chemical oxidants were used. The experiment was carried out in a cylindrical batch reactor made of Hastelloy C-276 that can withstand high temperature and pressure. Concentrations of humic acids and ammonia were measured using a $COD_{Cr}$ method and an ammonia selective electrode, respectively. The optimal destructive condition of humic acids in the presence of stoichiometric oxygen(air) was 3 min at $380^{\circ}C$, but the temperature could be lowered to subcritical region ($360^{\circ}C$) along with $H_2O_2$ as an oxidant. For ammonia, the optimal destructive condition with air was 5 min at $660^{\circ}C$, but it was possible to operate the process for 3 minutes at $550^{\circ}C$ or 2 min at $600^{\circ}C$ along with $H_2O_2$ as an oxidant. At 2 min and $550^{\circ}C$ along with $H_2O_2$ as an oxidant, humic and ammonia compounds in the actual leachate were easily destructed and the effluent quality met the Korea Standard Leachate Quality.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.383-389
• /
• 2011

본 논문에서는 통계적인 방법을 이용하여 점탄성 제진재인 합성고무의 물성에 대한 변동성을 평가하는 방법을 제안하고 측정데이터를 이용하여 합성고무에 대한 평가를 수행하고 합성고무로 이루어진 고무 마운트에 대한 동특성 해석을 수행하였다. 고무 물성의 불확실성 인자로는 외기 온도의 변화와 실험 데이터의 오차 및 점탄성 물질모델의 오차를 고려하였다. 고무는 분수차 미분모델로 표현되었고, 온도의 영향은 비선형 이동계수모델을 도입하여 복소계수로 나타내어 동강성과 감쇠를 표현하였다. 이러한 물성모델을 바탕으로 고무에 대한 물성 실험데이터와 물성계수의 확률밀도함수 사이에 정의된 우도함수를 최대화하는 통계적 보정방법을 이용하여 물성모델의 물질계수들에 대한 변동성을 추정하였다. 합성고무로 이루어진 제진용 고무 마운트에 대하여 유한요소모델을 이용하여 동특성을 계산하였다. 동특성의 계산시 추정된 물성의 통계값을 적용하고 몬테카를로 해석을 통하여 동강성의 변동성을 살펴서 그 변동성이 매우 큼을 확인하였다.

• 한국결정학회지
• /
• 제8권1호
• /
• pp.15-19
• /
• 1997

고온고압용 autoclave에서 $Na_2CO_3$를 광화제로 하여 청색수정 단결정을 수열성장하고, 성장온도와 코발트 함입량과의 관계를 고찰하였다. $5wt.\%$의 $Na_2CO_3$ 수열용액, $343^{\circ}C$의 성장온도, $22^{\circ}C$의 온도구배, 950기압의 조건에서 $100{\times}50{\times}35mm^3$ 크기의 청색수정을 성장하였으며, 성장속도는 0.55 mm/day였다. 가시영역에서의 흡수 스펙트럼을 측정한 결과 545, 570 및 643 nm 근처에서 흡수피크가 관찰되었다. 청색의 농도는 원료내 코발트의 농도와는 무관하며 성장온도와 밀접한 관계가 있음을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.12-19
• /
• 2013

A gasification process with pre-combustion $CO_2$ capture process, which converts coal into environment-friendly synthetic gas, might be promising option for sustainable energy conversion. In the coal gasification for power generation, coal is converted into $H_2$, CO and $CO_2$. To reduce the cost of $CO_2$ capture and to maximize hydrogen production, the removal of CO and the additional production of hydrogen might be needed. In this study, a 2l/min water gas shift system for a coal gasifier has been studied. To control the concentration of major components such as $H_2$, CO, and $CO_2$, MFCs were used in experimental apparatus. The gas concentration in these experiments was equal with syngas concentration from dry coal gasifiers ($H_2$: 25-35, CO: 60-65, $CO_2$: 5-15 vol%). The operation conditions of the WGS system were $200-400^{\circ}C$, 1-10bar. Steam/Carbon ratios were between 2.0 and 5.0. The commercial catalysts were used in the high temperature shift reactor and the low temperature shift reactor. As steam/carbon ratio increased, the conversion (1-$CO_{out}/CO_{in}$) increased from 93% to 97% at the condition of CO: 65, $H_2$: 30, $CO_2$: 5%. However the conversion decreased with increasing of gas flow and temperature. The gas concentration from LTS was $H_2$: 54.7-60.0, $CO_2$: 38.8-44.9, CO: 0.3-1%.

• 멤브레인
• /
• 제7권2호
• /
• pp.65-74
• /
• 1997

자동차 배출가스로 인한 대기 오염을 줄일 수 있는 자동차 연료용 고순도 에탄올 농축을 의한 투과증발 pilot test가 발효에탄올 시작 공장에서 PVA 복합막을 이용하여 수행되었다. 약 95% 에탄올 농도를 갖는 에탄올/물 공비혼합물을 탈수, 농축하여 99% 이상의 연료용 고순도 에탄올을 얻는 투과증발 공정에서는 막의 내열 온도 범위 내에서 공급액의 가열 온도를 높일수록 농축 성능이 우수하였으며 투과액의 응축 온도는 경제성을 고려하여 결정해야 하며 $0{\circ}C$가 최적임을 알 수 있었다. 발효에탄올 농축을 위한 투과증발 성능은 합성에탄올 농축과 같은 결과를 보임으로써 투과증발 시스템 성능은 에탄올에 포함된 미량의 성분과는 무관한 결과를 보였으며, 투과증발 pilot test 결과 및 에너지 수지 관계를 이용하여 시스템에 소비되는 에너지의 대부분을 차지하는 투과액의 기화에 필요한 에너지는 공급액의 현열에 의해 공급됨을 확인하였다.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.660-665
• /
• 2011

1-D ZnO nanowires have been attractive for their peculiar properties and easy growth at relatively low temperature. The length, diameter, and density of ZnO nanowires were determined by the several synthetic parameters, such as PEI concentration, growth time, temperature, and zinc salt concentration. The ZnO nanowires were grown on the <001> oriented seed layer using the hydrothermal process with zinc nitrate and HMTA (hexamethylenetetramine) and their structure and optical properties were characterized. The morphology, length and diameter of the nanowires were strongly affected by the relative and/or absolute concentration of $Zn^{2+}$ and $OH^{-1}$ and the hydrothermal temperature. When the concentrations of the zinc nitrate HMTA were the same as 0.015 M, the length and diameter of the nanowires were $1.97{\mu}m$ and $0.07{\mu}m$, respectively, and the aspect ratio was 28.1 with the preferred orientation along the <001> direction. XRD and TEM results showed a high crystallinity of the ZnO nanowires. Optical measurement revealed that ZnO nanowires emitted intensive stimulated UV at 376 nm without showing visible emission related to oxygen defects.

• Nano
• /
• 제13권12호
• /
• pp.1850147.1-1850147.14
• /
• 2018

In this work, water-soluble and blue-emitting carbon nanodots (CDs) were synthesized from apple peels for the first time via one-step hydrothermal method. The synthetic route is facile, green, economical and viable. The as-prepared CDs were characterized thoroughly by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman, Fourier transform infrared (FT-IR), X-ray photoelectron (XPS), fluorescence and UV-Vis absorption spectroscopy in terms of their morphology, surface functional groups and optical properties. The results show that these CDs possessed ultrasmall size, good dispersivity, and high tolerance to pH, ionic strength and continuous UV irradiation. Significantly, the CDs had fast and reversible response towards temperature, and the accurate linear relationship between fluorescence intensity and temperature was used to design a novel nanothermometer in a broad temperature range from 5 to $65^{\circ}C$ facilely. In addition, the fluorescence intensity of CDs was observed to be quenched immediately by Cr(VI) ions based on the inner filter effect. A low-cost Cr(VI) ions sensor was proposed employing CDs as fluorescent probe, and it displayed a wide linear range from 0.5 to $200{\mu}M$ with a detection limit of $0.73{\mu}M$. The practicability of the developed Cr(VI) sensor for real water sample assay was also validated with satisfactory recoveries.

• 지질공학
• /
• 제33권2호
• /
• pp.275-291
• /
• 2023

지구온난화로 인해 극지방에 대한 접근성이 높아짐에 따라 석유자원이 풍부한 영구동토 지역에서 자원개발 플랜트 건설의 수요가 증가하고 있다. 동토 지역에서의 자원개발 플랜트 건설 입지는 동토 활성층의 융해와 동결에 기인하는 지표변위가 필수적으로 고려되어야 한다. 그러나 동토의 변위를 고려하여 자원개발 플랜트 건설의 입지를 선정한 연구 사례는 거의 없다. 이 연구에서는 캐나다 앨버타 주의 Athabasca 남부 지역에서 최적의 오일샌드 개발 플랜트 건설 입지를 선정하기 위해 지표변위를 비롯한 다양한 공간정보를 활용하여 계층화 분석(Analytical Hierarchy Process)을 수행하였고, 동토 지역에서의 자원개발 플랜트 건설 활동에 있어 지표변위의 중요성을 논의하였다. 2007년 2월부터 2011년 3월까지 획득된 시계열 ALOS PALSAR 영상에 Small BAseline Subset-Interferometric Synthetic Aperture Radar 기법을 적용하여 지표변위 속도 정보를 구축하였고, ERA5 재분석 자료로부터 2000~2010년 기간에 대한 평균 기온, 지표온도, 지중온도 정보를 구축하였다. 도로 및 철도와 토지피복 공간정보는 각각 캐나다 연방 통계청과 북미환경협력위원회에서 제공하는 자료를 구축하여 활용하였다. 토지피복, 지표변위, 도로 접근성을 가장 중요한 공간정보로 설정하여 수행한 최적 입지 분석 결과는 2010년 이후 건설된 오일샌드 플랜트 건설지와 비교하여 그 타당성이 확인되었고, 입지 적합도 평가에 대한 지표변위의 민감도는 매우 높은 것으로 분석되었다. 이 연구를 통하여 동토 지역에서 최적의 자원개발 플랜트 건설지를 선정하는데 지표변위가 필수적으로 고려되어야 함이 확인되었다.