• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2006

We report on the growth, structural and transport properties of zinc-blende CrAs/GaAs/MnAs/GaAs multilayers on GaAs(001) substrates. Structural analyses using in-situ reflection high-energy electron diffraction and exsitu cross-sectional transmission electron microscopy confirmed the realization of a zinc-blende crystal structure. Room temperature Hall measurements reveal that the as-grown multilayer exhibits p-type conductivity with a very low resistivity of $0.052\;\omega{cm}$, a high carrier concentration of $6.2X10^{19}\;cm^{-3}$ and a Hall mobility of $1.8\;cm^2/Vs$. We also observed a clear decrease of the resistivity in samples after low temperature annealing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.179-183
• /
• 2005

In apply roof waterproof system using of synthetic high polymer sheet for rooftop measure physical performance (tension$\cdot$tearing ability, temperature relativity, heating stretch performance, junction performance, wind resistance test) by various test environment condition waterproof test of structure and performance of construction work aspect, present suitable form of construction work under these environment. Also, wish to improve durability of concrete structure as that examine in priority about adhesion method and joint junction method with waterproof out surface, and present new direction about roof system application of waterproofing method for rooftop.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1349-1351
• /
• 2003

In this paper, theoretical channels model of Synthetic Aperture Radiometer is presented. Based on this model, how amplitude imbalance, phase imbalance and mutual coupling between the different channels effect brightness temperature image retrieving is analyzed. The computer simulation results are also presented to find out the cause of the along-track streaks usually appeared in the retrieved brightness temperature image. In addition, a new system calibration approach is introduced to solve this problem.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.395-402
• /
• 2004

We need to develop technology of identifying high temperature high pressure(HTHP) synthetic diamond and HTHP treated natural diamonds from untreated natural diamonds to cope with sophisticated diamond enhancing technology. We had successfully identified synthetic diamonds using a vibrating sample magnetometer due to their ferromagnetic property. In addition, we identified the HTHP enhanced TypeIa, TypeIIa diamonds by employing non-destructive Fourier Transform Infrared(FTIR) spectroscopy.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.293-298
• /
• 1998

Allithiamine was synthesized when thiamine was mixed with fresh garlic extract made with ethanol at a alkali medium. Allithiamine was isolated and purified using solvents such as ethyl acetate, diethyl ether and benzene. Purified allithiamine was identified by determination of melting point, elemental analyzer and LC/Thermospray/Mass-spectrometer. On the other hand, synthetic conditions of allithiamine from fresh garlic, pH, temperature and ratio of garlic to ethanol were investigated. Synthetic rates of allithiamine under alkali conditions were rapidly increased while those under acidic conditions very slowly increased. The synthetic rates of allithiamine increased as temperature increased, but decreased above $70^{\circ}C$ as reaction time increased. There was no significant difference in synthetic rate of allithiamine when garlic was mixed above 4 times of ethanol. Therefore, optimum condition of pH, temperature and ratio of garlic to ethanol for synthesis of allithiamine were 8, $60^{\circ}C$ and 1 : 4, respectively.

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.572-575
• /
• 2007

The angiontensin converting enzyme (ACE) inhibitory peptides were separated from beef sarcoplasmic protein extract and their amino acid sequences were identified as GFHI, DFHINQ, FHG, and GLSDGEWQ. The 4 peptides were synthesized in a laboratory and the ACE inhibitory activities of pep tides was measured after 2 months of storage at $4^{\circ}C$ under different pH conditions (6.0, 6.5, 7.0, 7.5, and 8.0) and the exposure of different temperatures (70, 80, 90, and $100^{\circ}C$) for 20 min to evaluate industrial use. No significant difference was detected by pH and temperature abuse for 20 min during storage. When the synthetic peptides were digested by pepsin, trypsin, and chymotrypsin, the ACE inhibitory activity was not changed. These results indicated that the 4 synthetic peptides with ACE inhibitory activity were pH-stable, heat-stable, and resistant to proteinases in gastro-intestinal tracts. Therefore, those 4 peptides can be used as a source for functional food product with various applications.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.4
• /
• pp.63-70
• /
• 1997

The objectives of this study were to find out the optimum treatment conditions for removing nitrogen in a synthetic wastewater by using microorganisms immobilized with PVA-Freezing method. The samples used as influents to the laboratory scale treatment units were a synthetic wastewater. The experiments in this study were mainly directed to collect the data of nitrogen and organic matter removal efficiencies for the different hydraulic and internal recycle rates conditions, temperature and influent C/N ratios. The removal efficiencies of nitrogen and organic matters were investigated for the operating conditions of HRT 2~12hours, internal recycle rates 50~400%, temperatures $15{\sim}30^{\circ}C$ and C/N ratios 2.5~7.5. The adequate internal recycle rate for removing T-N and $BOD_5$ in the synthetic wastewater was found to be about 300% at the temperature of $30^{\circ}C$ when the ratio of carbon contents to the nitrogen (C/N) in the influent was around 5.5. Under these conditions, the final effluent concentrations of T-N and $BOD_5$ were 8.7 and 8.4 mg/l, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1201-1204
• /
• 2004

This paper suggests a DCS (Distributed Control System) model for steam temperature system of the thermal power plant. The model calculated within sectional range is linear. In order to calculate mathematical models, the system is partitioned into two or three sectors according to its thermal conditions, that is, saturated water/steam and superheating state. It is divided into three sections; water supply, steam generation and steam heating loop. The steam heating loop is called 'superheater' or steam temperature system. Water spray supply is the control input. A first order linear model is extracted. For linear approach, sectional linearization is achieved. Modeling methodology is a decomposition-synthetic technique. Superheater is composed of several tube-blocks. For this block, linear input-output model is to be calculated. Each tiny model has its transfer function. By expanding these block models to total system, synthetic DCS linear models are derived. Control instrument include/exclude models are also considered. The resultant models include thermal combustion conditions, and applicable to practical plant engineering field.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.81-88
• /
• 2014

Synthetic products such as casting tape and splints are rapidly replacing conventional plaster casts to treat orthopedic patients. Most synthetic products are produced through a polymerization process with related chemical agents. In this study, the effect of the process parameters on the residual NCO content within a prepolymer for casting tape and the hardening temperature for casting tape were experimentally evaluated. In order to verify the effects of the process parameters, an experimental method was adopted. From an S/N ratio analysis, optimal parameter combinations were determined to produce a pre-polymer with a suitable residual NCO content and alower hardening temperature. Prediction models for the NCO content and the hardening temperature were developed and confirmed.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.27-44
• /
• 1994

The purpose of this study was to determine the effects of pH, temperature and time on the synthesis of hydroxyapatite(HAP) by spontaneous precipitation under relatively physiologic condition. Specimens were obtained from aqueous system with various pH, temperature and experimental time. Chemical composition, crystallographic structure and crystallinity of the synthetic HAP were evaluated by Infrared spectroscopy and powdered X-ray diffraction method. The following results were obtained. 1. No precipitate was obtained under pH 5.5. 2. All the specimens were concluded as HAP except one that was obtained under the condition of pH 6.5, $25^{\circ}C$ and 1 day. It was concluded as dicalcium phosphate dihydrate(DCPD). 3. The crystallinity of HAP was enhanced by increases in pH, temperature and time of the preparation. But, the crystallinity of the synthetic HAP was lower than that of the mineral HAP. 4. Intermediates such as DCPD and octacalcium phosphate were formed on the process of the synthesis of HAP.