• 핵의학기술
• /
• 제13권3호
• /
• pp.147-151
• /
• 2009

Purpose: 2-[$^{18}F$]Fluoro-2-deoxy-D-glucose ([$^{18}F$]FDG) particularly plays as a important role in Positron Emission Tomography (PET) imaging in nuclear medicine. Domestic [$^{18}F$]FDG auto synthesizers are installed in Seoul National University Bundang Hospital (SNUBH) at June 2008, these modules were known that it's synthetic yields were guaranteed in average $45{\pm}5%$ so far. To improve yields and convenience of domestic [$^{18}F$]FDG auto synthesizer, numerous trials in reaction time, base concentration, pressure and temperature were performed to increase [$^{18}F$]FDG yields. Materials and Methods: Several synthetic factors (temperature, time and pressure) and shortcoming were corrected based on many evaporation test. Syringe dispensing of tetra-butylammonium bicarbonate (TBAB) was replaced with micro pipette to prepare tetrabutyl ammonium fluoride salt ([$^{18}F$]TBAF). Troublesome refill of liquid nitrogen every 2 hours which was used to protect vacuum system was changed to charcoal cartridge, base guard filter. To monitor the volume of delivered $[^{18}O]OH_2$ from cyclotron by surveillance camera, we set up the volumetric vial on the cover of the module. In addition to, the recovery vial was added in [$^{18}F$]FDG production system to recover [$^{18}F$]FDG loss due to the leak of valve ($V_{13,14}$) in [$^{18}F$]FDG purification process. Results: When we used micro pipette for adding TBAB ($30\;{\mu}L$ in 12% $H_2O$ in acetonitrile), this quantitative dispensation has enabled to improve $5.5{\pm}1.7%$ residual fluorine-18 activity in fluorine separation cartridge compared to syringe adding. Besides, the synthetic yields of [$^{18}F$]FDG has increased $58{\pm}2.6%$ (n=19), $58{\pm}2.9%$ (n=14), $60%{\pm}2.5%$ (n=17) for 3 months. The life cycle of charcoal cartridge and base vacuum was 3 months prior to filling liquid nitrogen every 2 hours and additional side separator can prevent pump corrosion by organic solvent. After setting of volumetric indicator vial, the operator can easily monitor the total volume of irradiated $[^{18}O]OH_2$ from cyclotron. The recovery vial can be used for the stabilizer when an irregular [$^{18}F$]FDG loss was generated by the leak of valves ($V_{13,14}$). Conclusions: We has optimized appropriate synthetic conditions (temperature, time, pressure) in domestic [$^{18}F$]FDG auto synthesizer. In addition to, the remodeling with several accessories improve yields of domestic [$^{18}F$]FDG auto synthesizer with reliable reproducibility.

• 방재기술
• /
• 통권15호
• /
• pp.11-21
• /
• 1993

This report is announced about thermal lag of painted heat detectors. Thermal lag is forecast result from painting the part of heat receiving. Test is simulated that heat detector is painted by synthetic resin emulsion paint according to the cricumstance of installation, corrosion, temperature, dust.

• 약학회지
• /
• 제36권6호
• /
• pp.538-547
• /
• 1992

Optimal synthetic condition of barium sulfate were investigated from the viewpoint of yield and bulkiness according to a randomized complete block design proposed by G.E.P. Box and K.B. Wilson. Barium chloride and magnesium sulfate were utilized as reactants in order to prepare barium sulfate in this study. It was found that optimum temperature range of reactant solutions was $60{\sim}100^{\circ}C$ and the optimum concentration range of the reactant solutions was $10{\sim}17.3%$ and $10{\sim}20%$ respectively, on the viewpoint of yield and bulkiness. The optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum reacting time range was $15{\sim}20$ minutes. The optimum drying temperature range was $110{\sim}130^{\circ}C$ from the viewpoint of yield, but it was $90{\sim}110^{\circ}C$ on the basis of bulkiness. Apparent viscosity of barium sulfate suspensions dispersed in various concentrations of Na. CMC was measured by using Brookfield synchrolectric viscometer model LVT, the relative equation, log ${\eta}_{sp}=A+B.{\phi}$ was examined and the equation was found to agree fairly well. 1 w/v% Na. CMC aqueous solution and 0.1 volume fraction of $BaSO_4$ powder were optimum in the preparation of $BaSO_4$ suspension showing highest viscosity at infinite shearing.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.142-149
• /
• 2012

The reduction characteristics of $NO_2$ to NO are experimentally studied over a platinum-based catalyst, especially at lower temperatures below about $200^{\circ}C$. In the present work, two types of steady-state experiments, engine bench and synthetic gas bench tests, are carried out in sequence. Steady-state engine bench tests with the DOC mounted on a light duty 4-cylinder 2.0 liter turbocharged diesel engine are performed and prove that CO plays a major role in $NO_2$ abatement at temperatures below the light-off temperature of CO oxidation, about $200^{\circ}C$. Synthetic gas bench tests are then performed using synthetic gas mixtures with CO, $C_3H_6$, NO, $NO_2$, $O_2$, $H_2O$ and $N_2$ in the $140{\sim}450^{\circ}C$ T-range and show that both CO and $C_3H_6$ are capable of reducing $NO_2$. It is noted that the reaction rate of $NO_2$ with $C_3H_6$ is much higher than that with CO. At temperatures below about $200^{\circ}C$, the reduction of $NO_2$ to NO is promoted with increasing CO concentration and $NO_2$/$NO_X$ ratio and with decreasing $O_2$ concentration, as well as with the presence of $H_2O$.

• 한국광물학회지
• /
• 제27권4호
• /
• pp.283-291
• /
• 2014

층상규산염광물 중 하나인 활석($Mg_3Si_4O_{10}(OH)_2$)은 경도가 매우 낮고, 산업분야에서 매우 다양하게 이용되는 재료물질이다. 실험에 이용한 활석은 외부가열열수고압기기를 이용하여 압력 200 MPa, 온도 $600^{\circ}C$인 조건하에서 합성한 분말시료이다. 포항가속기연구소에서 대칭다이아몬드 앤빌 기기와 방사광 및 각분산 X-선회절방법을 이용하여 상온에서 11.06 GPa까지 압축실험을 시행하였다. 본 실험의 압력 범위 내에서 상변이는 관찰하지 못하였다. 체적탄성률은 버치-머내한 상태방정식을 이용하여 72.4 GPa로 결정되었으며, 이 값은 천연산활석에 비해 낮은 것으로 나타났다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.897-902
• /
• 1995

경북 감포지역에서 산출되는 천연 벤토나이트를 이용하여 제올라이트 A를 합성하기 위해 반응기질의 몰비, 반응온도, 반응시간 등에 따른 최적의 합성조건을 조사하였다. 실리카원은 40%-황산용액으로 처리한 천연 벤토나이트를 사용하였고, 알루미늄원은 NaA1O₂를 합성하여 사용하였다. 반응기질의 몰비는 SiO₂ : A1₂O₃ : NaO₂ : H₂O=2 : 1 : 1 : 25와 2 : 1 : 1 : 30이었고, 60℃에서 1시간 묵힘과정을 거친 후 90, 100, 120℃에서 1, 3, 5hr반응시켰다 제올라이트 A의 최적의 합성조건은 SiO₂: Al₂O₃ : Na₂O = H₂O=2 : 1 : 1 : 30이고, 90℃에서 3hr 반응시키는 경우였고, 이 조건에서 합성된 제올라이트의 열적 성질은 79.2℃에서 층간수가 증발하였고, 503.0℃에서 결정수가 탈리되었다. 수분의 감소량은 제올라이트 중량비의 5.9%이었다.

• 항공우주시스템공학회지
• /
• 제13권2호
• /
• pp.66-72
• /
• 2019

SAR(Synthetic Aperture Radar) 관측위성과 같이 고 발열 임무장비가 다수 적용되는 경우 전장품의 발열을 효과적으로 우주공간으로 방출하기 위한 방열판의 적용이 요구된다. 그러나 위성의 식 구간에서 임무장비의 비작동 시, 방열판을 통해 지속적인 방열이 이루어짐에 따라 장비의 최소허용 온도유지를 위한 히터 적용이 불가피하게 된다. 본 연구에서는 기존 방열판에 비해 보다 효율적인 열제어를 위하여 높은 전도율의 액체금속을 이용한 우주용 가변 전도율 방열판을 제안하였다. 제안된 방열판은 탑재장비의 온도조건에 따라 두 개의 저장소 사이에서 기계식 펌프로 액체금속을 이동함으로서 열전도 특성을 가변하는 원리이다. 따라서 저온 조건에서는 방열판으로의 열전도를 차단하여 임무장비에 대한 히터 전력소모를 최소화하고, 반대로 고온 조건에서는 기존 방열판과 같이 효과적인 방열이 가능하도록 한다. 본 연구에서는 제안한 가변 전도율 방열판의 실현 가능성 입증을 위한 열해석을 실시하여 기존의 전도율이 고정된 방열판과 열적 성능을 비교 분석하였다.

• Advances in nano research
• /
• 제1권4호
• /
• pp.219-228
• /
• 2013

We report on the preparation of iron pyrite ($FeS_2$) using pulsed electron ablation of two targets, namely, a mixture of sulfur and iron compound target, and a natural iron pyrite target. Thin films of around 50 nm in thickness have been deposited on glass substrates under Argon background gas at 3 mTorr, and at a substrate temperature of up to $450^{\circ}C$. The thin films have been analyzed chemically and examined structurally using x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and visible Raman spectroscopy. The morphology and thickness of the films have been assessed using scanning electron microscopy (SEM) and visible spectroscopic reflectance. The preliminary findings, using a synthetic target, show the presence of iron pyrite with increasing proportion as substrate temperature is increased from $150^{\circ}C$ to $250^{\circ}C$. The data have not shown any evidence of pyrite in the deposited films from a natural target.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.457-464
• /
• 1991

Aluminum nitride (AlN) has excellent properties such as high thermal conductivity and electrical resistivity, whereas it has some disadvantages such as low sinterability and tendency to be hydrolyzed by moisture at room temperature. In the present work, the relative density, modulus of rupture and microhardness were examined for pressure-less-sintered AlN (synthetic and commercial) bodies which were prepared under the conditions of various sintering temperatures, holding times and additions of CaCO3 which showed the best effect on sinterability among the various sintering aids. As a result, the AlN bodies with 1.0 wt% CaCO3 (0.56wt% CaO) which were sintered at 1800$^{\circ}C$ for 20 min showed good densification. In this case, the relative densities were 95.9% and 95.2%, and microhardnesses were 10.3 GPa and 9.8 GPa for synthetic and commercial AlN respectively. And as the holding time at 1800$^{\circ}C$ was increased from 10 min to 60 min, the relative density was increased from 91.9% to 96.5%. It was considered that impurities of metals and oxygen promoted the densification of AlN at low temperature (1600$^{\circ}C$).

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.9-15
• /
• 2013

지구 온난화 현상과 유가급등에 따른 에너지 부족 현상은 생산된 에너지의 효율적인 사용과 관리 문제를 부각시켰다. 이에 열교환기의 에너지 효율 향상을 위한 새로운 방안이 요구되었고 새로운 작동유체로서 나노유체의 열전달 특성 연구가 필요한 실정이다. 나노유체의 전도열전달특성의 경우 많은 선행연구에서 예측 가능한 패턴을 보이며 증가한 반면, 대류열전달 특성의 경우 특성이 명확하지 않아 추가적인 연구가 필요한 실정이다. 본 연구에서는 $25^{\circ}C$, $50^{\circ}C$의 입구온도 조건에서 레이놀즈수와 나노유체의 vol%를 증가시키며 실험을 수행하였다. 수행 결과 레이놀즈수와 vol%, 입구 온도가 증가할수록 대류열전달계수가 향상되었다.