• 한국의류학회지
• /
• 제3권1호
• /
• pp.49-56
• /
• 1979

To investigate detergency of various woven fabrics in relation to the detergents and washing temperature. cotton, polyester/cotton (p/c), nylon, acetate, and polyester were soiled in aqueous artificial ($carbon-CCl_4$) soil. Each fabric was washed with soap, alkaline and neutral synthetic detergents at $30^{\circ}C$, $40^{\circ}C$ and $60^{\circ}C$ respectively. The results obtained may be summerized as follows; 1. In soap, ascension of temperature had the most important effect upon washing efficiency and the higher the temperature was, the higher the washing efficiency was showed in all fabrics. And in case of alkaline synthetic detergent, nylon and p/c fabrics were much more difficult to clean at higher temperature and also acetate and polyester had the best efficiency at $40^{\circ}C$. Detergency of neutral detergent was good but the effect of temperature in neutral detergent was less than in soap. 2. Washing efficiency of cotton was less than that of others. 3. The higher the temperature was, the higher the washing efficiency of cotton in all detergents, and the best was in soap. In p/c, detergency of neutral detergent was good but effect of ascension of temperature was lower than in soap. In nylon, washing efficiencies of alkaline synthetic detergent and neutral detergent were excellent at 30°C but detergency of soap at $60^{\circ}C$ was best. In case of acetate, detergency of all detergents was about the same at $30^{\circ}C$ but that of soap at $60^{\circ}C$ was best. In polyester at $30^{\circ}C$, efficiency of neutral detergent was excellent but that of soap was more excellent at higher temperature and the best detergency of alkaline synthetic detergent showed at $40^{\circ}C$. In general. the higher the temperature is, the higher the washing efficiency of soap is. But when synthetic fibers of nylon and polyester are washed with synthetic detergents, washing at lower temperature is advisable.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.105-106
• /
• 2007

M-DNAs based on zinc and cobalt ions were formed at the conditions of $26^{\circ}C$, 76% humidity, atmosphere, and pH 8.0. Some process parameters in synthesis of M-DNA such as synthetic temperature, concentration of metal ions, and synthetic time were varied and the electrical properties were investigated by changes of the parameters. The electrical properties of M-DNA showed the dependences on synthetic temperature, concentration of metal ions and synthetic time. The I-V characteristics rapidly increased with each increase of the parameters.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.347-348
• /
• 2002

The numbers of synthetic greases have been developed with synthetic oils because of their excellent performance factors including thermal/oxidation stability, low-temperature fluidity and plastic compatibility. Long life under high-temperature condition and excellent low-temperature fluidity are required to serve as grease for bearings of engine room electrical component. As many plastics are used in place of metals for the purpose of weight saving, synthetic hydrocarbon grease is in use to avoid adverse effect on plastics. Other various special synthetic greases are also in use depending on specific requirements like conductivity and vacuum condition.

• 약학회지
• /
• 제47권1호
• /
• pp.5-9
• /
• 2003

Synthetic aluminum silicate was prepared by reacting aluminum sulfate solution with Sodium silicate solution in this study. The optimum synthesis conditions based on the yield of the product were established by applying Box-Wilson experimental design. The results were found to be as follows; Reactant temperature : 50∼72$^{\circ}C$, Concentration of two reactants : 10∼17.6％, Mole ratio of two reactants, [Sod. silicate]/[Al. sulfate) : 4.6∼5.0, Temperature of washing water : 25∼4$0^{\circ}C$, and Drying temperature of product : 50∼$65^{\circ}C$. The physical and chemical properties of synthetic aluminum silicate as medicine were investigated by means of chemical analysis, adsorption test and acid consuming capacity measurements.

• 한국분무공학회지
• /
• 제28권3호
• /
• pp.143-149
• /
• 2023

Amidst the drive towards carbon neutrality, interest in renewable synthetic e-fuels is rising rapidly. These fuels, generated through the synthesis of atmospheric carbon and green hydrogen, offer a sustainable solution, showing advantages like high energy density and compatibility with existing infrastructure. The physical properties of e-fuels can be different from those of conventional gasoline based on manufacturing methods, which requires investigations into how the physical properties of e-fuels affect the fuel injection characteristics. This study performs a comparative analysis between conventional and Fischer-Tropsch (F-T) synthetic gasoline (e-gasoline) across various fuel temperatures, including the cold start condition. The fuel properties of F-T synthetic and conventional gasoline are analyzed using a gas chromatography-mass spectrometry technique and the injection rates are measured using a Bosch-tube injection rate meter. The F-T synthetic gasoline exhibited higher density and kinematic viscosity, but lower vapor pressure compared to the conventional gasoline. Both fuels showed an increase in injection rate as the fuel temperature decreased. The F-T synthetic gasoline showed higher injection rates compared to conventional gasoline regardless of the fuel temperature.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.56-62
• /
• 2008

A synthetic gas reformed from hydrocarbon-based fuels consists of $H_2$, CO and $N_2$. Hydrogen contained in the synthetic gas is a very useful species in chemical processes, due to its wide flammability range and fast burning speed. The ESGI (Exhaust Synthetic Gas Injection) technology is developed to shorten the light-off time of three way catalysts through combustion of the synthetic gas in the exhaust manifold during the cold start period of SI engines. Before the ESGI technology is applied to the test engine, the authors set a test rig that consists of gas temperature and composition controllers, an exhaust pulse generator and an exhaust manifold with a visualization window, in order to optimize the point and conditions of injection of the synthetic gas. Through measuring burned gas temperatures and taking photographs of synthetic gas combustion at the outlet of the exhaust manifold, the authors tried to find the optimal injection point and conditions. Analysis of burned gas composition has been performed for various $O_2$ concentrations. As a result, when the synthetic gas is injected at the port outlet of the cylinder No. 4 and $O_2$ concentration exceeds 4%, combustion of the synthetic gas is strong and effective in the exhaust manifold.

• 수산해양교육연구
• /
• 제26권6호
• /
• pp.1435-1441
• /
• 2014

The fire took place in the synthetic heat transfer fluid boiler used in production process of medium density fiberboard. This study investigated pressure distribution of the first, second and third passes and the temperature in the fire burner. The boiler's internal fluid is unsteady due to the out of order inverter. As the operation continues, the flame's flow and speed are unsteady. The synthetic heat transfer fluid leak spouted about 120kg/min in the form of vapor in the early period of the fire. The flame extended to the second and third passes. The highest temperature of the second and third pass is $1059^{\circ}C$ and $1007^{\circ}C$, respectively. The synthetic heat transfer fluid spouted through the cracked part of the fire box in the first pass and accumulated on the turn table. Therefore, it is expected that the temperature of the interior of the fire box is above $1200^{\circ}C$. The temperature of the burner rises to a maximum level several times in a short period. On account of that, several explosions occur in the fire burner. Pressure distribution at steady state in combustion furnace is 2~5mAq and pressure distribution at inverter under fault condition in combustion furnace is 10~-53mAq. The decrement of coil thickness measurement for synthetic heat transfer fluid boiler is 0~5mm.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.78-88
• /
• 1994

For the study of chemical and mechanical properties of the synthetic and mineral oil added with two different Zn-DTPs, base and formulated oils were analyzed and compared. Kinematic viscosity and total acid number (TAN) were tested at high temperature for formulated oils. Also the oils added with different alkyl groups of Zn-DTP were tested for thermal stability and TAN changes. The 4-ball machine was used to test for the mechanical properties, such as the coefficient of friction and wear. The worn areas after sliding test were analyzed with microscope and EDX, too. From the study, mineral and synthetic oil have different effects according to the various added ratio of the primary and secondary alkyl groups of Zn-DTP. Also the temperature of test oil affected the anti-wear and friction property of the formulated oils. For synthetic oil, the primery alkyl group of Zn-DTP made better friction properties than that of secondary, while, for mineral oil, secondary alkyt group was better only at low temperature for mineral oil.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3352-3357
• /
• 2012

본 논문은 열매체(Synthetic Heat Transfer Fluid) 보일러의 화재원인을 분석하기 위하여 3차원 자동설계 프로그램인 CATIA를 활용하여 설계하였다. 또한 3차원 유한요소 코드인 ANSYS를 활용하여 설계된 열매체보일러에 대하여 구조해석을 실시하였다. 구조해석을 통하여 열매체보일러의 정상상태와 화재 후의 최대온도(maximum temperature), 최대응력(maximum stress), 최대변형율(maximum strain) 등을 구하였다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.51-62
• /
• 2008

The purpose of this study was to check color change depending on dyeing conditions when silk fabrics was dyed with gromwell and to investigate mordant effect when synthetic tannin was used as a mordant. First, when silk fabrics were dyed with gromwell, the change of color, brightness and chroma were examined by measuring K/S value, a, b value, L value and C value depending on dyeing condition. Second, color, brightness and chroma differences which appeared after mordanting with synthetic tannin were investigated and muti-functional mordanting effect was confirmed with dyeing fastness, antibiosis. As a result of color analysis of gromwell, it was proved that the main pigment of gromwell was shikonin. Color was red purple at pH 3 when silk fabrics were dyed with gromwell. But It became greenish and bluish as temperature rose and time passed by. And it grew reddish and yellowish as concentration level reached higher. The color became purple at pH 5 and purple blue at pH 7. Both at pH 5 and pH 7, it became greenish and yellowish, as temperature went up and time ran by. And it became reddish with concentration increasing. Brightness and chroma decreased with temperature and concentration increasing as well as time passing by. After mordanting with synthetic tannin, the color became less reddish at pH 3 and reddish-yellowish at pH 5 and pH 7. The brightness increased and the chroma decreased. At all pH, the color, the brightness and the chroma became similarly by synthetic tannin mordanting. Dyeing fastness of synthetic tannin mordanted fabric was higher than that of non-mordanted fabric. Especially, wet fastness at pH 3 improved from 1 grade before synthetic tannin mordanting to $3{\sim}4$ grade after tannin mordanting. Antibiosis was improved by gromwell dyeing and synthetic tannin mordanting.