• 한국세라믹학회지
• /
• 제30권4호
• /
• pp.325-331
• /
• 1993

Aqueous solutions of metallic salts, ZrO(NO3)2.2H2O and Y(NO3)3.5H2O were used as raw materials to synthesize crystalline submicron spherical powders of Zr0.94Y0.06O1.97 with tetragonal crystal phase. Each aqueous solution was mixed on the magnetic stirrer to homogenize for 12 hours. The concentration of the mixed solutionwas changed from 0.01mol/$\ell$ to 0.1mol/$\ell$ calculated as the concentration of Zr0.94Y0.06O1.97. Ultrafine droplets of starting mixed solution were sprayed by the ultrasonic vibrator and carried into the furnace kept at 55$0^{\circ}C$, $650^{\circ}C$, 75$0^{\circ}C$ and 85$0^{\circ}C$ using carrier gas of air (10$\ell$/min) and pyrolysed to form Y-TZP fine powders. The results of this exeriment were as follows. 1) Synthesized powders were nonagglomerated and spherical type. 2) Particle size distribution was narrow between 0.1${\mu}{\textrm}{m}$ and 1${\mu}{\textrm}{m}$. 3) Forming reaction Y-TZP was finished above synthetic temperature 75$0^{\circ}C$. 4) As the synthetic temperature rised from 55$0^{\circ}C$ to 85$0^{\circ}C$, the mean particle size decreased from 0.35${\mu}{\textrm}{m}$ to 0.22${\mu}{\textrm}{m}$ in the concentration of starting solution with 0.02mol/$\ell$. 5) At 75$0^{\circ}C$ of synthetic temperature, the concentration changes of starting solution from 0.01mol/$\ell$ to 0.1mol/$\ell$ increased the mean particle size from 0.24${\mu}{\textrm}{m}$ to 0.38${\mu}{\textrm}{m}$. 6) Chemical compositions of each synthesized particle were homogeneous nearly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.1000-1009
• /
• 2004

The environment friendly calcareous deposit films were formed on steel plates by electrodeposition technique in natural seawater and synthetic solutions such as dissolved $\textrm{Mg}^{2+}$ and $\textrm{Ca}^{2+}$ ions at various potential conditions. The influence of potential conditions on composition ratio, structure and morphology of the electrodeposited films were investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractor (XRD). Accordingly, this study was provided a better understanding of the composition between the growth of $\textrm{Mg(OH)}_2$ and that of $\textrm{CaCO}_3$ during the formation of calcareous deposit films on steel substrate under cathodically electrodeposition in synthetic and natural seawater. The results showed that the formation of good overall calcareous deposited film in seawater can be achieved by controlling the Ca/Mg ratio according to interfacial pH with the effective use of the electro deposition technique.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.258-267
• /
• 2019

Synthetic suede without PFCs(perfluorinated compounds) are followed by subsequent high temperature treatment. But migration fastness of synthetic suede may be reduced due to sublimation of disperse dyes that results from the high temperature treatment. Therefore, in this study, chitosan treatment was used to improve the migration fastness before polyurethane dipping process. Polyester fiber was treated with sodium hydroxide aqueous solution before chitosan processing. This samples treated with a chitosan concentration upto 0.5% were dyed and coated with PUD(polyurethane dispersion). The migration fastness was most improved at 0.35% application. This is presumably due to the fact that the chitosan may increase the dye-binding capability through intermolecular hydrogen bonding.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.164-165
• /
• 2015

보일러 및 압력 용기용 강판으로 사용되는 SB410은 고 항복 강도 및 좋은 용접성의 특성을 가진 재질로서 주로 고압력, 내열성 및 내식성이 필요한 석유플랜트, 액화물 저장 탱크, 화력 발전 보일러 등의 제조에 주로 사용되어지는 탄소 강재이다. 그러나, 최근에는 조선소, 해양 플랜트, 석유화학 플랜트 등 사용환경에 따른 관련 분야에서의 내식성 요구치가 높아지고 있다. 이와 관련하여 현재 보편적으로 사용되어지는 Marin paint coating을 적용한 SB410 강재의 경우에도 사용환경의 가혹화가 증가됨에 따라 요구되는 내식성에 비하여 불량 현상이 증가하는 추세이며 해당 분야에서 본 재질의 표면처리 개선에 대한 연구 개발이 진행되고 있다. 본 연구에서는 Teflon(PTFE) synthetic coating solution을 이용한 SB410 소재 상의 표면처리 공정 최적화를 수행하였으며, 상기 표면처리에 대한 내식성을 검토하기 위하여 Marin paint coating sample, Teflon(PTFE) synthetic coating sample들에 대한 갈바닉 부식 분석 비교를 통하여 내식성에 대한 비교 검증을 수행하였다.

• Corrosion Science and Technology
• /
• 제10권4호
• /
• pp.125-130
• /
• 2011

This study was performed to improve the corrosion resistance and the stability of passive film on copper tube by potentiostatic polarization method in synthetic tap water. Formation of passive film was carried out by anodic potentiostatic polarization at various passivation potentials and passivation times in 0.1 M NaOH solution. Stability of passive film and corrosion resistance was evaluated by self-activation time, ${\tau}_0$ from passive state to active state on open-circuit state in 0.1 M NaOH solution. Addition of polyphosphate in NaOH solution prolonged the self-activation time and improved the corrosion resistance, and the addition of 5 ppm polyphosphate was most effective. It was also observed that better corrosion resistance was obtained by potentiostatic polarization at 1.0 V (vs. SCE) than at any other passivation potentials. Passivated copper tube showed perfect corrosion resistance for the immersion test in synthetic tap water showing that the anodic potentiostatic polarization treatment in 0.1 M NaOH with 5 ppm polyphosphate solution would be effective in improving the corrosion resistance and preventing the blue water problem.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.385-392
• /
• 2023

A solution combustion process for the synthesis of hollandite (BaAl₂Ti₆O₁₆) powders is described. SYNROC (synthetic rock) consists of four main titanate phases: perovskite, zirconolite, hollandite and rutile. Hollandite is one of the crystalline host matrices used for the disposal of high-level radioactive wastes because it immobilizes Sr and Lns elements by forming solid solutions. The solution combustion synthesis, which is a self-sustaining oxi-reduction reaction between a nitrate and organic fuel, generates an exothermic reaction and that heat converts the precursors into their corresponding oxide products in air. The process has high energy efficiency, fast heating rates, short reaction times, and high compositional homogeneity. To confirm the combustion synthesis reaction, FT-IR analysis was conducted using glycine with a carboxyl group and an amine as fuel to observe its bonding with metal element in the nitrate. TG-DTA, X-ray diffraction analysis, SEM and EDS were performed to confirm the formed phases and morphology. Powders with an uncontrolled shape were obtained through a general oxide-route process, confirming hollandite powders with micro-sized soft agglomerates consisting of nano-sized primary particles can be prepared using these methods.

• Journal of Photoscience
• /
• 제12권2호
• /
• pp.87-93
• /
• 2005

A new assay technique to distinguish between pure compounds and the isomeric mixtures has been suggested using single molecule (SM) fluorescence detection technique. Since the number of emission spots in a fluorophorespread film prepared from a genuine dye solution was determined by experimental condition, the deviation of spot numbers from the expected values could be considered to be an indication of lower purity of the sample solution. The lower limit of sample concentration for this assay was determined to be $5{\times}10^{-10}$ M to show uniform number of expected spots within 10% uncertainties in our experimental condition. An individual fluorescence intensity distribution for a mixture of isomers having doubly different emissivities was simulated by adding distributions obtained from Cy3 and nile red (NR) independently. The result indicated that the mixture could be identified from the pure compounds through the difference in the number of Gaussian functions to fit the distribution. This new assay technique can be applied to the purity test for synthetic biofluorophores which are usually prepared in small quantities not enough for classical ensemble assays.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.25-33
• /
• 1993

Formation reaction of Mn-Zn ferrite depending on various synthetic conditions of wet process was investigated using FeCl2.nH2O(n≒4), MnCl2.4H2O, ZnCl2 as starting materials. A stable intermediate precipitate was formed by the addition of H2O2. And the precipitate was hard to transform to spinel phase of Mn-Zn Fe2O4. Single phase of Mn-Zn Fe2O4 spinel was obtained above 8$0^{\circ}C$ reaction temperature. The powder had spherical particle shape and 0.02~0.05${\mu}{\textrm}{m}$ particle size. Fe(OH)2 solid solution, -FeO(OH) solid solution, -FeOOH, Mn-Zn Fe2O4 spinel were formed with air flow rate 180$\ell$/hr. However, single phase of Mn-Zn Fe2O4 spinel with cubic particle shape and 0.1~0.2${\mu}{\textrm}{m}$ particle size was formed with synthetic conditions of 8$0^{\circ}C$ and 90 munutes. The particle shape of the -FeOOH was needle-like.

• Korean Membrane Journal
• /
• 제2권1호
• /
• pp.60-63
• /
• 2000

The effect of Candida rugosa and steapsin lipase cleaning was investigated for ultrafiltration polyethersulphone membrane (30,000 dalton MWCO) fouled with the semi-synthetic type cutting oil. The experimental by the water circulator. The enzyme cleaning effect was measured with respect to temperature, cleaning time and enzyme concentration. The optimum cleaning condition for the system was 25$^{\circ}C$ and 2 hour cleaning with 1,000 unites/mL steapsin solution. The pure water flux improvement by the steapsin solution cleaning was about 17% at the optimum cleaning condition.

• 한국수산과학회지
• /
• 제28권6호
• /
• pp.812-813
• /
• 1995

Lactococcal cells are nutritionally fastidious and thus, generally cultured either in milk or M17 medium (Terzaghi and Sandine, 1975). In this study, Lactococcus cremoris wild-type (KH) and its less­proteolytic mutant (KHA1) cells were grown on the M17 medium or with modified M17 medium by replicated parallel experiments. The modified M17 medium had the same composition as M17 medium, except that lactose was replaced by glucose. Analyses of culture-broth samples, in which the M17 and the modified M17 media were used, were conducted by high-performance liquid chromatography (HPLC). But, working with these media created noisy problems in analyses of samples. Therefore, a new semi-synthetic medium was developed on the basis of nutritional requirements (Morishita et al., 1981). The composition of the semi-synthetic medium determined on the basis of the nutritional requirements and the composition of milk, is presented in Table 1. The composition of M17 medium is also presented and compared in the table. L. cremoris KH and KHA1 cells were grown again on the new synthetic medium containing glucose or lactose. The broth samples were then drawn and analyzed by HPLC. Clearer separations of fermented products were achieved from the new medium than those with the M17 and the modified M17 media. In comparison with the M17 or the modified M17 media, growth on the new medium was good (Kim et al, 1993). Additional fermentations were also carried out at a controlled pH of 7.0, where enhanced growth of lactococcal cells was obtained. In the fermentations, samples were also analyzed for the concentrations of sugar and lactic acid. The results showed that the new synthetic medium was as good as or better than the M 17 and the modified M 17 media. This is because casein hydrolysate in the synthetic medium provided a ready supply of amino acids and peptides for L. cremoris KH and KHA1 cells. Lactic acid bacteria (LAB) including Lactococcal cells have been known to be an effective means of preserving foods, at the same time as giving particular tastes in fields of dairy products. LAB also have always occupied an important place in the technology of sea products, and marine LAB have known to be present in traditional fermented products (Ohhira et al, 1988). To apply the new synthetic medium to marine LAB, two different LAB were isolated from pickled anchovy and pollacks caviar and were grown on the new media in which various concentrations of NaCl $(3, 5, 7 and 10\%)$ added. They were also grown on the medium solution in natural seawater $(35\%o\;salinity)$ and on the solution of natural seawater itself, too. As seen in Fig. 1, Marine LAB were grown best on the synthetic medium solution in natural seawater and the higher concentrations of NaCl were added to the medium, the longer lag-phase of growth profile appeared. Marine LAB in natural seawater were not grown well. From these results, the synthetic medium seems good to cultivate cells which are essential to get salted fish aged. In this study, it showed that the new synthetic medium provided adequate nutrition for L. cremoris KH and KHA1 cells, which have been used as cheese starters (Stadhouders et al, 1988). Using this new medium, the acid production capability of starter cultures could be also measured quantitatively. Thus, this new medium was inferior to the M17 or the modified M17 medium in culturing the cheese starters and in measuring fermentation characteristics of the starter cells. Moreover, this new medium found to be good for selected and well-identified marine LAB which are used in rapid fermentations of low-salted fish.