• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.214-220
• /
• 2008

The distortion effect of electrical response for two-dimensional (2-D) DC resistivity method was verified in terms of 2-D inversion result of synthetic data obtained by three-dimensional (3-D) modeling, which is frequently applied to assess the safety of center core-type fill dam structure. The distortion effect is due to 2-D interpretation for 3-D structure. By the modeling analysis, we found that the water level is correctly described in the resistivity section around the middle part rather than each end side of the embankment due to the 3-D terrain effect, when the material of the embankment is assumed as horizontally uniform. And when we set the slope of outer rock fill part as uniform. the sharper the slope of the center core is, the more similar the resistivity section reflects. On the other hand, when the slope of the rock fill is steep, the resistivity section shows the water level at lower position than the real one, and the 3-D distortion effect at the end side of the embankment was enhanced.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.66-71
• /
• 2006

Fluoroquinoles have a wide range of antimicrobial properties and are effective in the treatment of bacterial diseases in fish. The use of fluoroquinoles continues to grow steadily. Fluoroquinolone antibiotics are probably the most important class used among synthetic antibiotics in human and veterinary medicines because of their broad activity spectrum and good oral absorption. This study was conducted to estimate the residue of antibiotics in four species of farmed fishes, including olive flounder (Paralichthys olivaceus), black rock fish (Sebastes schlegeli), red sea bream (Pagrus major), and sea bass (Lateolabrax japonicus), collected from fish farms located in the southern coastal area of Korea. The residues of fluoroquinolones were determined using high performance liquid chromatography (HPLC) with a fluorescence detector. Residuals of five fluoroquinolones in muscle tissue of farmed fish were analyzed. We found that enrofloxacin was the most common agent in fish muscle, and that ciprofloxacin was the next most common. The range of detected concentrations of fluoroquinolones in olive flounder muscle was 0-0.859 mg/kg in 32.6% of all samples. Enrofloxacin was commonly detected in sea bass muscle at a range of 0-0.143 mg/kg in 38.9% of all samples. Fluoroquinolones were detected in 6.9% of black rock fish muscle and in 16.6% of sea bream, although the detected concentration was below 0.01 mg/kg. The maximum detection value of enrofloxacin and ofloxacin in olive flounder at the time of shipping was 0.102 mg/kg and 0.09 mg/kg, respectively; no other antimicrobials were detected. We detected no antimicrobial substances in red sea bream.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.157-171
• /
• 2019

The fracturing by liquid carbon dioxide ($LCO_2$) as a fracking fluid has been an alternative to mitigate the environmental issues often caused by the conventional hydraulic fracking since it facilitates the fluid permeation owing to its low viscosity. This study presents how $LCO_2$ injection influences the breakdown pressure, acoustic emission, and fracture morphology. Three fracturing fluids such as $LCO_2$, water, and oil are injected with different pressurization rate to the synthetic and porous mortar specimens. Also, the shale which has been a major target formation in conventional fracking practices is also tested to examine the failure characteristics. The results show that $LCO_2$ injection induces more tortuous and undulated fractures, and particularly the larger fractures are developed in cases of shale specimen. On the other hand, the relationship between the fracturing fluids and the breakdown pressure shows opposite tendency in the tests of mortar and shale specimens.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.428-439
• /
• 2021

A spray-on membrane is a material composed of a polymer, and is a spray-type material that is expected to be able to replace materials such as existing shotcrete or sheet membrane for support or waterproofing purposes. In the previous studies, it is expected that the thickness of the support material such as shotcrete can be reduced if the spray-on membrane is additionally installed on the existing cement-based support materials. In this study, a three-point bending test was performed by a spray-on membrane on the high-performance shotcrete on the outside, and comparison was made between the case where high-performance shotcrete and a spray-on membrane were installed. As a result of comparing the values calculated through the standard test and the real-size bending test, there was no significant difference in terms of flexural strength, but it was found that there was a difference in flexural toughness.

• Tunnel and Underground Space
• /
• v.32 no.3
• /
• pp.219-230
• /
• 2022

The Geo-Reservoir Experimental Analogue Technology (GREAT) cell was designed to recreate the thermal-hydro-mechanical conditions of deep subsurface in the laboratory. This apparatus can generate a polyaxial stress field using lateral loading elements, which rotate around the longitudinal axis of a sample and is capable of performing a fluid flow test for samples containing fractures. In the present study, numerical simulations were carried out for triaxial compression tests using the GREAT cell and the mechanical behavior of samples under different conditions of lateral loading was investigated. We simulated an actual case, in which triaxial compression tests were conducted for a polymer sample without fractures, and compared the results between the numerical analysis and experiment. The surface strain (circumferential strain) of the sample was analyzed for equal and non-equal horizontal confining pressures. The results of the comparison showed a good consistency. Additionally, for synthetic cases with a fracture, we investigated the effect of the friction and type of fracture surface on the deformation behavior.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.506-525
• /
• 2007

Incision into bedrock channel is the primary control of landform evolution, but research into bedrock incision process stagnated for long time. Due to the scaling problem of the application of results from flume studies to bedrock channel, there is a strong need to simulate the bedrock incision process with more realistic models. As a part of investigation into controls of bedrock channel incision, three-dimensional changes of rock surface with abrasion was investigated with physical modelling. 18 rock plates were abraded with various sediment particle size and sediment load and abraded surfaces of the plates were scanned with high resolution 3-D scanner. To identify the spatial pattern of erosion of the rock plates, various methods were used. There was no synthetic or holistic method that showed all features of bedrock plate produced by abrasion, so each plate was analyzed using some available methods. Contour maps, shaded relief maps and profiles show that abrasion concentrated on the centre of plate (cross profile) and upstream and downstream edges (longitudinal profile) and eroded area extended inwards. It also found that the cracks and boundaries of forming materials easily eroded than other parts. Changing patterns of surface roughness were investigated with profiles, regression analysis and spectral analysis. Majority of plates showed decrease in small-scale roughness, but it depends on microstructures of the plates rather than general hardness or other factors. SEM inspection results supported this idea.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.439-448
• /
• 2012

The aim of this study is to develop eco-friendly, fundamental technology for vegetative restoration of barren lands using green rehabilitation material, for the stabilization of abandoned mine debris slopes and depository slopes composed of rock fragments. It is expected that such methods would help to improve the negative view of artificial slopes that remain following mining activity, while also contributing to slope stabilization and prevention of the loss of rock fragments and the dispersion of tailings. We tested the tensile strength and tear strength of various materials, including commonly used natural coir material, natural fibers, and synthetic textile materials with enhanced durability. In conclusion, there is the possibility that natural coir can be used as an eco-friendly material in vegetation restoration, while its durability in natural conditions can be improved by controlling the degree of knot convolution and by antibacterial treatment against biodegradation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.19 no.3
• /
• pp.55-71
• /
• 1991

The purpose of this thesis is to suggest objective basic data for the environmental design through the quantitative analysis of the visual quality included in the physical environment of Basemsagol valley sequence landscape. For this, visual volumes of physical elements have been evaluated by using the mesh analysis, spatial images structure of physical elements have been analyzed by factor analysis algorithm, and degree of visual quality have been measured mainly by questionnaires. Also, this study aims to understand semiotics and to grope the possibility of application to the sequence landscape assessment. A semiological approach suggests a new dimension in sequence landscape assessment, which is a contrast to the existing scientific evaluation methods. Result of this thesis can be summarized as follows. Visual volumes of the immediate vegetation, rock, bridge, road and distant vegetation are found to be the main factor determining the visual quality. Factors covering the spatial image of natural park sequence landscape have been found to be the overall synthetic evaluation, potentiality, natural quality, spatial, appeal and dignity. By using the control method for the number of factors, T.V. has been obtained as 40.22%. The characteristics of the semiological approach is qualitative, open, holistic, and experiential, whereas that of the scientific approach is quantitative, closed, reductive, and experimental.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.1
• /
• pp.65-71
• /
• 2020

Glass reference materials have been essentially used for precise geochemistry analytical techniques. In order to make up for the drawback of synthetic glass reference materials, which have the high uncertainty caused by the difference in composition of natural rocks, we introduce a glass geostandard using natural glass. The NK-B1G sample, which comes from the Baekdusan obsidian, is a natural glassy rock that contains only few crystals such as microlites or inclusions. We examined the feasibility of the sample as a reference material for microanalysis like EPMA or LA-ICPMS.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.83-93
• /
• 1996

A method is proposed to estimate aquifer parameters in a heterogeneous and anisotropic aquifer under steady-state groundwater flow conditions on the basis of maximum likelihood concept. Zonation method is adopted for parameterization, and estimation errors are analyzed by examining the estimation error covariance matrix in the eigenspace. This study demonstrates the ability of the proposed model to estimate parameters and helps to understand the characteristics of the inverse problem. This study also explores various features of the inverse methodology by applying it to a set of field data of the Taegu area. In the field example, transmissivities were estimated under three different zonation patterns. Recharge rates in the Taegu area were also estimated using MODINV which is an inverse model compatible with MODFLOW.The estimation results indicate that anisotropy of aquifer parameters should be considered for the crystalline rock aquifer which is the dominant aquifer system in Korea.