• 유기물자원화
• /
• 제16권2호
• /
• pp.38-46
• /
• 2008

미생물의 세포벽을 구성하는 많은 생물고분자들이 금속이온의 흡착과 이온교환에 주된 역할을 한다는 사실이 연구자들에 의하여 보고되어져왔다. 미생물로부터 유도되어지는 생물고분자들은 이온교환수지나 킬레이팅 수지와 같은 합성 고부나들이 상업적인 흡착제로서 널리 사용되고 있지만, 산업적인 적용에서 다양한 금속 이온들을 회수하기 위한 생물 흡착제로서 유용하다. 이 연구에서는 금속을 제거하는데 유용하고 상업적인 생물고분자들이 소개되어질 것이다.

• 환경위생공학
• /
• 제11권1호
• /
• pp.17-25
• /
• 1996

Resins with cryptand 22 macrocyclic ligand attached to chloromethylated styrene-1,4-divinylbenzene by substitution reaction were prepared and the effect of pH, metal concentration and cross-linkage of the matrix on the adsorption for $UO_2^{2+}$, $Cd^{2+}$ and $Sm^{3+}$ was investigated. The metal ion was not adsorbed on the resins pH range below 3 but above pH 4 fast adsorption behavior was showed. The resin selectivity determined in ethanol matrix was in increasing order $UO_2^{2+}{\;}>Cd^{2+}{\;}Sm^{3+}$. In addition, these metal ion could be separated on the column packed with 1% crosslinked resin by pH 2.5 $HNO_3$ as an eluent.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.167-185
• /
• 2009

Environmental problems caused by extensive use of polymeric materials arise mainly due to lack of landfill space and depletion of finite natural resources of fossil raw materials like petroleum or natural gas. The substitution of synthetic petroleum-based resins with natural biodegradable resins appears to be one appropriate measure to remedy the above-mentioned situation. This study presents the development of a composite that uses environmentally degradable starch-based resin as matrix and natural mineral basalt fibres as reinforcement, and investigates the fibre's and the composite's mechanical properties. The tensile strength of single basalt fibres was verified by means of single fibre tensile tests and statistically investigated by means of a Weibull analysis. Prepreg sheets were manufactured by means of a modified doctor blade system and hot power press. The sheets were used to manufacture specimens with fibre volume contents ranging from 33% to 61%. Specimens were tested for tensile strength, flexural strength and interlaminar shear strength. Composites manufactured during this study exhibited tensile and flexural strength of up to 517 MPa and 157 MPa, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.457-460
• /
• 2008

최근의 콘크리트 기술은 시멘트 제조기술의 발전 보다는 화학 혼화제의 기술발전에 의하여 성장하였다. 현재, 콘크리트 산업에 주로 사용되고 있는 4가지 화학 혼화제로서 변형된 리그닌(LS), 나프탈렌계(SNF), 멜라민계(SMF) 및 폴리카르복실레이트계(PC)계가 있다. 본 연구에서는 SMF계 고유동화제를 멜라민과 포르말린의 몰비를 변화 시키며 4단계로 나누어 반응을 진행시켰다. 합성된 SMF계 고유동화제를 시멘트 콘크리트에 적용하여 작업성, 슬럼프 손실 및 압축강도를 SNF와 비교하였다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2007년도 제25회 학술대회발표 논문집
• /
• pp.65-66
• /
• 2007

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.415-418
• /
• 2005

Nowadays the three major commercially available of organic chemical admixtures are modified lignosulfonates(LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehye (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps. Hydroxymethylation (Step 1), Sulfonation (Step 2), Polymerization (Step 3) and Neutralization and Stabilization (Step 4). In this synthesis of SMF, reaction conditions such as the mole ratio of melamine to formaldehyde and the amount of acid catalyst were changed. After application of SMF superplasticizer to cement paste and mortar, the physical properties including workability, slump loss, compressive strength were compared.

• 산업경영시스템학회지
• /
• 제5권7호
• /
• pp.43-48
• /
• 1982

As the result of processing improvement of Telephone Dial by substituting. Synthetic Resin for metalic materials, improved characteristics of quality can be gained as follow. 1. By the improvement of structure and assembling of the Telephone Dial, the complex process of manufacture can be a simplified one, and at the same time the working process can be done in the form of assembly. 2. In the efficiency test of the Telephone Dial, the noise decreases by 5% compared with the first test. In the test of life and environment, it accords with the standard of the Ministry of Communications and its function betters. 3. By using synthetic resins instead of metalic materials the cost can be reduced by \340 than the first improvement and it also brings the heightend value.

• 통상정보연구
• /
• 제10권1호
• /
• pp.175-191
• /
• 2008

Materials Industry has a very large ripple effect on national economic development. Nevertheless, Korea has been passing over importance of this Industry. So, this study examined competitiveness on ten chief exporting items to U.S.A market based on the understanding of vital role of materials industry in the national economy. Analyzing methods were Market Share, Trade Specialization Index(TSI), and Market Comparative Advantage(MCA) and the data were collected through parts and materials statistical data which produced by Korean Commerce and Industry Minister. From this study, following results were found. i) Highly ranked items of U.S.A market share were chemical fiber drapery weaving, synthetic fiber. These items commanded over 10% share of the same market and tire, steel wire occupied 9.05%, 8.65% respectively. ii) In searching trade balance aspects through TSI, tire and steel wire secured very powerful competitiveness among examined items in trading with U.S.A. while synthetic resins and other plastic material were very weak competitiveness in the same market. iii) Analysis results of market competitiveness by MCA, indicated that chemical fiber drapery weaving, synthetic fiber and tire ensured high-powered competitiveness in U.S.A Market. Therefore, these items would be positioned as main items in the market.

• 공업화학
• /
• 제21권2호
• /
• pp.142-147
• /
• 2010

1%, 2%, 10% 및 18%의 가교도를 가진 스타이렌(제4류 위험물 중 제2석유류) 디비닐벤젠 공중합체에 1-aza-18-crown-6 거대 고리 리간드를 치환반응으로 결합시켜 수지들을 합성하였으며, 이들 수지의 합성은 염소 함량과 원소 분석, 비표면적(BET), 그리고 IR-분광법으로 확인하였다. 물 소화약제로부터 합성수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간 그리고 수지의 가교도에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였고, 수용액에서 수지에 대한 흡착 선택성은 나트륨($Na^{1+}$) > 아연($Zn^{2+}$) > 크롬($Cr^{3+}$) 이온의 순서이며, 금속 이온의 흡착력은 1%, 2%, 10% 및 18%의 가교도 순이었다.

• 접착 및 계면
• /
• 제14권3호
• /
• pp.128-134
• /
• 2013

본 연구에서는 합성수지 접착제를 대체하여 토기 유물에 활용할 수 있는 천연접착제를 개발하기 위해 옻과 아교를 배합하여 시료를 제조하였고 이에 대한 구조적 물리적 특성을 분석하였다. 구조분석 결과 옻에 배합하는 아교의 비율이 높아질수록 carbonyl (C=O), amine (N-H), aromatic (C=C) 결합이 증가하는 것을 확인하였다. 또한 제조한 천연접착제를 합성수지 접착제와 비교하였을 때 낮은 접착강도를 가진 Paraloid B-72부터 높은 접착강도의 Araldite rapid type에 상응하는 다양한 점도와 접착강도를 가지고 있음을 확인하였다. 이를 바탕으로 하여 향후 체계적이고 심화된 분석이 이루어 진다면 훼손된 토기 유물의 접착 및 복원을 위한 친환경 천연접착제의 실용화가 가능할 것으로 사료된다.