석탄을 개질한 합성천연가스의 조성에 변화가 있을 경우 화염의 연소특성에 대하여 연구하였다. 본 연구의 목적은 동축 공기 합성천연가스 확산화염을 구현하여 연료조성에 따른 화염안정성과 화염구조, 분광특성, 온도분포를 실험적인 방법으로 연구하는 것이다. 각 화염의 분광특성을 관찰하기 위하여 분광기를 사용하였으며 연소장 내 온도측정을 위하여 K 형 열전대를 사용하였다. 연료 분사기 출구속도는 $u_F$ =5~40 m/s 사이에서 조절하였고 공기 분사기 출구속도는 $u_A$ =0~0.43 m/s 사이에서 조절하였다. 연소 동특성에 대한 실험을 통해 합성천연가스에 수소 성분이 증가하면 화염안정화 영역이 증가하고 부상화염 높이가 낮아져 화염길이가 짧아지는 것을 알 수 있었다.
Zheng, Quanan;Susanto, R. Dwi;Ho, Chung-Ru;Song, Y. Tony;Xu, Qing
대한원격탐사학회:학술대회논문집
/
대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
/
pp.938-941
/
2006
Satellite synthetic aperture radar (SAR) images from 1995 to 2001 and field measurements of sea surface wind, sea state, and vertical stratification are used for statistical analyses of internal wave (IW) occurrence and SAR imaging conditions in the northern South China Sea (NSCS). Latitudinal distribution of IW packets shows that 22% of IW packets distributed in the east of $118^{\circ}E$ and 78% of IW packets in the west of $118^{\circ}E$. The yearly distribution of IW occurrence frequencies reveals an interannual variability. The monthly SAR-observed IW occurrence frequencies show that the high frequencies are distributed from April to July and reach a peak in June. The low occurrence frequencies are distributed in winter from December to February of next year. These statistical features are explained by solitary wave dynamics.
International Journal of Aeronautical and Space Sciences
/
제16권3호
/
pp.339-346
/
2015
Aerodynamic flow control phenomena were investigated with a low-current DC surface discharge plasma actuator. The plasma actuator was found to operate in three different discharge modes with similar discharge currents of about 1 mA or less. Stable continuous DC discharge without audible noise was obtained at higher ballast resistances and lower discharge currents. However, even with continuous DC power input, a low-frequency self-pulsed discharge was obtained at lower ballast resistances, and a high-frequency self-pulsed discharge was obtained at higher set-point currents and higher ballast resistances, both with audible noise. The Schlieren image reveals that the low-frequency self-pulsed mode produces a synthetic jet-like flow implying that a gas heating effect plays a role, even though the discharge current is small. The high-frequency self-pulsed mode produces pulsed jets in a tangent direction, and the continuous DC mode produces a steady straight pressure wave. Particle image velocimetry (PIV) images reveal that the induced flow field by the low-frequency self-pulsed mode has flow propagating in the radial direction and centered between the electrodes. The high-frequency self-pulsed mode and continuous DC mode produce flow from the anode to the cathode. The perturbed region downstream of the cathode is larger in the high-frequency self-pulsed mode with similar maximum speeds.
In this paper we showed the application of European Space Agency's C-band Sentinel-1 Synthetic Aperture Radar (SAR) imagery to identify land subsidence in a heavily groundwater pumping area. We used the repeat pass satellite interferometry method in combination with persistent scattering (PS) interferometric technique to generate and analyze twenty-eight interferograms for the period October 2014 to November 2016. The interferometry results show that land subsidence is more pronounced in the urban areas. Excessive groundwater pumping in the study area is believed to be the main reason for land subsidence. The results are compared with the subsidence rate measured by GPS as reported in other studies and with the mean change in total water storage field of GRACE solutions provided by the Jet Propulsion Laboratory (JPL), the German Research Centre for Geosciences (GFZ) and the Center for Space Research (CSR). The comparison shows persistently decreasing trends during the period of study. A strong reliance of the trend of land subsidence on the temporal decline in total water storage proposes that much of the land subsidence can be attributed to heavy pumping of the groundwater.
항공기 엔진 배기노즐 표면으로부터 적외선 방사를 낮추기 위한 연구의 일환으로 스테인리스 스틸 표면을 구리입자/메타 아라미드 수지 복합재료로 도포하여 $320^{\circ}C$에서 적외선 방사율을 측정하였다. 일반적인 충전제 입자 바인더 합성수지의 경우 $300^{\circ}C$이전에서 대부분 열분해를 일으키지만 메타 아라미드 수지는 $320^{\circ}C$에서도 열안정성을 보여 구리입자 분산 내열성 매트릭스 수지로 적합한 것으로 나타났다. 본 연구에서는 첨가한 구리입자 함량은 부피기준으로 0 ~ 70% 까지 변화시켰다. 구리입자/메타아라미드 복합재료 수지로 도포된 시편은 $320^{\circ}C$에서 적외선 방사율 측정 실험 후에 접착력이 우수하였다. 그리고 구리입자 함량이 부피 기준으로 50%인 구리입자/메타 아라미드 수지를 도포함으로써 시편의 $320^{\circ}C$ 적외선 방사율을 0.6 까지 낮출 수 있었다.
Ultrasound and Surfactant aided soil washing process has been shown to be an effective method to remove diesel from soils. The use of surfactants can improve the mobility of diesel in soil-water systems by increasing solubility of adsorbed diesel into surfactant micelles. However, a large amount of surfactant is required for treatment. In addition, synthetic surfactants, specially anionic, are more toxic and the surfactant wastewater is hard to treat by conventional wastewater treatments even by AOPs. Ultrasound improves desorption of the diesel adsorbed on to soil. The mechanisms are based on physical breakage of bonds by hot spot, directly impact onto soil particle surface, the fragmentation of long-chain hydrocarbons by micro-jet and microstreaming in the soil pores. The use of ultrasound as an enhancement method in both anionic and nonionic surfactant aided soil-washing processes were studied. And all experiments were examined proceeded under CMC surfactant concentration, frequency 35 khz, power 400 W, Soil-water ratio 1:3(wt%), particle size 0.24 ~ 2mm and initial diesel concentration. 20,000 mg/kg. Combination with ultrasound showed significant enhancements on all the processes. Especially, nonionic surfactant Triton-X100 with ultrasound showed remarkable enhancements and diesel removal rate enhanced by ultrasound helps desorpting of surfactant adsorbed onto soils which prevented decreasing surfactant activity.
Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.
Kim, Se-Woong;Jung, Yeon-Gil;Park, Jong-Im;Roh, Sangho
한국수정란이식학회지
/
제29권3호
/
pp.229-234
/
2014
The aim of the present study was to compare two different serum-free media, modified synthetic oviduct fluid (mSOF) and modified potassium simplex optimization medium (mKSOM) containing 20% RD (RPMI1640 + DMEM, 1:1 v/v) (RD-mKSOM), for in vitro culture (IVC) of bovine embryos. After in vitro maturation and fertilization, the presumptive zygotes were cultured in two different serum-free conditions for 7 days and 9 days to evaluate blastocyst formation and hatching, respectively. Serum supplemented conventional CR2 medium was used as control. After 7 day of culture, there was no significant difference in cleavage and blastocyst formation rates among three groups (mSOF, 59.3 and 30.1%; RD-mKSOM, 65.0 and 41.5%; control, 51.6 and 38.0%, respectively). Hatching rate was significantly higher in control (69.0%) than other experimental groups (mSOF, 22.0%; RD-mKSOM, 39.5%) (P<0.0001 and P<0.001, respectively). Although both serum-free conditions showed lower hatching rates than serum-added control, in serum-free groups, RD-mKSOM showed significantly higher hatching rate than mSOF (P<0.001). In addition, one-step using RD-mKSOM may facilitate IVC procedure than two-step culture system. In conclusion, the results indicate that one-step RD-mKSOM is more suitable defined culture system for IVC of bovine embryos than two-step mSOF.
극초음속 비행체에서는 공기와의 마찰열과 엔진열의 증가로 기체 내부의 열적 부하가 발생한다. 이는 비행체 내부 구조물의 변형을 일으키고 오작동을 발생시킬 수 있다. 흡열연료는 액체 탄화수소 연료로써 흡열반응을 통해 열을 흡수할 수 있는 연료이다. 본 연구에서는 exo-tetrahydrodicyclopentadiene을 모델연료로써 선정하고 제올라이트 촉매의 금속담지를 통하여 흡열특성의 변화를 측정하는 연구를 수행하였다. 이를 통하여 상용촉매보다 우수한 흡열성능을 가지는 촉매를 확보하였다. 본 연구의 목적은 흡열량 향상에 미치는 촉매의 특성을 연구하는 것이다. 이 촉매는 상용촉매를 대체하여 exo-THDCP를 흡열연료로 사용하는 시스템에 적용될 수 있을 것이다.
화산체의 미세 지표변위 관측은 화산의 위험성과 분화 가능성을 평가하는데 중추적인 역할을 한다. 화산체 관측을 위해 고정 지상 관측 장비들을 이용할 경우 유지 관리가 어렵고 위험 및 비용 지출이 큰 반면, 인공위성을 이용한 원격탐사 기법은 저비용으로 정기적인 모니터링이 가능하다. 이 논문에서는 인공위성 합성개구레이더(Synthetic Aperture Radar; SAR) 간섭기법(Interferometric SAR; InSAR)을 Galapagos Sierra Negra 화산에 적용하여 2005년 화산분화 이전의 변형을 효과적으로 연구한 Chadwick et al.(2006)의 연구에 이어, 가장 최근에 이 화산체가 어떠한 화산활동을 하고 있는지를 최신 SAR 인공위성인 Sentinel-1자료를 이용하여 분화 전 마그마 활동을 분석하였다. 2017년 1월부터 2018년 1월까지의 descending mode Sentinel-1A SAR 영상을 취득하여 고정산란체 간섭기법(Persistent Scatter InSAR)을 적용하였으며, Mogi model을 통해 최근 마그마의 활동 깊이 및 팽창량을 추정하였다. 그 결과 2018년 6월 분화 이전의 화산체 활동 양상이 2005년 분화 이전의 활동 양상과 유사하다는 사실을 확인하였고, 활동 깊이와 팽창 반경을 추산해 내는 데 성공하였다. 본 연구 결과는 인공위성 SAR와 역산 기법을 통해 화산체의 활동 양상을 특징짓고 이를 통해 화산분화의 조기 모니터링 가능성을 제시하고 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.