• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2020년도 정기학술대회 발표논문집
• /
• pp.215-215
• /
• 2020

• KSBB Journal
• /
• 제18권5호
• /
• pp.398-403
• /
• 2003

고체배양을 통해 10종의 균주 중에서 선별된 고활성 균주인 T. versicolor KCTC 16781은 100 mg/L의 6가지 염료(reactive blue 19, reactive blue 49, reactive black 5, acid black 52, reactive orange 16, and acid violet 43)를 15일 이내에 효율적으로 분해하였다. T. versicolor KCTC 16781은 액체배양에서 반응 2-3일 이내에 6가지 염료의 색도를 100% 제거시켰으며, 배양 초기에 빠른 속도로 효소를 생산하여 높은 활성을 보였다. 이로 인해 색도제거 속도가 기존의 연구에 보고된 결과들보다 우수함을 입증하였다. 서로 다른 종류의 염료분해 실험에서, 효소활성이 반응 초기에 작은 차이를 보였지만, 최대 효소활성에 도달한 후의 값이 2.0$\pm$0.5 U/mL의 범위에 들어 염료의 종류에 관계없이 비슷한 범위의 활성을 보이는 것을 확인할 수 있었다. 염료의 색도제거가 완벽하게 이루어진 후에도 효소활성은 감소하지 않았으며, 배양 말기까지 2.0 U/mL 이상의 효소활성을 유지하여 고농도의 염료를 제거할 수 있는 가능성을 보였다.

• 한국버섯학회지
• /
• 제20권2호
• /
• pp.86-91
• /
• 2022

큰느타리(Pleurotus eryngii)는 azo계 염료인 CR, heterocyclic계 염료인 MB, triphenyl methane계 염료인 CV와 MG를 고체와 액체 배양 상태에서 모두 분해할 수 있었으며 고체 배양 조건에서는 CR을, 액체 배양 상태에서는 MG을 가장 효과적으로 분해했다. MB는 고체와 액체 배양 조건에서 모두 가정 적게 분해되었다. 4 종류의 염료 모두 균사의 생장을 저해했으나 MG의 영향이 가장 크게 나타났다. 활성을 측정한 두 종류의 리그닌 분해 효소 중 모두 laccase의 활성이 훨씬 높았으며 MnP 역시 활성은 낮았으나 laccsse와 비슷한 경향을 보였다. 따라서 큰느타리는 주로 laccase를 사용하여 방향족 합성염료를 분해하는 것으로 추정된다. CR, MB, CV는 laccase의 활성과 염료 분해 정도가 양의 상관관계를 보인 반면 MG의 경우 높은 효소 활성을 나타낸 후 염료의 분해가 진행되었다. 또한 MG가 모두 분해되었을 때의 laccase 활성(0.07 U/ml)이 다른 염료가 가장 많이 분해되었을 때의 활성(0.10 U/ml)보다 낮았는데 이는 큰느타리의 균사체가 MG를 분해하는 기작이 CR, MB 및 CR 등의 염료를 분해하는 기작과 차이를 보인다는 것을 알 수 있었다. 본 연구에서는 큰느타리의 방향족 합성염료 분해 능력에 대해 밝힘으로써 앞으로 국내산 버섯균주를 이용한 친환경적인 합성염료 처리 기술 개발에 도움을 줄 것으로 기대된다.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.29-38
• /
• 2009

Natural dyes seem to be more profitable on human and environment, and recently they could be considered as a better alternative to synthesized dyes. The aim of the current work was to investigate the dyeing property and antimicrobial activity of commercial cotton fabrics dyed with kumazasa (usually called in japan) which is known as conventional japan bamboo leaves. Actually, the dyeability and antimicrobial property of dyed fabric with natural mordant/dyeing was compared with synthetic mordant/dye process. The results of this study obtained are as follows. The apparently colour of kumazasa leaves extract dyed fabrics showed with light green or slightly yellow-green. In colorfastness to washing, ${\Delta}E$ and K/S values of dyed fabrics with natural chitosan as mordant used was shown to be more excellent results, than was synthetic mordant used. However, the decrease rate was recorded nearly 50% when washing repeated 20 cycles. In result of antimicrobial effect for bacteria, the dyed fabrics didn't show the significant antimicrobial activity to the both dyed with and without mordant. Results of this investigation considered that low-cost, natural, bio-mordant are relatively effective in natural coloration.

• 한국균학회지
• /
• 제40권2호
• /
• pp.98-103
• /
• 2012

본 연구에서는 백색부후균 중 줄버섯, 단색털구름버섯, 산느타리 및 유관버섯 등의 균사체를 이용하여 congo red, amaranth, orange G 및 methylene blue 등의 합성염료 탈색에 관한 실험을 수행하였다. 실험 결과 줄버섯과 단색털구름버섯은 congo red가 함유된 고체와 액체배지에서 이들 염료를 93~95% 탈색하였으며 amaranth는 약 80%, orange G는 62~70% 탈색시키는 것으로 나타났으나 유관버섯에 의한 3종류의 염료 탈색율은 30% 내외로 매우 낮았다. congo red, amaranth 및 orange G 등 각각의 염료가 첨가된 배지에서의 염료 탈색율은 이들 배지에서 배양한 균사체의 생장과 상관관계가 있는 것으로 나타났다. 그러나 모든 공시 균주는 methylene blue가 함유된 고체와 액체배지에서 methylene blue를 효과적으로 탈색하지 못하는 것으로 나타났다. 공시된 백색부후균의 액체 배지에서의 리그닌 분해효소 생산을 탐색하기 위해 1%의 나프탈렌이 첨가된 PDB 배지에 공시균을 10일 간 배양 후 효소의 종류와 양을 분석한 결과 모든 공시균은 laccase, lignin peroxidase 그리고 manganese peroxidase 등의 효소를 생산하는 것으로 확인되었으며 공시균주 중 줄버섯이 리그닌 분해 효소의 생산이 가장 왕성한 것으로 나타났다.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.63-68
• /
• 2006

In synthetic/spandex blends fibers, contents of the synthetic fiber by percentage is higher than those of spandex. Thus, the dyeing process of the blends fiber is mainly focused on the synthetic fiber, but not the spandex. In this study, we used several series of vat dyes for dyeing the nylon/spandex blend fabrics and their dyeing properties(fk value) were investigated at various reduction agents, temperatures, pH which have the potential for deep shade dyeing effects. The formamidinesulfinic acid were found to be effective to increase the fk values of the blend fiber compared to sodium hydrosulfite and Rongalit C. Higher temperature($100^{\circ}C$) and lower pH(pH 4) were observed as suitable conditions for maximum fk values.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.67-78
• /
• 1993

In one bath dyeing system of silk/PET fiber blend fabric with acid/disperse dyes, adsorption behavior of disperse dyes and acid dyes on silk and PET fabrics were examined. In the dyeing of PET with C.I.Disperse Red 19(Red 19) and C.I.Disperse Red 60(Red 60) at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake with Red 60 was higher than that with Red 19. When the silk/PET dyed with Red 19 and Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake on PET was influenced by affinity of the dye to the silk fabric dyed together. When the silk/PET dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$ for 60 minutes, color of PET dyed with Red 19 and Red 60 was little influenced by Blue 80 but silk dyed with Blue 80 was influenced. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.105-114
• /
• 2017

High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at $120^{\circ}C$ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.

• Journal of Microbiology and Biotechnology
• /
• 제29권9호
• /
• pp.1383-1390
• /
• 2019

In this study, we expressed cotA laccase from Bacillus subtilis on the surface of B. subtilis spores for efficient decolorization of synthetic dyes. The cotE, cotG, and cotY genes were used as anchoring motifs for efficient spore surface display of cotA laccase. Moreover, a $His_6$ tag was inserted at the C-terminal end of cotA for the immunological detection of the expressed fusion protein. Appropriate expression of the CotE-CotA (74 kDa), CotG-CotA (76 kDa), and CotY-CotA (73 kDa) fusion proteins was confirmed by western blot. We verified the surface expression of each fusion protein on B. subtilis spore by flow cytometry. The decoloration rates of Acid Green 25 (anthraquinone dye) for the recombinant DB104 (pSDJH-EA), DB104 (pSDJH-GA), DB104 (pSDJH-YA), and the control DB104 spores were 48.75%, 16.12%, 21.10%, and 9.96%, respectively. DB104 (pSDJH-EA) showed the highest decolorization of Acid Green 25 and was subsequently tested on other synthetic dyes with different structures. The decolorization rates of the DB104 (pSDJH-EA) spore for Acid Red 18 (azo dye) and indigo carmine (indigo dye) were 18.58% and 43.20%, respectively. The optimum temperature for the decolorization of Acid Green 25 by the DB104 (pSDJH-EA) spore was found to be $50^{\circ}C$. Upon treatment with known laccase inhibitors, including EDTA, SDS, and $NaN_3$, the decolorization rate of Acid Green 25 by the DB104 (pSDJH-EA) spore decreased by 23%, 80%, and 36%, respectively.

• Carbon letters
• /
• 제11권3호
• /
• pp.169-175
• /
• 2010

The study describes the results of batch experiments on the removal of Reactive Yellow 15 (RY15) and Reactive Black 5 (RB5) from synthetic textile wastewater onto Activated Carbon from Walnut shell (ACW). The experimental data were analyzed by the Langmuir, Freundlish, Temkin and Dubinin-Radushkevich (D-R) models of adsorption. The experiments were carried out as function of initial concentrations, pH, temperature (303-333), adsorbent dose and kinetics. The surface area and pore volumes of adsorbent were measured by BET and BJH methods. The findings confirm the surface area (BET) is 248.99 $m^2/g$. The data fitted well with the Temkin and D-R isotherms for RY15 and RB5, respectively. The most favorable adsorption occurred in acidic pH. Pseudo-second order kinetic model were best in agreement with adsorption of RY15 and RB5 on ACW. The results indicate that walnut shell could be an alternative to more costly adsorbent currently being used for dyes removal.