• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.135-141
• /
• 2012

Purpose: Polymerization of HEMA(2-hydroxyethyl methacrylate) which can be used in the soft contact lens has been performed by using electron beam(EB) irradiation, and examined the best condition for the polymerization. Comparing the physical properties of the contact lenses to the one fabricated by thermal polymerization method, we check the use possibility of the EB irradiation to the fabrication of the soft contact lens. Methods: We investigated the degree of polymerization of the HEMA according to the composition of the monomer, the additive ratio and the dose of electron beam (0~120 kGy). The degree of polymerization was measured depending on the EB dose to research the best synthetic condition under the EB irradiation. The physical properties of the contact lens such as water content(%), oxygen transmissibility(Dk/t) and optical transmittance were analysed by using the FT-IR results with comparing the two different polymerization method (thermal and electron beam polymerization) with same additive ratio. Results: When the dose of electron beam was above 100 kGy, the degree of polymerization of HEMA was above 99% with regardless using cross-linker and initiator. The water content of the lens fabricated by EB method showed 10% higher than the one by the thermal method which was 40%. The lens fabricated by EB method also showed higher oxygen transmissibility(Dk/t) as same with the water content, and showed twice higher value in the lens fabricated by pure HEMA. According to the FT-IR results, hydrophilic property of the lens fabricated by EB method was increased due to increasing the intermolecular hydrogen bonding. It showed above 90% optical transmittance in the visible range of wavelength on the contact lenses fabricated by the both of two different polymerization method. Conclusions: The polymerization of HEMA without cross-linker and initiator was successful above 100 kGy of EB irradiation. Moreover the lens fabricated from the polymer synthesized by pure HEMA with 100 kGy of EB showed the highest water content and oxygen transmissibility. Therefore EB irradiation is another possible method to synthesize the polymer which can be used for the soft contact lens.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.893-905
• /
• 2020

This study is a study on solubilization and emulsifying power of tocopheryl acetate using vegetable surfactants. High purity polyglyceryl-10 isostearate and polyglyceryl-10 oleate were mixed to synthesize a vegetable surfactant with excellent solubilizing power and emulsifying power. The mixed raw material was named Solubil EWG-1100. The appearance of this raw material was a pale yellowish paste with a specific smell, specific gravity of 1.12, and acid value of 0.085. The HLB value of this surfactant was calculated by the Griffin's equation with an average value of 15.17. The behavior of this surfactant to solubilize tocopheryl acetate was mechanically verified. The performance of solubilization was evaluated by a method of visual evaluation and was measured by a transmittance rate at 650 nm using a UV spectrophotometer. As a result, in the formulation using 3% ethanol as a co-solvent, the concentration of surfactant was required to solubilize tocopheryl acetate was required about 5 times of natural surfactant. In the formulation without ethanol as a co-solvent, the concentration of surfactant was required to solubilize tocopheryl acetate required about 7 times of natural surfactant. In addition, the concentration of surfactant required to make an emulsifivation 10 % of tocopheryl acetate was 1 wt% of Solubil EWG-1100, and the emulsified particle size was 3.5 mm in cream formula. In order to obtain stable and fine emulsified particles, it was found that as the concentration of tocopheryl acetate increased, the concentration of Solubil EWG-1100 also was to increase. As a result of testing the solubilizing power of the surfactant according to the pH various change, it showed stable solubilizing power in the acidic region of pH=3.2, the neutral region of pH=7.0, and the alkaline region of pH=11.8. As application, based on these results, it is expected that it can be widely applied to the cosmetics field that develops skin care prescriptions, sensitive skin products, and heavy dry skin products.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.114-126
• /
• 2012

The purpose of this study is to find ways of the view evaluation of biotope classification before development by selecting an area, which is as large as about $10.0km^2$ around Non Gong Up, Auk Po Myun, Dalsung Gun, Daugu where the large project has been planned, as a subject of this study. The results of this study are as follows. Because of the classification of biotope, there are 23 kinds of types that are subdivided into 140 types. Three surveys for selecting the assessment indicators were performed. The first survey analyzed the importance of 22 selected assessment indicators based on the evaluation of an existing literature review and on the spot research. The second survey performed factor analysis and reclassified the value indicators. The third survey computed additive values of the selected assessment indicators. It used a method of standardizing the average importance of indicators by making their sum equal by 10. Theses additive values were then multiplied by each grade of indicators in order to make a final evaluation. The number of assessment indicators finally selected through the survey of asking specialist is vitality elements, visual obstructs elements etc 19. According to the result of evaluation of 1st, 1 grade spaces which especially valuable is analyzed that 7 spaces, 2 grade spaces for 4, 3 grade spaces for 5, 4 grade space for 2, 5 grade space for 5. Because of the evaluation of 2st, 1 grade spaces which especially valuable(1a, 1b) is analyzed that 15 spaces, 2 grade spaces which valuable is analyzed that 28 space. As the evaluation of site suitability model of this study couldn't have high applicability to other similar area because of having only one site as a subject, it is needed to do synthesize and standardization of various examples to have higher objectivity later.

• Clean Technology
• /
• v.20 no.3
• /
• pp.306-313
• /
• 2014

Nanoporous $TiO_2$ films are commonly used as working electrodes in dye-sensitized solar cells (DSSCs). So far, there have been attempts to synthesize films with various $TiO_2$ nanostructures to increase the power-conversion efficiency. In this work, vertically aligned rutile $TiO_2$ nanorods were grown on fluorinated tin oxide (FTO) glass by hydrothermal synthesis, followed by deposition of an anatase $TiO_2$ film. This new method of anatase $TiO_2$ growth avoided the use of a seed layer that is usually required in hydrothermal synthesis of $TiO_2$ electrodes. The dense anatase $TiO_2$ layer was designed to behave as the electron-generating layer, while the less dense rutile nanorods acted as electron-transfer pathwaysto the FTO glass. In order to facilitate the electron transfer, the rutile phase nanorods were treated with a $TiCl_4$ solution so that the nanorods were coated with the anatase $TiO_2$ film after heat treatment. Compared to the electrode consisting of only rutile $TiO_2$, the power-conversion efficiency of the rutile-anatase hybrid $TiO_2$ electrode was found to be much higher. The total thickness of the rutile-anatase hybrid $TiO_2$ structures were around $4.5-5.0{\mu}m$, and the highest power efficiency of the cell assembled with the structured $TiO_2$ electrode was around 3.94%.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.147-169
• /
• 2015

Our society has been changed so rapidly and we have achieved industrialization and democratization swiftly. On our Economic growth and democratization, it is appraised that Christian Thought and western Capitalism thoughts have been one of the important factors. John Calvin, well known Reformer and thinker of Protestant, as M. Weber assessed, contributed greatly to the progress of Capitalism. He was a Religion Reformer as M. Luther and especially a thinker and man of deed, who affected large areas of human life such as Religion, Economy, Society and Politics. Calvin understood Economy is the main issue of theology and Economic activities can be a position which may restore the correct relationship of God and Man. This Paper aimed to survey, synthesize and systemize the Economy and Management thought of J. Calvin. On these changing current society, it surveyed if His thoughts that has long history, can be applicable or not and Where and How it may. Calvin's Thought not only on his age caused important changes and Reformation but now suggests critical milestones. His Thoughts of Love, Justice, and Fairness based on the Bible have been evaluated as the universal truth and important criteria. Until nowadays his Philosophy has composed critical Principles of decision making rules of Economy and Management and National policies. Especially today, when economy has been more emphasized as a center of our lives, His Thought suggests momentous directions on various Human Life such as Justice and Fairness, deepening of gap between poor and rich, expansion of conflicts among social classes, employment and wages, freedom of markets and its balance, and public good of land use. Reviewing Calvin's Economy and Management thoughts as meaningful basis on the our and world Economy which became worse caused by world monetary crisis and Europe financial crisis that aroused by world Economy globalization and expansion of neo-liberalism, this Paper suggested some future directions. And for the practical sectors, Distribution and Logistics, it proposed some issues and Directions, considering the impacts of His thoughts on the Industries. Nevertheless it can deliver some contributions, as a literature research, it reveals some limitations that it may contain lacking of practical investigations and cases on economy and management fields. In the future, more detailed and deeper research on the practical and situations of economy and management shall be needed.

• Tunnel and Underground Space
• /
• v.16 no.2 s.61
• /
• pp.109-134
• /
• 2006

Rocks undergo weathering processes influenced by changing in pressure-temperature condition, atmosphere, underground water, and rainfall. The weathering processes change physical and chemical characteristics of the rocks. Once the rocks are weathered, the characteristics of them are changed and, because of the changing, several disadvantages such as rock slope failures and underground water spouts are can occur. Before we cut a large rock slope, therefore, we must analyze current weathering conditions of rocks and predict weathering processes in the future. Through the results of such analyses, we can judge reinforcement works. In order to comply with such requests, chemical weathering sensitivity analysis which was analyzed from chemical weathering velocities and other characteristics of rocks has been applied in several prior construction works in Korea. But, It is defective to use directly in engineering fields because it was developed for soils(not rocks), it has too mny factors must be considered and the relationships between the factors are not clear, and it is hard to explain the weathering processes in engineering time range. Besides above, because it has been used for isotropic rocks, this method is hard to apply to anisotropic rocks such as sedimentary rocks. Acceding to studies from morphologists (e.g. Oguchi et al., 1994; Sunamura, 1996; Norwick and Dexter, 2002), time dependent strength reduction influenced by weathering shows a negative exponential function form. Appling this relation, one can synthesize the factors which influence the weathering processes to the strength reduction, and get meaningful estimates in engineering viewpoint. We suggest this weathering sensitivity characterization method as a technique that can explain time dependent weathering sensitivity characteristics through strength changes and can directly applied the rock slope design.

• Journal of Nutrition and Health
• /
• v.1 no.2
• /
• pp.61-85
• /
• 1968

The experiment was carried out on eight healthy male subjects of 19-22 years old and they were maintained The experiment was carried out on eight healthy male subjects of 19-22 years old and they were maintained under the rice diet, the general mixed diet and the high animal protein diet for 7 days of each experimental period, respectively. The composition of each diet was indicated in Table 3. The allowance' of each nutrient per head per day in each diet were as follows. a) In the rice diet; protein:139.5 g (animal source:64.6 g, vegetable source:74.9 g), fat:25.3 g (animal source:11.3 g, vegetable source:14.0 g), carbohydrate: 644.0 g, calcium:982.3 mg, phosphorus: 2369.2mg, thiamine:2.1 mg, riboflavin: 1.6 mg, and 3211 Cal. b) In the general mixed diet; protein: 97.4g (animal source: 10.5 g, vegetable source: 86.9 g), fat:40.3 g (animal source:7.1 g, vegetable source:33.2 g), carbohydrate:620.7 g, calcium:887.1m g, phosphorus:2200.8m g, thiamine: 1.8m g, riboflavin:1.9m g, and 3158 Cal. c) In the high animal protein diet; protein: 135.6 g (animal source:68.8 g, vegetable source:66.8 g), fat:32.5g (animal source:17.9 g, vegetable source:14.6 g), carbohydrate:930.9 g, calcium: 626.0 mg, phosphorus: 1998.9 mg, thiamine: 1.5 mg, riboflavin: 1.5 mg, and 3194 Cal. The absorption rates of protein, fat, carbohydrate, calcium, phospherus, thiamine and riboflavin in each diet were observed. The results obtained were summarized as follows: 1. The absorption rates of protein and fat in the rice diet were 88.t % and 71.3.%. 2. The absorption rates of protein and fat in the general mixed diet were 83.4% and 86.4%. 3. The absorption rates of protein and fat in the high animal protein diet were 86.8% and 82.4%. 4. The nitrogen balances in the rice, the general mixed and the high animal protein diet groups were +5.7g, +2.3g and +4.0g respectively. 5. The absorption rates of carbohydrate in each diet were all above 95 % and so seemed to be almost completely absorbed except the cellulose in the diets. 6. The calory utilization rates in each diet were all above 93 %. 7. The minimum absorption rates of protein, fat and calory were 83.8%, 63.3%, and 89.7% in the rice diet, 80.0%, 80.9% and 85.9%, in the general mixed diet and 83.6%, 75.7% and. 89.3 % in the high animal protein diet respectively. Therefore, it is assumed that these data might be significant in practical use. 8. The protein absorption rates of the rice diet (88.1 %) was better than that of the general mixed diet (83.4 %). 9. The fat absorption rates of the general mixed diet and the high animal protein diet (86.4% and 82.4%) were signficantly better than that of the rice diet (71.3%). 10. The calcium absorption rates of each diet, rice diet, the general mixed diet and the high animal protein diet were 41.6%, 36.0%, and 27.7%, respectively. 11. The phosphorus absorption rates of each diet were 51.4%, 56.0% and 52.3%, respectively.12. The phosphorus absorption rate seemed better than that of calcium. 13. The thiamine absorption rates of each diet seemed 27.0 %, 42.9 % and 29.5 %, respectively. 14. The riboflavin absorption rates of each diet seemed above 30.6%, 27.1%, and 39.3% respectively. 15. The excretion amounts of thiamine or riboflavin were much more than the amounts ingested of the both vitamins. Therefore, the certain amount of both vitamins seemed to synthesize in the intestine.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.219-226
• /
• 2013

Activated magnetite ($Fe_3O_{4-{\delta}}$) has the capability of decomposing $CO_2$ proportional to the ${\delta}$-value at comparatively low temperature of $300^{\circ}C$. To enhance the $CO_2$ decomposition capability of $Fe_3O_{4-{\delta}}$, $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$ were synthesized and then reacted with $CO_2$. $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ powders having Fe to Co mixing ratios of 9:1, 8:2, 7:3, 6:4, and 5:5 were synthesized by co-precipitation of $FeSO_4{\cdot}7H_2O$ and $CoSO_4{\cdot}7H_2O$ solutions with a $(NH_4)_2C_2O_4{\cdot}H_2O$ solution. The same method was used to synthesize $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ powders having Fe to Mn mixing ratios of 9:1, 8:2, 7:3, 6:4, 5:5 with a $MnSO_4{\cdot}4H_2O$ solution. The thermal decomposition of synthesized $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ and $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ was analyzed in an Ar atmosphere with TG/DTA. The synthesized powders were heat-treated for 3 hours in an Ar atmosphere at $450^{\circ}C$ to produce activated powders of $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$. The activated powders were reacted with a mixed gas (Ar : 85 %, $CO_2$ : 15 %) at $300^{\circ}C$ for 12 hours. The exhaust gas was analyzed for $CO_2$ with a $CO_2$ gas analyzer. The decomposition of $CO_2$ was estimated by measuring $CO_2$ content in the exhaust gas after the reaction with $CO_2$. For $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$, the amount of $Mn^{2+}$ oxidized to $Mn^{3+}$ increased as x increased. The ${\delta}$ value and $CO_2$ decomposition efficiency decreased as x increased. When the ${\delta}$ value was below 0.641, $CO_2$ was not decomposed. For $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$, the ${\delta}$ value and $CO_2$ decomposition efficiency increased as x increased. At a ${\delta}$ value of 0.857, an active state was maintained even after 12 hours of reaction and the amount of decomposed $CO_2$ was $52.844cm^3$ per 1 g of $(Fe_{0.5}Co_{0.5})_3O_{4-{\delta}}$.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.37-44
• /
• 2008

This study was performed to synthesize Na-A type zeolite with melting slag from the Mapo incineration site and recycle the zeolite as an environmental remediation agent. The melting slag used had a favorable composition containing 26.6% $SiO_2$, 10.9% $Al_2O_3$ and 2.7% $Na_2O$ for zeolite synthesis although there were high contents of iron oxides, including 19.6% $Fe_2O_3$ and 18.9% FeO, which had been used as a flux for the melting. It was confirmed that the Na-A type zeolite could be successfully synthesized at $80^{\circ}C$ and $SiO_2/Al_2O_3\;=\;0.80{\sim}1.96$. The cation exchange capacities (CEC) of the zeolites was determined to be about 220 cmol/kg leveled off at the synthetic time more than 10hrs. The adsorption capacities of zeolite to heavy metals (Cd, Cu, Mn and Pb) were high except for As arid Cr. It was also confirmed through the Eh and pH analysis that As and Cr existed in the forms of $HAsO_4^{2-}$ and $CrO_4^{2-}$. The low absorption rates of zeolite for As and Cr are attributed to the fact that the pore size ($4\;{\AA}$) of Na-A type is smaller than those of $HAsO_4^{2-}$ and $CrO_4^{2-}$ ions ($4\;{\AA}$ ionic radii and $8\;{\AA}$ diameter).

• KSBB Journal
• /
• v.29 no.4
• /
• pp.285-296
• /
• 2014

Although the problems of the algal blooms have been world-widely observed in freshwater, estuary, and marine throughout the year, it is not yet certain what are the basic causes of such blooms. Consequently, it is very difficult to predict when and where algal blooms occur. The constituents of the Asian dust are in a good agreement with the elements required for the algal growth, which suggests some possible relationship between the algal blooms and the Asian dust. There have been frequently algal blooms in drinking water from rivers or lakes. However, there is no any algal blooms in upwelling waters where the Asian dust cannot penetrate into the soil due to its relatively weak settling velocity (size of particles, $4.5{\pm}1.5{\mu}m$), which implies the possible close relationship of the Asian dust with algal blooms. The present initiative study is thus intended firstly in Korea to illustrate such a relationship by reviewing typical previous studies along with 12 years of weekly iron profiles (2001~2012) and two slant culture experiments with the dissolved Asian dust. The result showed bacterial suspected colonies in the slant culture experiment that are qualitatively in a good agreement with the recent Japanese studies. Since the diatoms require cheap energy (8%) compared to other phytoplankton (100%) to synthesize their cell walls by silicate, the present results can be used to predict algal blooms by diatoms if the concentrations of iron and silicate are available during spring and fall. It can be postulated that the algal blooms occur only if the environmental factors such as light, nutrients, calm water surface layer, temperature, and pH are simultaneously satisfied with the requirements of the micronutrients of mineral ions supplied by the Asian dust as enzymatic cofactors for the rapid bio-synthesis of the macromolecules during algal blooms. Simple eco-friendly methods to regulate the algal blooms are suggested for the initial stage of blooming with limited area: 1) to cover up the water surface with black curtain and inhibit photosynthesis during the day time, 2) to blow air (20.9%) or pure oxygen into the bottom of the water and inhibit rubisco for carbon uptake and nitrate reductase for nitrogen uptake activities in algal growth during the night, 3) to eliminate the resting spores or cysts by suction of bottom sediments as deep as 5 cm to prevent the next year germinations.