• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.183-189
• /
• 2013

This study was performed to investigate the whitening effects of Lactobacillus rhamnosus in addition to its antioxidative activities. The cytotoxicity of the Lactobacillus rhamnosus was 7.6% at 10.0% (v/v) concentration. Its cytotoxicity was lower than 3.2% of Lactobacillus casei when adding the same concentration. Lactobacillus rhamnosus exhibited high antioxidative activities at 14.9% of DPPH radical scavenging activity, and a lower reducing power was measured. Lactobacillus casei exhibited relatively lower antioxidative activities at 13.4%. The tyrosinase inhibition activity of Lactobacillus rhamnosus was observed at 31.3% when adding 10.0% (v/v), as compared to 17.7% for Lactobacillus casei. Lactobacillus rhamnosus demonstrated strong inhibition activity for melanin synthesis at 58.6% when adding 10.0% (v/v), while Lactobacillus casei increased to 80.6%. It was also observed that the high antioxidative activities of Lactobacillus rhamnosus were strongly correlated to whitening activities, due to the inhibition of both tyrosinase and melanin synthesis. These results support the expanded use of lactic acid bacteria as a functional bioresources in the cosmetics industry.

• The Korean Journal of Ecology
• /
• v.23 no.3
• /
• pp.217-221
• /
• 2000

The vegetation of Maemul, Somaemul and Eoyu islets in Tongyeong-si was investigated from September, 1996 through August, 1997. In order to analyze the vegetation of this islets, synthesis table, actual vegetation map were prepared. The predominant species of the islets was Camellia japonica. and the vegetation in this study area was classfied into 4 communties (included 1 afforestation) and 7 subcommunities 1 . Camellia japonica community 1) Typical subcommunity 2) Machilus thunbergii subcommunity 3) Castanopsis cuspidata var, thunbergii subcommunity 4) Ligustrum obtusifolium subcommunity 5) Carpinus coreana subcommunity 6) Selaginella tamariscina subcommunity 7) Pinus thunbergii subcommunity 2. Pinus thunbergii community 3. Alnus firma afforestation 4. Miscanthus sinensis var. purpurascens community.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10057-10059
• /
• 2015

Positron emission tomography (PET) as the functional component of current hybrid imaging (like PET/CT or PET/MRI) seems to dominate the horizon of medical imaging in coming decades. $^{18}$Flourodeoxyglucose ($^{18}FDG$) is the most commonly used probe in oncology and also in cardiology and neurology around the globe. However, the major capital cost and exorbitant running expenditure of low to medium energy cyclotrons (about 20 MeV) and radiochemistry units are the seminal reasons of low number of cyclotrons but mushroom growth pattern of PET scanners. This fact and longer half-life of $^{18}F$ (110 minutes) have paved the path of a centralized model in which $^{18}FDG$ is produced by commercial PET radiopharmacies and the finished product (multi-dose vial with tungsten shielding) is dispensed to customers having only PET scanners. This indeed reduced the cost but has limitations of dependence upon timely arrival of daily shipments as delay caused by any reason results in cancellation or rescheduling of the PET procedures. In recent years, industry and academia have taken a step forward by producing low energy, table top cyclotrons with compact and automated radiochemistry units (Lab-on-Chip). This decentralized strategy enables the users to produce on-demand doses of PET probe themselves at reasonably low cost using an automated and user-friendly technology. This technological development would indeed provide a real impetus to the availability of complete set up of PET based molecular imaging at an affordable cost to the developing countries.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.38-48
• /
• 2006

In this paper, we developed a hardware architecture of Reed-Solomon RS(255,239) decoder for the DMB mobile terminals. The DMB provides multimedia broadcasting service to mobile terminals, hence it should have small dimension for low power and short decoding delay for real-time processing. We modified Euclid algorithm to apply it to the key equation solving which is the most complicated part of the RS decoding. We also designed a small finite field divider to avoid the use of large Inverse-ROM table, and it consumed 17 clocks. After synthesis with Synopsis on Samsung STD130 $0.18{\mu}m$ Standard Cell library, the Euclid block had 30,228 gates and consumed 288 clocks, which gave the 25% reduced area compared to other existing designs. The size of the entire RS decoder was about 45,000 gates.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.8
• /
• pp.3463-3471
• /
• 2015

Background: The principal aim of health service providers in the field of breast cancer is to detect and treat lesions at an appropriate time. Therefore, identification of barriers to screening can be very helpful. The present study aimed to systematically review the qualitative studies for extracting and reporting the barriers of screening for breast cancer from the womans perspective. Materials and Methods: In this systematic review; Pubmed, Google Scholar, Ovid Scopus, Cochrane Library, Iranmedex, and SID were searched using the keywords: screening barriers, cancer, qualitative studies, breast and their Persian equivalents, and the needed data were extracted and analyzed using an extraction table. To assess the quality of the studies, the Critical Appraisal Skills Programme (CASP) tool was used. Results: From 2,134 related articles that were found, 21 articles were eventually included in the study. The most important barriers from the point of view of 1,084 women were lack of knowledge, access barriers (financial, geographical, cultural), fear (of results and pain), performance of service providers, women's beliefs, procrastination of screening, embarrassment, long wait for getting an appointment, language problems, and previous negative experiences. Articles' assessment score was 68.9. Conclusions: Increasing women's knowledge, reducing the costs of screening services, cultural promotion for screening, presenting less painful methods, changing beliefs of health service providers, provision of privacy for giving service, decreasing the waiting time, and providing high quality services in a respectful manner can be effective ways to increase breast cancer screening.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2364-2375
• /
• 1994

For the efficient recognition of printed Korean characters, a multiplexed minimum average correlation energy(MMACE) filter is proposed. Proposed method solved the disadvantages of the tree structure algorithm which recognition system is very huge and recognition method is sophisticated. Using only one consonant MMACE filter and one vowel one, we recognized the full Korean character. Each MMACE filter is multiplexed by 4 K-tuple MACE filters which are synthesized by 24 consonants and vowels. Hence the proposed MMACE filter and the correlation distribution plane are divided by 4 subregion. We obtained the binary codes for the Korean character recognition from each correlation distribution subplane. And the obtained codes are compared with the truth table for consonants and vowels in computer. We can recognize the full Korean characters when substitute the corresponded consonant or vowel font of the consistent code to the correlation peak place in the output correlation plane. The computer simulation and optical experiment results show that the proposed compact Korean character recognition system using the MMACE filters has high discrimination capability.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.49-60
• /
• 2012

In this paper, we propose a hardware design for correction of barrel distortion using the nearest coordinates in the corrected image. Because it applies the nearest distance on corrected image rather than adjacent distance on distorted image, the picture quality is improved by the image whole area, solve the staircase phenomenon in the exterior area. But, because of additional arithmetic operation using design of bilinear interpolation, required arithmetic operation is increased. Look up table(LUT) structure is proposed in order to solve this, coordinate rotation digital computer(CORDIC) algorithm is applied. The results of the synthesis using Design compiler, the design of implementing all processes of the interpolation method with the hardware is higher than the previous design about the throughput, In case of the rear camera, the design of using LUT and hardware together can reduce the size than the design of implementing all processes with the hardware.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.2
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3235-3245
• /
• 1996

A DDFS(Direct Digital Frequency Synthesizer) used in spread spectrum communication systems must need fast switching speed, high resolution(the step size of the synthesizer), small size and low power. The chip has been designed with four parallel sine look-up table to achieve four times throughput of a single DDFS. To achieve a high processing speed DDFS chip, a 24-bit pipelined CMOS technique has been applied to the phase accumulator design. To reduce the size of the ROM, each sine ROM of the DDFS is stored 0-.pi./2 sine wave data by taking advantage of the fact that only one quadrant of the sine needs to be stored, since the sine the sine has symmetric property. And the 8 bit of phase accumulator's output are used as ROM addresses, and the 2 MSBs control the quadrants to synthesis the sine wave. To compensate the spectrum purity ty phase truncation, the DDFS use a noise shaper that structure like a phase accumlator. The system input clock is divided clock, 1/2*clock, and 1/4*clock. and the system use a low frequency(1/4*clock) except MUX block, so reduce the power consumption. A 107MHz DDFS(Direct Digital Frequency Synthesizer) implemented using 0.8.mu.m CMOS gate array technologies is presented. The synthesizer covers a bandwidth from DC to 26.5MHz in steps of 1.48Hz with a switching speed of 0.5.mu.s and a turing latency of 55 clock cycles. The DDFS synthesizes 10 bit sine waveforms with a spectral purity of -65dBc. Power consumption is 276.5mW at 40MHz and 5V.

• YAKHAK HOEJI
• /
• v.36 no.1
• /
• pp.1-6
• /
• 1992

Irradiation of phenolbetaine in a stream of nitrogen produced 8,14-cycioberbine[1]. Compound[1] was treated with 10% HCl solution to give the 8-hydroxycycloberbine[2] in 67.7% yield. Subsequently addition of ethylchloroformate to the compound[2] gave rise to the 8-hydroxy-7-ethylcarboxy-9, 10-dimethoxy-2, 3-methylenelioxy-13-oxo-norochotensane[3] in 78% yield. Treatment of the compound[3] with bis-(2-chloroethyl)amine then lead to the 7-bis(2-chloroethyl)carbamyl-norochoteneare[4]. On the other hand the compound[5], which is the 8-methoxynorochotensane, was derived when compound[1] was treated with methanol in a few drops of BF. Treatment of the compound[6], and the compound[7], 7-bis(2-chloroethyl)-carbanyl-8-methoxy-norocheyensane, was then synthesized by reaction of the compound[6] with bis(2-chloroethyl) amine. In the other synthetic pathway when compound[5] was treated with $POCl_3$ in dried benzene, 13-chloro-6-ene-norochetensane[8] with 42% yield was formed. Finally the 13-bis-(2-chloroethyl) amino-8-methoxy-norochotensane[9] was produced when we treated the compound[8] with bis-(2-chloroethyl) amine. In another pathway, reaction between phenolbetaine which is the precursor of the compound[1] and benzoylchloride in dried chloroform gave us the 5,6,7 trihydro-2, 3-methylene-dioxy-9-chloromethyl-10, 11-dimethoxyphenylisoquinoline-8-benzoate[10] in 73% yield. The results of biological activities for these compounds are also presented in Table I and II.